Components

10 pieces pack of crystal white LEDs.

3mm diffused LEDs are great for trying out and experimenting with LEDs.

IPX to SMA female cable will allow you easy connection with SMA male antenna to IPX connector which is, for example, a common case with a GSM antenna.

SMD connector for BBC micro:bit board. 40 pins.

High-quality spare probes for a multimeter.

Ordinary panel switch (pushbutton). Comes in various colors.

All real machines have an emergency stop button when pressed the whole machine stops. It can be very useful in case of the danger of someone working on that machine. If you want to install a similar thing on your project, here it is!

• Type: DPST
• Maximal voltage: 660V
• Maximal current: 10A
• Button diameter: 40mm
• Mounting hole diameter: 22mm
• Dimensions: 60 x 70mm

Female header with 2.54mm (0.1 ”) classic pin spacing.

• Distance between pins: 2.54mm(0.1”)
• Number of pins: 8

This interesting product enables you to control who has is allowed to turn on or turn off a circuit. Namely, in order to change the status of this switch, you need to put the key in the lock and turn it around.

The Shunt Resistor is a special type of resistor with small resistance which allows large currents to pass through it. This is useful for measuring the current in a circuit: due to the Ohm’s law and voltage drop on the shunt resistor, we can know exactly which current passes through it. For example, for this resistor whose maximum current is 50A, the voltage drop at that current will be exactly 75mV (0.075V). Using a precise ADC, we can accurately measure the current of our consumer or power source.

• Max. current: 50A
• Voltage drop for max. current: 75mV
• Dimensions: 120mm x 25mm

The Shunt Resistor is a special type of resistor with small resistance which allows large currents to pass through it. This is useful for measuring the current in a circuit: due to the Ohm’s law and voltage drop on the shunt resistor, we can know exactly which current passes through it. For example, for this resistor whose maximum current is 10A, the voltage drop at that current will be exactly 75mV (0.075V). Using a precise ADC, we can accurately measure the current of our consumer or power source.

• Max. current: 10A
• Voltage drop for max. current: 75mV
• Dimensions: 120mm x 25mm

Every real fan of electronics loves to have things that he knows will be needed in the future. The first and the most basic thing is a set of resistors, but immediately after, there are capacitors. The amount of times the whole project wouldn’t work just cause of one capacitor is too high! This set comes with a total of 120 electrolytic capacitors, with different voltages and capacities.

Panel pushbuttons may look ordinary but may look good as well, as this metal pushbutton with backlight. This pushbutton is waterproof, shock-proof and vandal-proof. Also comes with a backlight in a variety of colors.

Panel pushbuttons may look ordinary but may look good as well, as this metal pushbutton with backlight. This pushbutton is waterproof, shock-proof and vandal-proof. Also comes with a backlight in a variety of colors.

Panel pushbuttons may look ordinary but may look good as well, as this metal pushbutton with backlight. This pushbutton is waterproof, shock-proof and vandal-proof. Also comes with a backlight in a variety of colors.

Panel pushbuttons may look ordinary but may look good as well, as this metal pushbutton with backlight. This pushbutton is waterproof, shock-proof and vandal-proof. Also comes with a backlight in a variety of colors.

The active GPS antenna allows you to get a better GPS signal reception to your device. The antenna comes with a 3m cable at the end of which is the classic SMA male connector. There is a magnet for easier installation at the bottom of the antenna.

• Connector: SMA male
• Frequency: 1575.42MHz
• Voltage: 3V-5V
• Current: 10mA max.
• Polarization: circular(RH)
• Amplification: 28dB
• Dimensions: 45mm x 39mm x 13mm

Infra-red (IR) diode emits light in the spectrum that the human eye can’t see. However, such a diode has its purpose. It is used in remote controllers that send information on wavelengths within the infrared spectrum, e.g. to change television programme. So all you need to create your own remote is one of these diodes and correct data which will be sent!

easyC is a system developed by Soldered to establish easy connections between different I2C devices: microcontrollers, sensors, actuators. Connecting is easy and fast with pre-assembled cables. This connector is located on every easyC-compatible product.

SPDT (single-pole, dual-throw) is a simple sliding switch that connects the central contact with one of the other two contacts in its housing.

GSM SMA Connector antenna with standard SMA male connector for connecting to your GSM PCBs.

• Amplification: 3dBi
• Frequency range: 900 – 1800 MHz
• Length: 50mm
• Vertical polarization

JST (more precisely JST XH) connectors are today the most common connectors for rechargeable lithium batteries but are also used for many other applications where a fast, easy and convenient connection is required.

• Exact name: JST XH 2pin
• Mounting method: cable
• The distance between pins: 2.00mm
• Female connector

JST (more precisely JST XH) connectors are today the most common connectors for rechargeable lithium batteries but are also used for many other applications where a fast, easy and convenient connection is required.

JST (more precisely JST XH) connectors are today the most common connectors for rechargeable lithium batteries but are also used for many other applications where a fast, easy and convenient connection is required.