Filter
Second filter
Third filter
Fourth filter

Actuators

In this category you can find various actuators suitable for all kinds of DIY projects. Some of them are servo and stepper motors, buzzers, relays, etc.

Showing 1–24 of 96 results

Sort by:
Nokia 5110 monochrome LCD breakout
Nokia 5110 monochrome LCD breakout

The Nokia 5110 breakout is yet another in our series of modules that bring the classic Nokia 5110 LCD display to life in your modern projects. With its core being the TXB0104QPWRQ1 for efficient voltage-level conversion, this board bridges the gap between your microcontroller and the display, regardless of their voltage differences.

 

Whether you are an experienced engineer or just starting out, this breakout board is designed to inspire and enable your creativity. Its blend of advanced technology and user-friendly features makes integrating the Nokia 5110 display into your projects not just possible, but enjoyable. Dive into your next adventure with this board and let your imagination light up pixel by pixel!

ULX3S 12F FPGA board
ULX3S 12F FPGA board

The ULX3S is a fully open source, compact, robust and affordable FPGA board equipped with a balanced spectrum of extra components and expansions.

 

The ULX3s offers a wide selection of useful features and interfaces that enable it to serve as a broad spectrum module for installation in complex devices.
Onboard peripherals such as SDRAM, USB, Digital video out, FM/ASK antenna, ADC and DAC can make it audio/video powerhouse for signal processing and synthesis, motor control or SDR cases. You can emulate arcade machines or retro computers like Minimig (Amiga) or modern systems like F32C (MIPS/RISCV). It has 56 GPIO pins, all routed as differential pairs and a PMOD compatible pinout, opening it to a wide range of expansion options. If you are just starting with FPGA, you can also use the ULX3S as powerful Arduino and program it using Arduino IDE in seconds.

 

ULX3S uses powerful Lattice Semiconductor ECP5 series FPGA chip supported by the latest open-source toolchains. This makes the ULX3S one of the most powerful and desirable platforms for FPGA enthusiasts available today. ULX3S comes equipped with onboard WiFi, display, buttons, LEDs and storage. Flash it using the WiFi connection (over-the-air update), or with one of the bitstreams stored on SD card and browsed by onboard OLED display and buttons. Due to its battery-backed RTC, it can power down completely and wake up only on certain events making it useful for low power applications.

 

It has been actively developed since 2016 and is the result of collaboration between Radiona.org / Zagreb Makerspace and FER – Faculty of Electrical Engineering and Computing – University of Zagreb, Croatia.
ULX3S is being actively used in Digital Logic class at the University of Zagreb Faculty of Electrical Engineering and Computing, Croatia.

ULX3S 85F FPGA board
ULX3S 85F FPGA board

The ULX3S is a fully open source, compact, robust and affordable FPGA board equipped with a balanced spectrum of extra components and expansions.

 

The ULX3s offers a wide selection of useful features and interfaces that enable it to serve as a broad spectrum module for installation in complex devices.
Onboard peripherals such as SDRAM, USB, Digital video out, FM/ASK antenna, ADC and DAC can make it audio/video powerhouse for signal processing and synthesis, motor control or SDR cases. You can emulate arcade machines or retro computers like Minimig (Amiga) or modern systems like F32C (MIPS/RISCV). It has 56 GPIO pins, all routed as differential pairs and a PMOD compatible pinout, opening it to a wide range of expansion options. If you are just starting with FPGA, you can also use the ULX3S as powerful Arduino and program it using Arduino IDE in seconds.

 

ULX3S uses powerful Lattice Semiconductor ECP5 series FPGA chip supported by the latest open-source toolchains. This makes the ULX3S one of the most powerful and desirable platforms for FPGA enthusiasts available today. ULX3S comes equipped with onboard WiFi, display, buttons, LEDs and storage. Flash it using the WiFi connection (over-the-air update), or with one of the bitstreams stored on SD card and browsed by onboard OLED display and buttons. Due to its battery-backed RTC, it can power down completely and wake up only on certain events making it useful for low power applications.

