Batteries & Power supplies

Lithium batteries can’t be charged as regular batteries or devices. Instead, you’ll need a li-ion charger such as this one. Integrated with the CC/CV charging technology, it is the simplest way to charge a lithium-ion battery.

The board has a USB Type-C connector for power, a JST-type connector for batteries, the charging circuit, and two status LEDs.

Product usage tips:

The red LED glowing means the battery is charging. The green LED glowing means battery is charged. Easy embedding into a project with the four mounting holes on the board. Comes with 5 pins that need to be soldered.

Note: This charger has no protection against reverse polarity, short-circuit, too high or too low voltage. If you’re looking for a charger with a protector, click here.

A classic small power with an output of 5V / 2A which will ideally supply your project with an Arduino / Croduino. The output is standard female USB connector (type A). You can directly connect a cable from the PCB to the charger and use it as a constant power source, or it can be used for charging up a mobile phone/tablet. Or for a third purpose ..? In any case, it will be enough!

Lithium batteries are charged differently than regular batteries and devices. You’ll need a li-ion charger like this one to charge them. Integrated with the CC/CV charging technology, it is the simplest way to charge a lithium-ion battery.

The board has a USB Type-C connector for power, a JST-type connector for batteries, the charging circuit, a protector, and two status LEDs. Comes with 7 pins that need to be soldered.

Product usage tips:

The red LED glowing means the battery is charging. The green LED glowing means it finished charging. Easy embedding into a project with the four mounting holes on the board.

Note: This charger has protection against short-circuit, too high, or too low voltage. It has no protection against reverse polarity.

Introducing our new MPPT Li-Ion charger, your all-in-one solution for efficient and reliable battery charging using solar energy! Whether you’re a hobbyist tinkering with electronics or a professional in need of a compact charging solution, this board will make things easier.

On board is the CN3791 which provides sophisticated charging algorithms tailored to Li-Ion batteries, ensuring precise control over the charging process for maximum efficiency and safety. Next to it, there are quick terminals with springs on the board for an even simpler and faster connection of the solar panel and battery. There is also a JST connector for connecting all li-ion batteries from our offer.

High-quality power supply with 5V, 2.4A output. It will power up any type of USB device. There is a standard USB female connector (type-a) at the output.

This lithium-ion battery is small, light and durable. Through standard JST 2mm female connector, it will yield 3.7V which will supply your projects for a whole day (and night!). Furthermore, the battery has an implemented protection system, which prevents high voltages ( prevents over-charging), undervoltage and short circuit. That way it protects the battery, increases its lifetime and protects you from possible accidents!

DISCLAIMER: This battery has to be charged with a special charged that uses CC/CV principle. Li-ion batteries are dangerous! Read our tutorial (link in the top right corner) before use.

This lithium-ion battery is small, light and durable. Through standard JST 2mm female connector, it will yield 3.7V which will supply your projects for a whole day (and night!). Furthermore, the battery has an implemented protection system, which prevents high voltages ( prevents over-charging), undervoltage and short circuit. That way it protects the battery, increases its lifetime and protects you from possible accidents!

DISCLAIMER: This battery has to be charged with a special charged that uses CC/CV principle. Li-ion batteries are dangerous! Read our tutorial (link in the top right corner) before use.

This lithium-ion battery is small, light and durable. Through standard JST 2mm female connector, it will yield 3.7V which will supply your projects for a whole day (and night!). Furthermore, the battery has an implemented protection system, which prevents high voltages ( prevents over-charging), undervoltage and short circuit. That way it protects the battery, increases its lifetime and protects you from possible accidents!

DISCLAIMER: This battery has to be charged with a special charged that uses CC/CV principle. Li-ion batteries are dangerous! Read our tutorial (link in the top right corner) before use.

This lithium-ion battery is small, light and durable. Through standard JST 2mm female connector, it will yield 3.7V which will supply your projects with power for a whole day (and night!). Furthermore, the battery has an implemented protection system, which prevents high voltages ( prevents over-charging), undervoltage and short circuit. That way it protects the battery, increases its lifetime and protects you from possible accidents!

DISCLAIMER: This battery has to be charged with a special charger that uses CC/CV principle. Li-ion batteries are dangerous! Read our tutorial (link in the top right corner) before use.

This Li-ion battery is small, light and durable! Trough standard JST 2mm female connector it will give you normal 3.7V that will power your projects whole day (and night). With all this battery has a built-in system for protection from too high voltage (prevents overcharging), too low voltage and short circuit. That’s how it protects the battery and secures its longer work and protects you from the danger of this battery!

