Actuators

DC motors can be inconvenient to use on low speeds. With the help of mechanics and transfer using sprockets speed of this motor is slowed to a remarkably small speed. It is used for precise control over many mechanisms from robot wheels to precise mechanics.

DC motors can be inconvenient to use on low speed. With the help of mechanic and transfer using sprockets speed of this motor is slowed to a remarkably small speed. It is used for precise control over many mechanisms from robot wheels to precise mechanics.

• Voltage: 3V
• Axle diameter: 3mm
• Dimensions: 12mm x 10mm x 36mm

An aluminum platform with four mountable rubber wheels and four DC motors. Because it’s easy to assemble, it’s great for various hobby and school (robotic) projects. There are many more slots on the platform for various position and distance sensors, LEDs, batteries and controllers.

• Material: aluminium
• Type: for four wheels
• Motor voltage: 3V – 6V
• Contents: four wheels with gearbox, aluminium plates, required screws and standoffs, battery holder

An aluminum platform with two mountable rubber wheels, two DC motors and balancing third (middle) wheel. Because it’s easy to assemble, it’s great for various hobby and school (robotic) projects. There are many more slots on the platform for various position and distance sensors, LEDs, batteries and controllers.

• Material: aluminium
• Type: for two wheels
• Motor voltage: 3V – 6V
• Contents: two wheels, two DC motors with gearbox, aluminium plate, middle wheel, required screws

Wheel for robotic projects (65mm in diameter) with black tires made of rubber. It will roll your every project, but it doesn’t come with a motor.

Wheel for robotic projects (65mm in diameter) with black tires made of rubber. It comes with a DC motor that runs from 3V to 6V, and will roll your every project!

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

• The color of symbols: orange
• Backlight: black
• Dimensions: 80 x 36 x 12 mm
• Screen dimensions: 64.5 x 16 mm
• Voltage: 5V
• Comes with 16-pin flat, non-soldered male header.

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

• The color of symbols: yellow
• Backlight: black
• Dimensions: 80 x 36 x 12 mm
• Screen dimensions: 64.5 x 16 mm
• Voltage: 5V
• Comes with 16-pin flat, non-soldered male header.

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

• The color of symbols: red
• Backlight: black
• Dimensions: 80 x 36 x 12 mm
• Screen dimensions: 64.5 x 16 mm
• Voltage: 5V
• Comes with 16-pin flat, non-soldered male header.

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

• The color of symbols: white
• Backlight: black
• Dimensions: 80 x 36 x 12 mm
• Screen dimensions: 64.5 x 16 mm
• Voltage: 5V
• Comes with 16-pin flat, non-soldered male header.

MG995 is a powerful servo motor that is capable of spinning and controlling things that a small hobby servo motor could never accomplish doing. It comes with a bunch of accessories so you could connect it easily with the outer world, and it’s being controlled like every other servo motor, via PWM.

For the purpose of automation in working with plants, there is an electronic valve for the water (or other liquid?). If you need a way to control some fluid using a microcontroller, here it is! It is actually the electronic solenoid which when activated, the fluid passes through his pipe, and if not – will not. Accepts pipe diameter of1/2 and at the inlet has a filter for all the unwanted particles.

It does not contain the pump or even some additional electronics, so make sure to have an external pump or use faucet water with pressure which is large enough. Systems that have a reservoir at a higher altitude than the valve, or to be exact, that apply the principle of hydrostatic pressure will not work because the pressure will not be large enough.

• Voltage: 12V DC
• For pipes with a diameter of 1 / 2inch

• Dimensions: 78 x 60 mm

Electromagnetic lock allows you to lock the door by a microcontroller or an external system. This one can hold up to 60kg with its electromagnet, which is just enough to when used with doors of the appropriate weight. Ideally, it should be used on smaller doors, windows and drawers. It is activated, that is “locked” when it is supplied current.

It consists of two parts, piece of an electromagnet and the metal. Comes with all necessary screws for installation.

We all know these Mini DC motors, especially if you ever took apart any kind of toy. They’re everywhere, now and on Soldered as well. You can use it to make something useful or just reminisce about the times when you were younger.

NEMA17 is a smaller stepper motor with high precision. Often we find it in 3D printers and small CNC machines since it has sufficient power to move small items. You will also use it in the 3D printer, CNC, robot or for the accurate control of anything which turns or moves.

We recommend the A4988 stepper motor driver.

Relay is a device with enables switching greater loads – ones that require more voltage/current. These relays can be found in our relays breakouts. It has NO and NC pins.

• Current needed for activation (current of Dasduino): 20mA
• Coil voltage: 5V
• Max. DC: 30V, 10A
• Max. AC: 250V, 10A

Smaller booster (step-up) module. It increases input voltage to the desired level.

H bridge supports an exchange of polarities on its outputs and therefore enables control of motor spins in both directions in a very simple way. It can also direct other devices that for certain usage require the exchange of polarities on their inputs.

In a buzzer speaker, current is run through a coil of wire that produces a magnetic field. The flexible ferromagnetic disc is attracted to the coil when current is flowing through it and returns to a “rest” position when current is not flowing through the coil. The sound from the buzzer speaker is produced by moving a ferromagnetic disc in a similar way to a cone in a speaker.