 

It has been actively developed since 2016 and is the result of collaboration between Radiona.org / Zagreb Makerspace and FER – Faculty of Electrical Engineering and Computing – University of Zagreb, Croatia.

 

ULX3S is being actively used in Digital Logic class at the University of Zagreb Faculty of Electrical Engineering and Computing, Croatia.

 

DC connector breakout
DC connector breakout

Simple breakout that allows access to standard 2.4 mm pins of a DC connector.

1-channel relay board with easyC
1-channel relay board with easyC

Did you ever wanted to turn on and off a device that needs large current or voltage? Whether operating on DC or AC, a relay is what you need. A relay is actually an electronic switch that is activated by a signal we send from a Dasduino or Arduino. This module further simplifies the whole process because it contains everything you need for the relay to work, and you just have to connect it to the microcontroller and power supply. You don’t have to think about voltages and currents, insulation between high and low voltage or grounding, everything is already taken care of on the board.

 

This board has easyC connector. Thanks to easyC ecosystem, this board can be connected using off-the-shelf cables, without soldering. Controlling the is as simple as it gets, too.

Servo motor TowerPro SG90
Servo motor TowerPro SG90

Sg90 servo is the type of motor that can turn the lever that is hitched to it very precisely and in that way control different things. This little servo motor is great for education and demonstration, but can also be used for real things that do not need great power for circumvolution (for example small vents).

Servo motor TowerPro MG995, 180 degrees
Servo motor TowerPro MG995, 180 degrees

MG995 servo is a powerful servo motor that is capable of spinning and controlling things that a small hobby servo motor could never accomplish doing. It comes with a bunch of accessories so you could connect it easily with the outer world, and it’s being controlled like every other servo motor, via PWM.

 

RPM: 0.20s/60 degrees (4.8V), 0.16s/60 degrees (6V)
Voltage: 4.8V – 6.6V
Torque: 9.4kg/cm (4.8V) – 11kg/cm (6V)
Angle: 180 degrees
Dimensions: 40mm x 20mm x 43mm
Weight: 55g

Servo motor TowerPro MG995, 360 degrees
Servo motor TowerPro MG995, 360 degrees

MG995 is a powerful servo motor that is capable of spinning and controlling things that a small hobby servo motor could never accomplish doing. It comes with a bunch of accessories so you could connect it easily with the outer world, and it’s being controlled like every other servo motor, via PWM.

• RPM: 0.20s/60 degrees(4.8V), 0.16s/60 degrees(6V)

• Voltage: 4.8V – 6.6V

• Torque: 9.4kg/cm(4.8V) – 11kg/cm(6V)

• Angle: 360 degrees

• Dimensions: 40mm x 20mm x 43mm • Weight: 55g

Servo motor TowerPro MG958
Servo motor TowerPro MG958

MG995 is a powerful servo motor that is capable of spinning and controlling things that a small hobby servo motor could never accomplish doing. It comes with a bunch of accessories so you could connect it easily with the outer world, and it’s being controlled like every other servo motor, via PWM.

Stepper motor with driver
Stepper motor with driver

If you’ve ever wanted to make something with a stepper motor, this is a great place to start. A stepper motor is a type of motor that can control its revolutions very precisely, so it is used for precise control and positioning.

This set comes with a small stepper motor and a driver for it. Namely, the stepper motor needs to be controlled in an exact way in order to get what you want from it (which is a precise turn), so the driver helps us with that. Also, the driver provides enough current to turn the motor.

This stepper motor driver enables the control of a stepper motor that does not need more than 800mA of current and operates at a voltage of up to 14V. In addition to the driver, it also has built-in LEDs that indicate which phase of the motor is currently active.

NEMA17 stepper motor
NEMA17 stepper motor

NEMA17 is a smaller stepper motor with high precision. Often we find it in 3D printers and small CNC machines since it has sufficient power to move small items. You will also use it in the 3D printer, CNC, robot or for the accurate control of anything which turns or moves.

We recommend the A4988 stepper motor driver.

