Components

Classic SMD LED size 0402.

Classic SMD LED size 0402.

Classic SMD LED size 0402.

Classic SMD LED size 0402.

Classic SMD LED size 0402.

Classic SMD LED size 0402.

WS2812B is a smart LED light source in which control circuit and RGB diode are integrated. Unlike traditional RGB light sources, the WS2812B is much easier to control since only one digital control signal is required. For more technical details, see the datasheet.

0603 resistor 100k ohm with 5% tolerance.

0603 resistor 330 ohm with 5% tolerance.

100k ohm THT resistor with 5% tolerance and power of 1/4W.

Comes in a pack of 30 pieces.

Classic capacitor 0603 1uF 16V, tolerance 10%.

It comes in a pack of 50 pieces.

The USB Type-A connection is still prevalent. If it’s in the electronic devices everywhere around us, it is only natural that we’d want it in our electronic projects. Adding a USB Type-A connection to your circuit is as easy as pie with this breakout board.

The breakout board breaks the GND, D+, D-, and VUSB pins out to the plated through-holes.

Product usage tips:

Male headers for the pads are added and need to be soldered. The breakout board has two mounting holes for placing it on different surfaces.

The USB Type-A connection is still prevalent. If it’s in the electronic devices everywhere around us, it is only natural that we’d want it in our electronic projects. Adding a USB Type-A connection to your circuit is as easy as pie with this breakout board.

The breakout board breaks the GND, D+, D-, and VUSB pins out to the plated through-holes.

Dimensions: 22 mm x 22 mm
Connectors: USB Type-A (female)
Mounting holes: 2

Potentiometers are well known all around, and the sliding potentiometer is just one of its versions. You’ve probably seen it in some music equipment, and now you have the chance to add it to your project!

• Type: linear
• Resistance: 10k
• Dimensions: 86 x 22 mm

WS2812B is an extremely interesting LED that can emit light in red, green or blue – or any combination of these three colors, able to show a total of approximately 16 million different colors. On this board diodes are arranged in a circle. They are controlled by a single pin with only few lines of code from Arduino IDE. That’s possible thanks to the integrated controller inside the LED itself!

If you are working with audio and need easy access to all the pins of the 3.5mm connector, this breakout makes it possible. It accepts a male 3.5mm connector, in a 4-pin version, and allows access to all connector pins on the header.

Dimensions: 22 mm x 22 mm
Board connector: 3.5mm female, accepts 3.5mm male
Connections: ground, speaker right, speaker left, microphone
Mounting holes: 2

WS2812B is an extremely interesting LED that can emit light in red, green or blue – or any combination of these three colors, able to show a total of approximately 16 million different colors. On this board diodes are arranged in a circle. They are controlled by a single pin with only few lines of code from Arduino IDE. That’s possible thanks to the integrated controller inside the LED itself!

WS2812B is an extremely interesting LED that can emit light in red, green or blue – or any combination of these three colors, able to show a total of approximately 16 million different colors. On this board, diodes are arranged in a line of 10. You can even connect these sticks in a line. They are controlled by a single pin with only a few lines of code from Arduino IDE. That’s possible thanks to the integrated controller inside the LED itself!

• Number of LEDs: 10
• Voltage: 5V
• LED type: WS2812B
• Current: max 60mA per LED
• Dimensions: 80 x 10 mm

WS2812B is an extremely interesting LED that can emit light in red, green or blue – or any combination of these three colors, able to show a total of approximately 16 million different colors. On this board, diodes are arranged in a circle. They are controlled by a single pin with only a few lines of code from Arduino IDE. That’s possible thanks to the integrated controller inside the LED itself!

These small LEDs are not just ordinary lights – each is unique because it has a built-in small integrated circuit (IC) that is able to turn on the LED light in 16 million different colors. IC is WS2812 and it uses a single wire that can control thousands of these LEDs. With a little imagination by putting these pixels, you get superior effects with a minimum effort. These lamps are easy to control with Dasduino.

The USB Type-C is ubiquitous. We always wanted to add it to our electronics projects, and we’re sure you did too. Adding a USB Type-C connector to your projects is easier than ever thanks to this USB Type-C breakout board. It will allow you to send data to your device, as well as add power to the circuit.

The USB Type-C connector’s GND, CC2, SBU2, D-, D+, SBU1, CC1, and VUSB pins are broken out to the plated through-holes.

Product usage tips:

Male headers that are included need to be soldered to the board. The breakout board has two mounting holes and can be placed on any surface.

The MicroUSB is still everywhere around us, even though it’s slowly being replaced with USB Type-C. We’re sure you wanted to add it to your electronics projects. We did, too, that’s why we added the MicroUSB female connector breakout board to our roster!

The Micro B USB connector’s GND, ID, D+, D-, and VCC pins are broken out to the plated through-holes.

Product usage tips:

The pins included need to be soldered to the board. It won’t move an inch when mounted with the two mounting holes.

Waterproof and high quality antenna connection cable, used as standard to connect LoRa antennas to the LoRa gateway.

• Connector A: SMA Male
• Connector B: N-Type Male
• Impedance: 50Ω
• Cable length: 1m

BC-327 is PNP transistor for generic usage in THT packaging.

• Type: PNP
• Part Number: BC-327