Power supplies

A small power supply that provides 3A on 5V via micro-USB cable. You might recognize, this is a perfect power supply for the Raspberry Pi. It would also find its place in some other uses, such as powering up a micro-USB device or charging a device with a battery.

A classic small power supply with an output of 5V, 3A that will ideally power your project in which you use an Arduino / Dasduino or any other device. It has a standard female USB-C connector on the output. You can connect the cable from the board directly to this charger and use it as a constant power source. Furthermore, you can use it to charge your cell phone / tablet. Or for a third purpose …? Either way, it will serve you well!

High-quality power supply with 5V, 2.4A output. It will power up any type of USB device. There is a standard USB female connector (type-a) at the output.

If you need a simple and stable power source for your breadboard projects, this board is here to help. Supply it with DC jack DC power or using UCB-C cable, and the board provides 3.3V, 5V or 12V directly to the power supply lines on the breadboard. Output voltages are adjustable seperately using the onboard switches. There’s a power LED, a power switch and an automatic voltage selection circuit, in case both power inputs are there.

This small AC-DC power supply is a simple solution to supply Dasduino or other small devices that run on 5V. It is simple, give it an AC voltage of 230V from the socket, and it outputs 5V with a maximum of 700mA, which is 3.5W. Furthermore, the power plug itself is really small and will fit in any case.

Small, industrial power supply in the metal housing allows the conversion of 230V AC to 5V DC voltage of maximum current 4A, power 20W.

Small, industrial power supply inside the iron enclosure enables 230V AC conversion into a 5V DC with 6A maximum current (30W).

The small industrial power supply in the iron case allows conversion from 230V AC to 5V DC voltage maximum current of 10A or power of 50W

A classic small power with an output of 5V / 2A which will ideally supply your project with an Arduino / Croduino. The output is standard female USB connector (type A). You can directly connect a cable from the PCB to the charger and use it as a constant power source, or it can be used for charging up a mobile phone/tablet. Or for a third purpose ..? In any case, it will be enough!

Small, industrial power supply in the metal housing allows the conversion of 230V AC to 12V DC voltage of maximum current 3A, power 36W.

This AC-DC power supply is a simple solution to power your 12V or 5V devices. it is especially practicle for projects where you need both standard voltages. Simply give it AC voltage of 230V from the electrical outlet and it gives you 5V with max 1A and 12V with max 1A.

WARNING: with this module you will work with high voltages! Apply all safety measures, be sure to turn off the power before connecting, and then isolate the high voltage part.

Small, industrial power supply in the metal housing allows the conversion of 230V AC to 12V DC voltage of maximum current 5A, power 60W.

The small power supply in a plastic case allows conversion from 230V AC to 12V DC voltage maximum current of 2A or power of 24W

The small industrial power supply in the iron case allows conversion from 230V AC to 12V DC voltage maximum current of 10A or power of 120W

A classic small power supply with an output of 5V / 2A which will ideally supply any USB-powered device. The output is standard female USB connector (type A).

Small, industrial power supply in the metal housing allows the conversion of 230V AC to 24V DC voltage of maximum current 1A, power 24W.

Adjustable power supply provides selected voltage at its output connector, adjustable via switch. 6 different connectors (jacks) also come with it, so it should fit with almost any device.

Small, industrial power supply in the metal housing allows the conversion of 230V AC to 24V DC voltage of maximum current 5A, power 120W.