Filter
Second filter
Third filter
Fourth filter

Microcontrollers

This category includes the microcontrollers we offer. For example ESP8266, ESP32, ATmega328P, ATtiny804, ATtiny404 etc.

Showing all 6 results

Sort by:
Atmega328P SMD microcontroller
Atmega328P SMD microcontroller

Well known and popular 8-bit Atmel microcontroller which is used on the majority of modern Arduino boards as well as on Dasduino. This one is the SMD version, just as the one on Dasduino, which is used for soldering on PCBs and for usage in projects.

Out of stock ESP8266 ESP-12 WiFi Module
ESP8266 ESP-12 WiFi Module

ESP8266 is an IC that delivers a true revolution in the world of makers, especially in the world of IoT (Internet of Things). This is a complete 32-bit SoC (System on Chip) with built-in flash memory, frame and EEPROM which can even be programmed directly from the Arduino interface, without the need for additional micro-controller. With all this, the most important point is that in itself has a built-in WiFi (AP, STA, AP + STA), all that for “little money”.

ESP8266 in this form (ESP-12) is suitable for direct soldering to a printed circuit board as an SMD component or directly solder the wires since the pin has its holes. It also comes with a PCB trace antenna.


 

Note: ESP8266 is an IC that works at 3.3V! Connecting directly to 5V, or track Arduino or Croduino plate will destroy it! Use logic level converter.

 

ESP32-WROOM-32D WiFi module
ESP32-WROOM-32D WiFi module

The ESP32 is a more advanced successor to the well-known ESP8266. It is a SoC (System on Chip) that can function as a standalone microcontroller and has everything you need on WiFi and Bluetooth 4.0 (BLE 4.0, low-energy) communication. With nearly 30 I / O pins and low power consumption, ESP32 will almost certainly be the leader in the Internet of Things for years to come.

The microcontroller itself works at a frequency of 160MHz (up to 240MHz), while the module has a built-in flash memory of 4MB. It has all the classic protocols like 4x SPI, 2x I2C, 4x UART, and there are many built-in peripherals like 18x 12-bit ADC, 2x 8-bit DAC, 10x capacitive touch GPIO, temperature sensor, SD card controller, Ethernet interface, PWM, etc. The list is really long. It should not be forgotten that this module has FCC certification and PCB trace antenna.

 

SoC: ESP32
CPU: Xtens 32-bit LX6, 160MHz to 240MHz
• Flash memory: 4MB
• RAM memory: 520kB
Exact module name: ESP-WROOM-32
• Number of pins: 38
Dimensions: 18 x 25.5 x 2.8 cm

ESP32-WROVER WiFi module
ESP32-WROVER WiFi module

ESP32-WROVER is a powerful microcontroller which has the possibility of wide application as it is possible to modify the processor clock and use its substantial memory. For these reasons, ESP32-WROVER can be used not only in conditions where low power consumption is required but also in situations where high speed is required to process large amounts of data.

The ESP32-WROVER comes with a PCB antenna and offers WiFi and Bluetooth 4.2 connectivity. The core of the module is the ESP32-D0WDQ6 chip. The operating frequency ranges from 80MHz up to 240MHz and the microcontroller can be used with 4MB of flash memory. The freeRTOS operating system drives the ESP32.

SoC: ESP32
Number of pins: 38
Number of GPIO pins: 32
Voltage: 2.3 V – 3.6 V, recommended: 3.3 V
Current: maximum 500 mA, average 80 mA
Operating temperature: -40 – 85 ° C
Chip: ESP32-D0WDQ6
Microprocessors: Xtensa 32-bit LX6
Flash: 4 MB
PSRAM: 8 MB
Dimensions: 18 x 31 x 3.30 mm

IC SOIC-14 ATTiny404
IC SOIC-14 ATTiny404

The ATtiny404 is an 8-bit microcontroller based on the AVR architecture, offering a high-performance and low-power solution for various embedded applications. With its compact size and versatile features, it is well-suited for small-scale projects that require efficient control and processing capabilities.

This microcontroller operates within a voltage range of 1.8V to 5.5V, making it compatible with a wide range of power supplies. It features 4KB of Flash memory for program storage, allowing for the implementation of complex algorithms and functions. Additionally, it has 256 bytes of SRAM for data storage, providing a temporary workspace for variables and computations.

Overall, the ATtiny404 microcontroller provides a reliable and versatile platform for embedded systems development, offering a balance between processing power, memory capacity, and power efficiency. It is suitable for a wide range of applications, including IoT devices, sensor nodes, control systems, and other low-power embedded projects.

IC SOIC150-14 ATTiny804
IC SOIC150-14 ATTiny804

ATtiny804 8-bit microcontroller features the 8-bit AVR processor with hardware multiplier, running at up to 20MHz. The ATtiny804 include up to 8KB Flash, 512B SRAM, and 128 bytes of EEPROM in a compact 14-pin package.

The ATtiny804 MCU integrates a flexible and low power architecture including Event System and SleepWalking, accurate analog features, and advanced peripherals. The tinyAVR microcontrollers are well-suited for a wide range of applications including industrial, consumer, appliances, automotive and Internet of Things (IoT) sensor nodes.

items per page