Dasduino kits

In this category you can find kits intended for beginners who are learning the basics of electronics and programming.

Showing all 4 results

Sort by:
Dasduino beginner kit REFILL
Dasduino beginner kit REFILL

If you usually do big projects or put on workshops, you know that there’s never enough of some components. Therefore, we’ve put together this set of wires, resistors and other primary components to make your everyday work or education much easier.


This set consists of:

  • Breadboard
  • Set of cables for breadboard
  • 50x 330ohm resistor
  • 45x 10k resistor
  • 10x 2n2222 transistor
  • 10x 1n4148 diode
  • 5x photoresistor
  • 10x pushbutton
  • 5x potentiometer 10k
  • 2x 100nF ceramic capacitor
  • 5mm RGB LED diode
  • 3x 5mm blue LED diode
  • 3x 5mm red LED diode
  • 3x 5mm yellow LED diode
  • 3x 5mm green LED diode
Dasduino Beginner Kit - Basic
Dasduino Beginner Kit - Basic

Dasduino set for beginners is a complete system for learning programming and basic electronic principles. Using this set You will be able to program the world and electronic devices around You and learn how to program Dasduino in C programming language, connect electronic components and basic things about them. No experience in programming or electronics is needed to work with this set. In the beginning, Croduino lessons help where through 20 mins videos basic concepts of programming and electronics are explained.


Because of the poor choice of microcontroller boards in Croatia, a great quantity of educational material linked to this kit and low prices, the kit is a great choice for classrooms, companies and even colleges. With the minimal price, it brings all that is needed to learn about electronics for the independent production of a project.


Kit consists of:

  • Dasduino CORE + USB cable
  • Breadboard cables
  • Breadboard
  • 15x 10k resistor
  • 25x 330ohm resistor
  • 2x 5mm RGB LED
  • 6x 5mm blue LED
  • 6x 5mm red LED
  • 6x 5mm yellow LED
  • 6x 5mm green LED
  • DHT11
  • 2x photoresistor
  • 3x Pushbutton
  • Buzzer
  • Mosfet IRF540
  • 3x 2N2222 transistor
  • Shift register 74HC595
  • 3x Potentiometer 10k
  • 3x 12mm pushbutton
Out of stock Dasduino beginner kit HOBBY
Dasduino beginner kit HOBBY

Dasduino Beginner Kit is a complete system for learning how to code and getting familiar with the main principles of electronics. With this set, you’ll be able to code the world and different electronic gadgets around you. Moreover, you’ll learn how to code your Dasduino (Arduino compatible board) in C programming language, connect electronic components and other things of importance in the electronics world. The best thing about this kit is that no experience in coding or electronics is required to get started.


This kit is an amazing choice for not only beginners, but schools, businesses, hobbyists and even colleges because it offers everything that is necessary for a individual to learn about electronics through their own project, while being at an affordable price.


Hobby version of Dasduino Beginner Kit has much more components than the basic version of the kit. It contains additional components and other actuators and sensors.


This kit consists of:

  • Dasduino CORE + USB cable
  • Set of cables for breadboard
  • Breadboard
  • 15x 10K resistor
  • 25x 330ohm resistor
  • 2x 5mm RGB LED diode
  • 6x 5mm blue LED diode
  • 6x 5mm red LED diode
  • 6x 5mm yellow LED diode
  • 6x 5mm green LED diode
  • DHT
  • 3x Photoresistor
  • 6x Pushbutton
  • Buzzer
  • 3x MOSFET transistor IRF540
  • 3x 2N2222 transistor
  • Shift register 74HC595
  • 6x Potentiometer 10k
  • 3x Big pushbutton
  • Relay, 1-channel
  • LCD display 16×2
  • 3x 1N4148 diode
  • Ultrasonic distance sensor
  • Motion sensor HC-SR501


Out of stock Dasduino Beginner Kit INTERNET OF THINGS - IoT
Dasduino Beginner Kit INTERNET OF THINGS - IoT

Croduino set for beginners Internet of Things (IoT CSP) is a complete set to start working with the Internet of things. Contains Dasduino CONNECT, microcontroller board with ESP8266 which can easily be programmed from the Arduino IDE. Connection to a PC is made directly using a USB cable. Besides the controller, the set has a bunch of different sensors and actuators, which are often used in projects related to the Internet.


Some of the projects that you can make using components from this set are: Weather page (using BMP180 sensor temperature and humidity, air quality sensor MQ135, LDR), the switch which is connected to the Internet (using 2-channel module with relay, MOSFET or servo motor) notification via the Internet (a motion sensor, photoresistor or other sensor), and so on. Turn on your imagination and make something else!


Kit consists of:

  • Dasduino CONNECT
  • 2-channel relay
  • DC motor
  • F-F cable set
  • Pressure & Temperature sensor BMP180
  • Servo motor – TowerPro SG90
  • PIR Movement sensor board
  • Air quality sensor MQ135 breakout
  • 10k resistors (15pcs)
  • 2x 2N2222 transistor
  • Photoresistor
  • 2x IRF540 MOSFET
  • DHT11 temperature & humidity sensor
  • Buzzer
items per page