In this category there are various electronic components that we offer. Resistors, capacitors, transistors, connectors, etc.
Showing 217–240 of 248 results
The MC34063N integrated circuit is easy to use and contains all the primary circuits needed to build simple DC-DC converters. These devices primarily consist of an internal temperature-compensated reference, a comparator, an oscillator, a PWM controller with active current limiting, a driver, and a high-current output switch.
Are you repairing or developing electronic boards? This set of inductors is incredibly useful because you will never have to think again if you have that specific inductor. It consists of 52 different values each of which comes in an amount of 50 pieces.
• Package: 0603
• 25 pcs of 52 values = 1300 pcs
• Values [H]:
1nH, 10nH, 100nH, 1uH, 10uH
1.2nH, 12nH, 120nH, 1.2uH, 12uH
1.5nH, 15nH, 150nH, 1.5uH, 15uH
1.8nH, 18nH, 180nH, 1.8uH, 22uH
2.2nH, 22nH, 220nH, 2.2uH,
2.7nH, 27nH, 270nH, 2.7uH,
3.3nH, 33nH, 330nH, 3.3uH,
3.9nH, 39nH, 390nH, 3.9uH,
4.7nH, 47nH, 470nH, 4.7uH,
5.6nH, 56nH, 560nH, 5.6uH,
6.8nH, 68nH, 680nH, 6.8uH,
8.2nH, 82nH, 820nH, 8.2uH,
The Shunt Resistor is a special type of resistor with small resistance which allows large currents to pass through it. This is useful for measuring the current in a circuit: due to the Ohm’s law and voltage drop on the shunt resistor, we can know exactly which current passes through it. For example, for this resistor whose maximum current is 50A, the voltage drop at that current will be exactly 75mV (0.075V). Using a precise ADC, we can accurately measure the current of our consumer or power source.
• Max. current: 50A
• Voltage drop for max. current: 75mV
• Dimensions: 120mm x 25mm
100k ohm THT resistor with 5% tolerance and power of 1/4W.
Comes in a pack of 30 pieces.
This cabel switches your antenna with an SMA female connector to an N-type connector.
• Cable lenght: 1m
Simple SMD switch with three pins, convenient for tiles that do not need frequent changing of the switch. We recommend using it instead of jumpers.
Power connector with fuse
If you are working with audio peripherals and you need a simple 3.5mm conncetor, look no further. This connector has 3 terminals and works with 3.5mm male connector.
Compared to the NE555 timer, this device uses smaller timing capacitors because of its high input impedance. As a result, more accurate time delays and oscillations are possible. Power consumption is low across the full range of power supply voltage.
Panel pushbuttons may look ordinary but may look good as well, as this metal pushbutton with backlight. This pushbutton is waterproof, shock-proof and vandal-proof. Also comes with a backlight in a variety of colors.
Panel pushbuttons may look ordinary but may look good as well, as this metal pushbutton with backlight. This pushbutton is waterproof, shock-proof and vandal-proof. Also comes with a backlight in a variety of colors.
Panel pushbuttons may look ordinary but may look good as well, as this metal pushbutton with backlight. This pushbutton is waterproof, shock-proof and vandal-proof. Also comes with a backlight in a variety of colors.
Classic current adapter from switching the american to european type connector.
• Dimensions: 25.5 x 30 x 14mm
USB mini-b female connector for a printed circuit board (PCB). It’s identical to the one used on Croduino Basic.
If you have a device you want to connect to a WiFi network, by using an IPX connector, all you need is this antenna. Use the IPX connector to establish connection with your device and it is ready to connect to a 2.4GHz WiFi network.
WS2812B is a smart LED light source in which control circuit and RGB diode are integrated. Unlike traditional RGB light sources, the WS2812B is much easier to control since only one digital control signal is required. For more technical details, see the datasheet.
The WS2812B is a smart LED light source with an integrated control circuit and RGB diode. Unlike traditional RGB light sources, the WS2812B is much easier to operate since only one digital control signal is required.
Female header with 2.54mm (0.1 ”) classic pin spacing.
• Distance between pins: 2.54mm(0.1”)
• Number of pins: 4
Female header with 2.54mm (0.1 ”) classic pin spacing.
• Distance between pins: 2.54mm(0.1”)
• Number of pins: 5
Female header with 2.54mm (0.1 ”) classic pin spacing.
• Distance between pins: 2.54mm(0.1”)
• Number of pins: 6
Female header with 2.54mm (0.1 ”) classic pin spacing.
• Distance between pins: 2.54mm(0.1”)
• Number of pins: 7
Female header with 2.54mm (0.1 ”) classic pin spacing.
• Distance between pins: 2.54mm(0.1”)
• Number of pins: 8
Female header with 2.54mm (0.1 ”) classic pin spacing.
• Distance between pins: 2.54mm(0.1”)
• Number of pins: 9
Female header with 2.54mm (0.1 ”) classic pin spacing. Matches for Croduino NOVA.
• Pin spacing: 2.54mm(0.1”)
• Number of pins: 10