Filter
Second filter
Third filter
Fourth filter

Actuators

In this category you can find various actuators suitable for all kinds of DIY projects. Some of them are servo and stepper motors, buzzers, relays, etc.

Showing 73–93 of 93 results

Sort by:
NEMA17 motor holder
NEMA17 motor holder

This holder allows firm positioning of NEMA17 motors. It is made of steel, L-shaped and painted black.

NEMA23 motor holder
NEMA23 motor holder

This holder allows firm positioning of NEMA23 motors. It is made of steel, L-shaped and painted black.

Display OLED I2C 0.96" SSD1306
Display OLED I2C 0.96" SSD1306

Looking to add visuals to your Arduino projects? The I2C OLED breakout board is perfect for that. Because of its high contrast, you will be in awe of its crispness! The display is made from hundreds of LEDs, each representing one pixel in a 128×64 grid. Thus, it doesn’t need any backlight, and it needs less power than the classic LCD screens. That’s 8192 pixels all individually lit at your fingertips!

The design is 5V ready with an onboard regulator, so is compatible with any 3.3V board. The breakout board uses only about 20 mA, depending on active pixels. It is easy to control over the I2C interface. It is even easier to connect with the easyC system – no soldering required!

 

 

Display OLED I2C 0.96″ SSD1306 options:

 

The color of the OLED screen on the product can be:

– White
– Blue

LCD display 20x4 blue/white
LCD display 20x4 blue/white

LCD display with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 20 symbols in four lines and therefore can be used in many projects that need to send clearly visible and legible output information.

LCD display 16x2 red/black
LCD display 16x2 red/black

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

 

• The color of symbols: red
• Backlight: black
• Dimensions: 80 x 36 x 12 mm
• Screen dimensions: 64.5 x 16 mm
• Voltage: 5V
• Comes with 16-pin flat, non-soldered male header.

Out of stock LCD display 16x2 I2C white/blue
LCD display 16x2 I2C white/blue

LCD display with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information. An I2C LCD adapter is soldered to this LCD screen, which enables characters to be displayed on the LCD screen via the I2C bus. It also has an easyC connector for a really simple connection.

Graphic LCD display 128x64 blue
Graphic LCD display 128x64 blue

LCD display with one ST7920 controller displays text, symbols or any other characters that are a product of Croduino/Arduino. With an ability to display 128 characters in 64 rows, it will find its usage in many projects that are required to show clear and readable output information.

 

LCD display 16x2 white/black
LCD display 16x2 white/black

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

 

• The color of symbols: white
Backlight: black
Dimensions: 80 x 36 x 12 mm
Screen dimensions: 64.5 x 16 mm
Voltage: 5V
• Comes with 16-pin flat, non-soldered male header.

LCD display 16x2 orange/black
LCD display 16x2 orange/black

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

 

• The color of symbols: orange
• Backlight: black
• Dimensions: 80 x 36 x 12 mm
• Screen dimensions: 64.5 x 16 mm
• Voltage: 5V
• Comes with 16-pin flat, non-soldered male header.

LCD display 16x2 blue/black
LCD display 16x2 blue/black

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

LCD display 16x2 yellow/black
LCD display 16x2 yellow/black

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

 

• The color of symbols: yellow
• Backlight: black
• Dimensions: 80 x 36 x 12 mm
• Screen dimensions: 64.5 x 16 mm
• Voltage: 5V
• Comes with 16-pin flat, non-soldered male header.

LCD display 16x4 white/blue
LCD display 16x4 white/blue

LCD screen with HD44780 controller enables you to display text, symbols, values or anything else coming from Croduino/Arduino. It is capable of displaying 16 characters in 4 lines and is useful in many projects that need to send clearly visible and legible output information.

 

 

Smart LED WS2812B Ring12
Smart LED WS2812B Ring12

WS2812B is an extremely interesting LED that can emit light in red, green or blue – or any combination of these three colors, able to show a total of approximately 16 million different colors. On this board diodes are arranged in a circle. They are controlled by a single pin with only few lines of code from Arduino IDE. That’s possible thanks to the integrated controller inside the LED itself!

Smart LED WS2812B Ring24
Smart LED WS2812B Ring24

WS2812B is an extremely interesting LED that can emit light in red, green or blue – or any combination of these three colors, able to show a total of approximately 16 million different colors. On this board diodes are arranged in a circle. They are controlled by a single pin with only few lines of code from Arduino IDE. That’s possible thanks to the integrated controller inside the LED itself!

Water pump 12V
Water pump 12V

This water pump is extremely easy to use. Soak it in the water or liquid that you want to pump, add a tube to the drain and connect it to the power supply. You can also immerse the pump in the liquid you want to decant. In that case you don’t need to attach a inlet tube in this case. It operates at 12V and is able to expel 240L of fluid per hour.

 

• Voltage: 12V
• Max. height fluid can reach: 300cm
• Flow rate: 240L/h
• External diameter of drainage tube: 8mm
• Pump dimensions: 55 x 52 x 41 mm

Middle wheel for robotic projects
Middle wheel for robotic projects

This middle wheel will help you keep balance with 2-wheeled robotic sets.

Step-up module 150W
Step-up module 150W

Smaller booster (step-up) module. It increases input voltage to the desired level.

 

Panel power supply 12V 3W HLK-PM12
Panel power supply 12V 3W HLK-PM12

The HLK series power supply makes it very easy to convert high AC voltage to low DC voltage. It does not require external components, although it is recommended to add a fuse and capacitors to the AC input. High efficiency, with overload and short circuit output protection. It meets UL and CE criteria.

 

Input voltage: 90V – 264V AC
• Output voltage: 12V
• Output current: 250mA
• Dimensions: 34 x 20.2 x 15 mm

Panel power supply 3.3V 3W HLK-PM03
Panel power supply 3.3V 3W HLK-PM03

The power supply from the HLK series enables a very simple conversion of high AC voltage into low DC voltage. It does not require external components, although it is recommended to add a fuse and capacitors to the AC input. High efficiency, with protection against overload and short circuit output, meets UL and CE criteria.

 

• Input voltage: 90V – 264V AC
• Output voltage: 3.3V
• Output current: 900mA
Dimensions: 34 x 20.2 x 15 mm

Out of stock Panel power supply 5V 3W HLK-PM01
Panel power supply 5V 3W HLK-PM01

The HLK series power supply makes it very easy to convert high AC voltage to low DC voltage. It does not require external components, although it is recommended to add a fuse and capacitors to the AC input. High efficiency, with overload and short circuit output protection. It meets UL and CE criteria.

 

Input voltage: 90V – 264V AC
Output voltage: 5V

• Output current: 600mA
• Dimensions: 34 x 20.2 x 15 mm

Mini buzzer speaker
Mini buzzer speaker

In a buzzer speaker, current is run through a coil of wire that produces a magnetic field. The flexible ferromagnetic disc is attracted to the coil when current is flowing through it and returns to a “rest” position when current is not flowing through the coil. The sound from the buzzer speaker is produced by moving a ferromagnetic disc in a similar way to a cone in a speaker.

items per page