Filter
Second filter
Third filter
Fourth filter

Components

In this category there are various electronic components that we offer. Resistors, capacitors, transistors, connectors, etc.

Showing 193–216 of 248 results

Sort by:
10 segment LED indicator, monochrome
10 segment LED indicator, monochrome

10 segment LED indicator derivates from classical 7-segment LED display and it enables staggered display. It can be used for various purposes, such as battery level indicator. It has 10 bars in total which which glow in red color.

 

LED color: red
• Voltage: 3.3V
Dimensions: 25.4 x 10.1 x 7.9 mm

LoRa 868MHz antenna 79mm
LoRa 868MHz antenna 79mm

This antenna is designed for LoRa modules based on 868MHz frequency (Europe).

 

Frequency range: 868MHz (Europe)
Impedance: 50ohm
• Lenght: 79mm
• Connector type: SMA male

Emergency stop button
Emergency stop button

All real machines have an emergency stop button when pressed the whole machine stops. It can be very useful in case of the danger of someone working on that machine. If you want to install a similar thing on your project, here it is!

Type: DPST
Maximal voltage: 660V
Maximal current: 10A
Button diameter: 40mm
Mounting hole diameter: 22mm
• Dimensions: 60 x 70mm

micro:bit connector 40pin SMT
micro:bit connector 40pin SMT

SMD connector for BBC micro:bit board. 40 pins.

Male header 20x2
Male header 20x2

Classic male header with a pin spacing of 2.54mm (0.1″). The pin layout is 20 x 2.

Male angular header 40-pin
Male angular header 40-pin

Male header at 90 degrees angle and pin spacing 2.54mm (0.1 ‘). 40-pin.

 

Comes in a pack of 5 pieces.

N-type converter male-male
N-type converter male-male

This RF converter is used to connect coaxial cables. The converter has a male input on one side and a male output on the other.

Octal bus transciever SN74LVC245AN DIP-20
Octal bus transciever SN74LVC245AN DIP-20

These transceivers are designed to operate in the 1.65-V to 3.6-V DC range. LVC245A devices are designed for asynchronous communication between data buses.

Empty PCBs, 10 pcs
Empty PCBs, 10 pcs

They say that whoever works – makes mistakes. Well so do we! We have an old circuit board that we rest from unsuccessful projects or are simply a bug. There has excess PCBs of prototype products or serial products that are no longer manufactured. You will find everything, not necessarily functional 🙂

 

Use these chips to practice soldering on them, like a keychain or decoration for the wall. Give them to a friend. Make your next project on them. Let your imagination run wild 🙂

Note: Do not take these printed circuit boards as functional. We can not offer technical support for them. Some of them may have a number of brazed components.

Operational amplifier LM393 DIP-8
Operational amplifier LM393 DIP-8

The LM393 integrated circuit is a precision voltage comparator chip that features two independent comparators designed to operate from a single power supply. Its wide range of operating voltage and temperature makes it ideal for various applications, including automotive, industrial, and consumer electronics.

This compact chip is easy to integrate into your electronic projects and has low power consumption. It provides accurate and reliable performance, making it a popular choice among hobbyists, engineers, and students alike.

With the LM393, you can measure signal levels, detect the presence of an object, or control a motor with precision. Its technical specifications and reliable performance make it an excellent choice for your next electronic project.

Operational amplifier TL082 DIP-8
Operational amplifier TL082 DIP-8

An industry standard operational amp that provides outstanding value for cost sensitive applications.

Optocoupler SMD PC357N2J000F
Optocoupler SMD PC357N2J000F

PC357N2J000F is optocoupler in SMD format. For more details, check out the datasheet.

Resistor 0603 100kohm 5%
Resistor 0603 100kohm 5%

0603 resistor 100k ohm with 5% tolerance.

Resistor 0603 1k ohm
Resistor 0603 1k ohm

Resistor 0603 1k ohm with precision of 5%.

Resistor 0603 330ohm 5%
Resistor 0603 330ohm 5%

0603 resistor 330 ohm with 5% tolerance.

Otpornik 0603 4,7k ohm
Otpornik 0603 4,7k ohm
10mm LED diode pack (13 pieces)
10mm LED diode pack (13 pieces)

10mm diffused LED diodes are great stuff to play with. They can used in various beginner projects.