Warning: This battery must be charged with special charger principle CC/CV – like the charger recommended under. Li-ion batteries are dangerous! Read our tutorial (link right above) before use.

Small, industrial power supply in the metal housing allows the conversion of 230V AC to 12V DC voltage of maximum current 5A, power 60W.

A classic small power supply with an output of 5V / 2A which will ideally supply any USB-powered device. The output is standard female USB connector (type A).

Adjustable power supply provides selected voltage at its output connector, adjustable via switch. 6 different connectors (jacks) also come with it, so it should fit with almost any device.

If you need a simple and stable power source for your breadboard projects, this board is here to help. Supply it with DC jack DC power or using UCB-C cable, and the board provides 3.3V, 5V or 12V directly to the power supply lines on the breadboard. Output voltages are adjustable seperately using the onboard switches. There’s a power LED, a power switch and an automatic voltage selection circuit, in case both power inputs are there.

A battery protector is, simply put, a device that makes sure that something bad doesn’t happen to the battery. This small circuit board protects your lithium battery (of any capacity) from overcharge, overdischarge, overcurrent and short circuit. It has a JST connector for connecting the battery, and the battery can be directly soldered.

• Protects from: undervoltage, overvoltage, overcurrent, short-circuit current

• Protection IC: DW01

• Battery configuration: 1S1P (1-serial, 1-parallel)
• Battery type: Li-ion, Li-poly
• Dimensions: 22 x 22mm

The BQ24295 is a versatile Li-ion battery charger designed to provide efficient and reliable charging for single-cell lithium-ion or lithium-polymer batteries. It supports various charging modes, including constant current (CC) and constant voltage (CV) charging, to ensure the battery is charged quickly and safely.

The BQ24295 charger operates on a wide input voltage range, typically from 4.35V to 17V, allowing it to be powered by a variety of power sources, including USB ports and AC adapters. It also features integrated power path management, which allows simultaneous charging of the battery while powering the connected device, providing uninterrupted operation.

Classic power adapter which converts other power connectors to EU schuko power connector

Small, industrial power supply in the metal housing allows the conversion of 230V AC to 12V DC voltage of maximum current 3A, power 36W.

Small, industrial power supply in the metal housing allows the conversion of 230V AC to 5V DC voltage of maximum current 4A, power 20W.

Small, industrial power supply in the metal housing allows the conversion of 230V AC to 24V DC voltage of maximum current 5A, power 120W.

Four AA battery holder made out of plastic with 4 mounting holes. It connects batteries in series.

• Battery size: AA
• Battery slots: 4

This Li-ion battery is small, light and durable! Through a standard JST 2mm female connector it will give you normal 3.7V that will power your projects whole day (and night). It also has a built-in system for protection from too high a voltage (prevents overcharging), too low a voltage and short circuit. That’s how it protects the battery and ensure a long lasting and safe environment for your projects!

Warning: This battery must be charged with special charger principle CC/CV – like the charger recommended under. Li-ion batteries are dangerous! Read our tutorial (link right above) before use.

This lithium-ion battery is small, light and durable. Through standard JST 2mm female connector, it will yield 3.7V which will supply your projects for a whole day (and night!). Furthermore, the battery has an implemented protection system, which prevents high voltages ( prevents over-charging), undervoltage and short circuit. That way it protects the battery, increases its lifetime and protects you from possible accidents!

• Nominal voltage: 3.7V
• Capacity: 6000mAh, 22.2Wh
• Dimensions: 90.2 x 60 x 9mm
• Standard JST-PH-2mm connector

DISCLAIMER: This battery has to be charged with a special charged that uses CC/CV principle. Li-ion batteries are dangerous! Read our tutorial (link in the top right corner) before use.

This 5000mah lithium-ion battery is small, light and durable. Through standard JST 2mm female connector, it will yield 3.7V which will supply your projects for a whole day (and night!). Furthermore, the battery has an implemented protection system, which prevents high voltages ( prevents over-charging), undervoltage and short circuit. That way it protects the battery, increases its lifetime and protects you from possible accidents!

• Nominal voltage: 3.7V
• Capacity: 5000mAh, 18.5Wh
• Dimensions: 67.4 x 54.6 x 10.1mm
• Standard JST-PH-2mm connector

DISCLAIMER: This battery has to be charged with a special charged that uses CC/CV principle. Li-ion batteries are dangerous! Read our tutorial (link in the top right corner) before use.