Filter
Second filter
Third filter
Fourth filter

Components

In this category there are various electronic components that we offer. Resistors, capacitors, transistors, connectors, etc.

Showing 25–48 of 248 results

Sort by:
Generic 5V voltage regulator TO-220 THT
Generic 5V voltage regulator TO-220 THT

LM 7805 is often used 5V linear regulator, this one is in the THT version.

 

Generic 5V voltage regulator THT 100mA
Generic 5V voltage regulator THT 100mA

7805 is often used 5V linear regulator, in this version of Through Hole (THT). It can only provide 100mA current at 5A it carefully used. Be sure to add the output decoupling capacitors.

 

Generic 5V voltage regulator DPAK SMD
Generic 5V voltage regulator DPAK SMD

78m05, often used 5V linear regulator in DPAK SMD package.

 

Generic 12V voltage regulator TO-220 THT
Generic 12V voltage regulator TO-220 THT

Generic (generally used) 5V linear regulator in Through Hole (THT) version. Be sure to add decoupling capacitors to the output.

Potentiometer 10k THT
Potentiometer 10k THT

Potentiometer of variable resistance of 10k which can be used on an experimental board, but it can also be installed in the housing. They can be used for various types of control, eg. Setting how the brightness of LEDs.

Potentiometer 100k THT
Potentiometer 100k THT

A 100k variable resistance potentiometer that fits the breadboard, but can also be built into the case due to the increased size. They can be used for various types of control, eg. adjusting how bright the LED is.

Potentiometer 500k THT
Potentiometer 500k THT

A 500k variable resistance potentiometer that fits the experimental board, but can also be built into the housing due to its increasing size. They can be used for various types of control, eg adjusting how bright the LED is.

Potentiometer 1M THT
Potentiometer 1M THT

A 1M variable resistance potentiometer that fits the breadboard, but can also be built into the case due to the increased size. They can be used for various types of control, eg. adjusting how bright the LED is.

Caps for THT potentiometer
Caps for THT potentiometer

Caps for THT potentiometer from our store that would make control much easier and would simply just look better.

Potentiometer 10k
Potentiometer 10k

Potentiometer with mutable resistance from 10k that corresponds with the breadboard. They can be used for various kinds of control, for example adjusting the intensity of LED lights. One of these is also in our Dasduino Beginner Kit.

Potentiometer RV24YN20S 10k
Potentiometer RV24YN20S 10k

RV24YN20S Potentiometer with variable resistance of 10k intended for housing installation. Comes with cap and dial. Carbon, usually used to adjust the speed of rotation of the motor on the inverter.

 

Pushbutton 12mm
Pushbutton 12mm

Large pushbutton will often be more practical than the small one (classic pushbutton). With dimensions of 12mm x 12mm it can be pushed in the breadboard, but it is also suitable for ordinary drill boards.

 

SPST panel box switch 17x13mm
SPST panel box switch 17x13mm

SPST (single-pole, single-throw) is a simple switch that connects or disconnects the two contacts in its casing.

 

Type: SPST
Shape: box
Max. current/voltage: 250VAC 10A
• Dimensions: 17mm x 13mm x 11mm (without contacts)

SPST panel switch 24x21mm
SPST panel switch 24x21mm

SPST (single-pole, single-throw) is a simple switch that connects or disconnects the two contacts in its casing.

 

Type: SPST
Shape: elongated
Max. current/voltage: 250VAC 10A

Panel switch, 12mm, red lighting
Panel switch, 12mm, red lighting

This built-in switch comes in a metal case and comes with backlighting in various colors. In addition, this switch is waterproof, shockproof and vandal-proof.

 

 

Panel switch, 12mm, blue lighting
Panel switch, 12mm, blue lighting

This built-in switch comes in a metal case and comes with backlighting in various colors. In addition, this switch is waterproof, shockproof and vandal-proof.

 

Panel switch, 12mm, white lighting
Panel switch, 12mm, white lighting

This built-in switch comes in a metal case and comes with backlighting in various colors. In addition, this switch is waterproof, shockproof and vandal-proof.

Panel switch, 12mm, green lighting
Panel switch, 12mm, green lighting

This built-in switch comes in a metal case and comes with backlighting in various colors. In addition, this switch is waterproof, shockproof and vandal-proof.

 

Panel key switch
Panel key switch

This interesting product enables you to control who has is allowed to turn on or turn off a circuit. Namely, in order to change the status of this switch, you need to put the key in the lock and turn it around.

 

 

DPDT panel switch
DPDT panel switch

Large DPDT (Dual Pole Dual Throw) panel mount switch. Breaks two wires simultaneously.

 

 

Out of stock Magnetic door / window switches
Magnetic door / window switches

These magnetic door switch sensors are already seen, if not – then in old movies for sure where they were used as anti-theft devices, ie. alarm systems. In fact, it is a magnet and the reed switch inside a pair. When they are close to each other (recommended 13mm or less), reed switch closes. Connect it to Croduino / Arduino as an ordinary switch use the detection of open doors, windows, drawers, cupboards etc.

 

• Voltage: max. 200V, best used 5V Croduino/Arduino
• Max reed power: 100mA
• Max detection distance: 15mm, 13mm recommended
• Dimensions: 29 x 14 x 9mm
• Cable length: 30cm

Reed switch
Reed switch

Reed switch is a switch that is activated within the range of the magnetic field. Within its glass capsule, it has two metal wires that will move when they are near the magnet and thus “activate” switch.

KIP switch
KIP switch

SPDT (single-pole, dual-throw) is a simple switch that connects the centre contact to one of the other two contacts located on its housing.

 

DIP switch, 2 way
DIP switch, 2 way

The DIP switch is a small switch that is simply used with breadboard or protoboard.

Number of poles: 2
Pitch: (2.54mm)

items per page