Best Selling

Dasduino Beginner Kit is a complete system for learning how to code and getting familiar with the main principles of electronics. With this set, you’ll be able to code the world and different electronic gadgets around you. Moreover, you’ll learn how to code your Dasduino (Arduino compatible board) in C programming language, connect electronic components and other things of importance in the electronics world. The best thing about this kit is that no experience in coding or electronics is required to get started.

This kit is an amazing choice for not only beginners, but schools, businesses, hobbyists and even colleges because it offers everything that is necessary for a individual to learn about electronics through their own project, while being at an affordable price.

Hobby version of Dasduino Beginner Kit has much more components than the basic version of the kit. It contains additional components and other actuators and sensors.

This kit consists of:

• Dasduino CORE + USB cable
• Set of cables for breadboard
• Breadboard
• 15x 10K resistor
• 25x 330ohm resistor
• 2x 5mm RGB LED diode
• 6x 5mm blue LED diode
• 6x 5mm red LED diode
• 6x 5mm yellow LED diode
• 6x 5mm green LED diode
• DHT
• 3x Photoresistor
• 6x Pushbutton
• Buzzer
• 3x MOSFET transistor IRF540
• 3x 2N2222 transistor
• Shift register 74HC595
• 6x Potentiometer 10k
• 3x Big pushbutton
• Relay, 1-channel
• LCD display 16×2
• 3x 1N4148 diode
• Ultrasonic distance sensor
• Motion sensor HC-SR501

The Inkplate 6 MOTION is a supercharged 6-inch e-paper display with a resolution of 1024×758 pixels and support for partial updates. It offers an accelerated refresh rate of 91 ms (up to 11 frames per second), significantly outperforming other DIY e-paper devices, providing smoother motion, less lag, and sharper updates. It also supports 4-bit grayscale, allowing a total of 16 shades on the screen. Powered by a dual-processor setup, the 32-bit STM32H743 microcontroller and ESP32-C3 co-processor, this versatile display integrates seamlessly into dynamic projects, enabling real-time content for applications like animations, interactive menus, or smart-home interfaces.

Its impressive sensor array includes the LSM6DSO32 accelerometer and gyroscope, Sensirion SHTC3 temperature and humidity sensor, and APDS-9960 gesture and proximity sensor, making it ideal for highly interactive environments. The front-facing RGB programmable LED adds customizable visual indicators, enhancing interactivity. Additional hardware features include a microSD card slot, USB-C programming port, multiple GPIO pins for expansions, RTC, a rotary encoder, and 3 button inputs on the sides. It can be easily expanded using the onboard easyC ecosystem if needed.

The device’s MCP73831 battery charger and low-power design (only 22 μA in low-power mode) ensure long-term performance on battery power. With full support for Arduino, as well as numerous ready-to-use examples, developers can quickly integrate the Inkplate 6 MOTION into a variety of projects, from real-time data displays to smart-home systems and digital signage. The Inkplate is, of course, 100% open-source.

Its eco-friendliness, along with high-quality craftsmanship, makes it an ideal choice for anyone looking to build sustainable and innovative electronic projects. The Inkplate 6 MOTION uses screens recycled from old e-book readers, which is extremely environmentally friendly. Although minor damage such as scratches is possible due to the screen recycling, all screens with significant damage are not used in production, ensuring high quality.

Inkplate 6 MOTION options: 

With e-paper display & enclosure: This version offers a sturdy and sleek enclosure for your device, made with precision from a 3D printer. It’s perfect for those who want an extra layer of protection without any added features.

With e-paper display, enclosure, and battery: Upgrade to this version if you’re looking for both protection and mobility. This option includes a 3D-printed enclosure as well as an 1200 mAh integrated battery, ensuring your device stays powered even on the go.

Without e-paper display: For those who prefer a simpler or alternative display solution, this version does not include the e-paper display. It’s ideal for users who have their own display solutions or prefer to use the device without a visual interface.

Choose the one that best fits your needs and enhance your experience!

This compact yet powerful breakout board brings your Arduino projects to life with its crystal-clear 2.4″ TFT display, allowing you to showcase your creativity in vivid detail. But that’s not all – with built-in touch sensitivity, navigating menus, selecting options, and interacting with your creations becomes as intuitive as a tap or swipe. Whether you’re designing a sleek user interface for your latest gadget or crafting an immersive gaming experience, this module offers the sensitivity and precision you need to captivate your audience.

Furthermore, integrating this breakout module into your Dasduino projects is very straightforward. Plus, with its SPI communication interface, you can easily exchange data between your Dasduino board and the display, unleashing your creativity without the hassle of complex wiring.

So whether you’re dreaming of a futuristic control panel, designing a personalized weather station, or building a portable gaming console, the TFT 2.4″ breakout module is your gateway to a world of captivating visuals and seamless interaction, all powered by Dasduino. Say hello to vibrant displays, touch-sensitive magic, and endless creativity – all in the palm of your hand.