Smart LED WS2812B Ring12
Smart LED WS2812B Ring12

WS2812B is an extremely interesting LED that can emit light in red, green or blue – or any combination of these three colors, able to show a total of approximately 16 million different colors. On this board diodes are arranged in a circle. They are controlled by a single pin with only few lines of code from Arduino IDE. That’s possible thanks to the integrated controller inside the LED itself!

Smart LED WS2812B Ring24
Smart LED WS2812B Ring24

WS2812B is an extremely interesting LED that can emit light in red, green or blue – or any combination of these three colors, able to show a total of approximately 16 million different colors. On this board diodes are arranged in a circle. They are controlled by a single pin with only few lines of code from Arduino IDE. That’s possible thanks to the integrated controller inside the LED itself!

Pedal switch
Pedal switch

The pedal switch allows you to activate a hands-free device, which may be handy for equipment and machines that require both hands. The switch is push-button-like and creates a connection when the foot is held down by the pedal. On the back of the pedal is a rubber pad to prevent the pedal from sliding.

 

0603 SMD resistor set, 8500 pieces
0603 SMD resistor set, 8500 pieces

Are you repairing or developing electronic boards? This set of resistors is incredibly useful because you will never have to think again if you have that specific resistor. It consists of 170 different values each of which comes in an amount of 50 pieces. The resistors are manufactured by YAEGO, 1% tolerance and 0603.

 

Package: 0603
Tolerance: 1%
• 50 pcs of 170 values = 8500 pcs
Resistance values[ohm]:

0, 1, 10, 100, 1K, 10K, 100K, 1M, 10M
1.1, 11, 110, 1.1K, 11K, 110K, 1.1M
1.2, 12, 120, 1.2K, 12K, 120K, 1.2M
1.3. 13, 130, 1.3K, 13K, 130K, 1.3M
1.5, 15, 150, 1.5K, 15K, 150K, 1.5M
1.6, 16, 160, 1.6K, 16K, 160K, 1.6M
1.8, 18, 180, 1.8K, 18K, 180K, 1.8M
2, 20, 200, 2K, 20K, 200K, 2M
2.2, 22, 220, 2.2K, 22K, 220K, 2.2M
2.4, 24, 240, 2.4K, 24K, 240K, 2.4M
2.7, 27, 270, 2.7K, 27K, 270K, 2.7M
3, 30, 300, 3K, 30K, 300K, 3M
3.3, 33, 330, 3.3K, 33K, 330K, 3.3M
3.6, 36, 360, 3.6K, 36K, 360K, 3.6M
3.9, 39, 390, 3.9K, 39K, 390K, 3.9M
4.3, 43, 430, 4.3K, 43K, 430K, 4.3M
4.7, 47, 470, 4.7K, 47K, 470K, 4.7M
5.1, 51, 510, 5.1K, 51K, 510K, 5.1M
5.6, 56, 560, 5.6K, 56K, 560K, 5.6M
6.2, 62, 620, 6.2K, 62K, 620K, 6.2M
6.8, 68, 680, 6.8K, 68K, 680K, 6.8M
7.5, 75, 750, 7.5K, 75K, 750K, 7.5M
8.2, 82, 820, 8.2K, 82K, 820K, 8.2M
9.1, 91, 910,. 9.1K. 91K, 910K

 

Resetable SMD fuse 0.5A 1206
Resetable SMD fuse 0.5A 1206

A fuse that we use in our devices that are connected via the USB port on the computer. Automatically stops when the power flowing through it is greater than 500mA, and type is a quick blow. This is actually a silicon fuse, which, when interrupted, after a few minutes returns back to the state in which it conducts electricity – no need to change the fuse!

Rail to rail operational amplifier DIP-8 TLV2462
Rail to rail operational amplifier DIP-8 TLV2462

The TLV2462 is a low-power rail-to-rail input/output operational amplifier specifically designed for portable applications.

LoRa 868MHz antenna 200mm
LoRa 868MHz antenna 200mm

This antenna is designed for LoRa modules based on 868MHz frequency (Europe).

 

Frequency range: 868MHz (Europe)
Impedance: 50ohm
• Lenght: 200mm
• Connector type: SMA male

items per page