Basic stepper driver
Basic stepper driver

This driver for stepper motor enables control over a stepper motor that does not require more than 800mA of current and works at up to 14V voltage. Except for the driver, it has built-in LED lights that indicate which phase of the motor is currently active. Connecting with microcontroller is easy, and control is directly through the library.

 

Stepper motor driver DRV8825 board
Stepper motor driver DRV8825 board

The stepper motor driver enables very precise control of the stepper motor. The DRV8825, located on this board, enables microstepping of a bipolar motor with an adjustable current limit, overcurrent and overtemperature protection. Controls steps up to 1/32 step. It has a potentiometer for setting the desired current.

 

• Voltage: 8.2V – 45V
• Current: 1.5A per phase without heatsink, 2.2A per phase with heatsink
• Dimensions: 38 x 22mm

Stepper motor driver ULN2003
Stepper motor driver ULN2003

This driver for stepper motor enables control over a stepper motor that does not require more than 500mA of current and works at 5V-12V voltage. Except for the driver, it has built-in LED lights that indicate which phase of the motor is currently active. Connecting on Croduino/Arduino is simple, and control is directly through the library.

 

Stepper motor driver A4988
Stepper motor driver A4988

Stronger driver for stepper motor which has more options than the classical ULN2003. It comes in small packaging and you could easily control the size of its steps.

 

TMC2208 Stepper motor driver
TMC2208 Stepper motor driver

This TMC2208 module can be used to control stepper motors up to 2 A for 3D-Printing, Cameras, Scanners and other equipment.

 

  • Power supply: 4.75 … 29 V
  • Current: 2 A
  • Maximum current: 2.8 A
  • Communication: UART
Mini DC motor
Mini DC motor

We all know these Mini DC motors, especially if you ever took apart any kind of toy. They’re everywhere, now and on Soldered as well. You can use it to make something useful or just reminisce about the times when you were younger.

DC motor
DC motor

We all know these little DC motors, especially if you’ve ever disassembled any toy. They are everywhere, and now at the Soldered.com.

 

DC motor 15RPM
DC motor 15RPM

DC motors can be inconvenient to use on low speed. With the help of mechanic and transfer using sprockets speed of this motor is slowed to a remarkably small speed. It is used for precise control over many mechanisms from robot wheels to precise mechanics.

 

• Voltage: 3V
• Axle diameter: 3mm
• Dimensions
: 12mm x 10mm x 36mm

DC motor 30RPM
DC motor 30RPM

DC motors can be inconvenient to use on low speed. With the help of mechanic and transfer using sprockets speed of this motor is slowed to a remarkably small speed. It is used for precise control over many mechanisms from robot wheels to precise mechanics.

 

• Voltage: 3V
• Axle diameter: 3mm
• Dimensions
: 12mm x 10mm x 36mm

DC motor 100RPM
DC motor 100RPM

DC motors can be inconvenient to use on low speeds. With the help of mechanics and transfer using sprockets speed of this motor is slowed to a remarkably small speed. It is used for precise control over many mechanisms from robot wheels to precise mechanics.

DC motor 150RPM
DC motor 150RPM

DC motors can be inconvenient to use on low speed. With the help of mechanic and transfer using sprockets speed of this motor is slowed to a remarkably small speed. It is used for precise control over many mechanisms from robot wheels to precise mechanics.

 

• Voltage: 3V
• Axle diameter: 3mm
• Dimensions
: 12mm x 10mm x 36mm

Out of stock DC motor 200RPM
DC motor 200RPM

DC motors can be inconvenient to use on low speed. With the help of mechanic and transfer using sprockets speed of this motor is slowed to a remarkably small speed. It is used for precise control over many mechanisms from robot wheels to precise mechanics.

 

• Voltage: 3V
• Axle diameter: 3mm
• Dimensions
: 12mm x 10mm x 36mm

Buzzer speaker
Buzzer speaker

In a buzzer speaker, current is run through a coil of wire that produces a magnetic field. The flexible ferromagnetic disc is attracted to the coil when current is flowing through it and returns to a “rest” position when current is not flowing through the coil. The sound from the buzzer speaker is produced by moving a ferromagnetic disc in a similar way to a cone in a speaker.

items per page