Connectors & Headers

Classical male header with 2.54mm pin spacing (0.1 ‘). 40-pin.

Screw terminal for PCB with the legs width of 5mm with 2 contacts.

A female connection that is usually found on our power supplies. For use with our controllers and amplifiers.

USB Type C Female to USB type A Male Converter.

Screw terminal for a printed circuit board with a width of 3.81 mm with three contacts.

Simple breakout that allows access to standard 2.4 mm pins of a DC connector.

If you are working with audio peripherals and you need a simple 3.5mm conncetor, look no further. This connector has 3 terminals and works with 3.5mm male connector.

Screw terminal for PCB with a leg width of 5mm. It has three contacts.

A PCB screw terminal with a lead width of 3.5mm, three contacts.

• Number of contacts: 3
• Distance between contacts: 3.5mm

PCB terminal with a leg width of 5mm with two contacts. This terminal is “hot plug”, which means that it does not require a screwdriver to insert the wires into it, it is simply pressed from above and the wires are inserted.

PCB temrinal with a leg width of 5mm with two contacts. This terminal is “hot plug”, which means that it does not require a screwdriver to insert the wires into it, it is simply pressed from above and the wires are inserted.

• Number of contacts: 2
• Distance between contacts: 3.5mm

The USB Type-A connection is still prevalent. If it’s in the electronic devices everywhere around us, it is only natural that we’d want it in our electronic projects. Adding a USB Type-A connection to your circuit is as easy as pie with this breakout board.

The breakout board breaks the GND, D+, D-, and VUSB pins out to the plated through-holes.

Product usage tips:

Male headers for the pads are added and need to be soldered. The breakout board has two mounting holes for placing it on different surfaces.

The USB Type-A connection is still prevalent. If it’s in the electronic devices everywhere around us, it is only natural that we’d want it in our electronic projects. Adding a USB Type-A connection to your circuit is as easy as pie with this breakout board.

The breakout board breaks the GND, D+, D-, and VUSB pins out to the plated through-holes.

Dimensions: 22 mm x 22 mm
Connectors: USB Type-A (female)
Mounting holes: 2

If you are working with audio and need easy access to all the pins of the 3.5mm connector, this breakout makes it possible. It accepts a male 3.5mm connector, in a 4-pin version, and allows access to all connector pins on the header.

Dimensions: 22 mm x 22 mm
Board connector: 3.5mm female, accepts 3.5mm male
Connections: ground, speaker right, speaker left, microphone
Mounting holes: 2

The USB Type-C is ubiquitous. We always wanted to add it to our electronics projects, and we’re sure you did too. Adding a USB Type-C connector to your projects is easier than ever thanks to this USB Type-C breakout board. It will allow you to send data to your device, as well as add power to the circuit.

The USB Type-C connector’s GND, CC2, SBU2, D-, D+, SBU1, CC1, and VUSB pins are broken out to the plated through-holes.

Product usage tips:

Male headers that are included need to be soldered to the board. The breakout board has two mounting holes and can be placed on any surface.

The MicroUSB is still everywhere around us, even though it’s slowly being replaced with USB Type-C. We’re sure you wanted to add it to your electronics projects. We did, too, that’s why we added the MicroUSB female connector breakout board to our roster!

The Micro B USB connector’s GND, ID, D+, D-, and VCC pins are broken out to the plated through-holes.

Product usage tips:

The pins included need to be soldered to the board. It won’t move an inch when mounted with the two mounting holes.

Classic male header with a pin spacing of 2.54mm (0.1″). The pin layout is 20 x 2.

This RF converter is used to connect coaxial cables. The converter has a male input on one side and a male output on the other.

This connector allows the connection of an antenna with a male SMA connector to a board at a 90-degree angle.

Classic current adapter from switching the american to european type connector.

• Dimensions: 25.5 x 30 x 14mm

USB type C female connector for PCBs. This connector allows only power but not communication.

IPX SMD connector for soldering to the printed circuit board. It is most commonly used with antennas, and the impedance is 50 ohms.

JST (more specifically JST PH) connectors are nowadays the most common connectors for rechargeable lithium batteries, but they are also used for many other applications where fast, easy and favorable connection is required.

SMD connector for BBC micro:bit board. 40 pins.