If you’re like us, the first time you saw an e-reader, you thought to yourself, “I could do something with that.”. Thanks to clean lines, high contrast, daylight readability, and the remarkable level of energy efficiency that comes from drawing power only when changing the screen’s contents, the e-paper is uniquely suited to many applications. Following Inkplate 6 success, with Inkplate 10 we continue to make e-paper accessible to hobbyists and DIY product designers by offering a plug-and-play hardware platform that is super-easy to use and compatible with Arduino.

To name a few features, Inkplate 10 has a stunning 9.7″ inch e-paper display with refresh rate of 1.61s, greyscale mode, and partial updates support. Powered by ESP32, you will have a strong microcontroller with WiFi and Bluetooth at your disposal. It’s super-low-power (22uA) so you can use it for days, weeks, or months out of a single battery charge. There’s Li-ion battery charger, Real Time Clock (RTC), additional GPIO pins, and more. Using our Arduino library (100% compatible with Adafruit GFX), it’s 5 minute work to get the board running for you. The Micropython module is available as well. It’s 100% open-source for both software and hardware. What is especially interesting is that Inkplate uses recycled screens taken from old e-book readers, which is very environmentally friendly, but you have to keep in mind that some screens may have small scratches because of this. All screens with large scratches and damages are not used at all.

Inkplate 10 options:

With e-paper display & enclosure: This version offers a sturdy and sleek enclosure for your device, made with precision from a 3D printer. It’s perfect for those who want an extra layer of protection without any added features.

With e-paper display, enclosure, and battery: Upgrade to this version if you’re looking for both protection and mobility. This option includes a 3D-printed enclosure as well as an integrated battery, ensuring your device stays powered even on the go.

Without e-paper display: For those who prefer a simpler or alternative display solution, this version does not include the e-paper display. It’s ideal for users who have their own display solutions or prefer to use the device without a visual interface.

Choose the one that best fits your needs and enhance your experience!

If you’re looking for a microcontroller simple-to-use, yet powerful enough for a wide variety of applications, look no further from our connectplus. From low-power sensor networks to demanding tasks such as streaming music, MP3 encoding, and voice recording, this microcontroller can do it all. Dasduino CONNECTPLUS comes with integrated Wi-Fi and Bluetooth 4.2, which enable low-energy secure connections with data packet length extensions. It uses the powerful ESP32 controller with 4 MB integrated flash and 8 MB integrated PSRAM.

Dasduino CONNECTPLUS is 69 mm wide and 26 mm high. It fits on a standard breadboard for faster prototyping and works for most projects. It offers plenty of external connections with its 30 pins.You can simply connect the board to your computer with the standard USB Type-C cable and program it with Arduino IDE. The easyC port lets you connect the CONNECTPLUS easily with other I2C devices. The JST battery connector and onboard charger lets you make your projects truly wireless. There is more: full RGB WS2812 LED, reset and user button, onboard protections and more. It comes with USB-C cable.

Dasduino CONNECTPLUS (ESP32) options:

The Dasduino CONNECTPLUS comes in 3 versions depending on the method of establishing a connection to the pins:

– without headers
– with male headers
– with female headers

If you are looking for a simple way to learn soldering, or just want to make a small gadget that you can carry, this soldering kit is a great opportunity. Simon says game is an educational kit which teaches you how to solder, and in the end, you get to have your own small game. The goal of the game is to press the buttons in the same order as LED turn on. With every correct answer, the game gets a bit harder. How many correct answers can you get?

It’s based on Attiny404 microcontroller, programmed in Arduino. At its back, you’ll find CR2032 battery which makes the kit portable. There’s keychain holder as well. Soldering process is easy enough based on the mark on the PCB.

The kit consists of:
• PCB
• Attiny404 microcontroller
• 4 LEDs
• 4 Pushbuttons
• A switch
• 4 resistors 330ohm
• CR2032 battery holder
• Battery CR2032
• Keychain holder

Looking to add visuals to your Arduino projects? The I2C OLED breakout board is perfect for that. Because of its high contrast, you will be in awe of its crispness! The display is made from hundreds of LEDs, each representing one pixel in a 128×64 grid. Thus, it doesn’t need any backlight, and it needs less power than the classic LCD screens. That’s 8192 pixels all individually lit at your fingertips!

The design is 5V ready with an onboard regulator, so is compatible with any 3.3V board. The breakout board uses only about 20 mA, depending on active pixels. It is easy to control over the I2C interface. It is even easier to connect with the easyC system – no soldering required!

Display OLED I2C 0.96″ SSD1306 options:

The color of the OLED screen on the product can be:

– White
– Blue

Obstacle sensor, based on TCRT5000, uses infrared diode and photo-receiver to detect obstacle in front of it – emitted light just reflects back to the sensor. Onboard, you’ll find voltage comparator, so just by adjusting the potentiometer, the board gives digital output. There’s LED DO onboard to show the current digital output status. There’s analog output as well, in case you need it. Sensor works particularly well for line-following purposes on small robots.

• Sensor: TCRT5000
• Comparator: LM303
• Dimensions: 22 x 22 mm