Filter
Second filter
Third filter
Fourth filter

Raspberry Pi & Micro:bit

In this category you can find Raspberry Pi microcomputers and Micro:bit boards with corresponding accessories. Raspberry PI 4, Micro:bit etc.

Showing 1–24 of 26 results

Sort by:
10x cables with aligator clips
10x cables with aligator clips

This set of cables makes component conjugation when prototyping or testing much faster and easier. Set consists of 10 cables that have alligator connection on each end so you could hook it to any component easily. Moreover, your work will be even simpler because of different cable colors in the set.

 

Raspberry Pi easyC adapter
Raspberry Pi easyC adapter

This adapter makes it easy to connect easyC devices and sensors to the Raspberry Pi. It has 3 pieces of easyC connectors and a female header for Raspberry Pi, next to the header there are pins for connecting 5V and 3.3V and ground pins. It simply connects to the Raspberry Pi because its pinout matches the pinout of the Raspberry Pi.

Raspberry Pi 4 B 2GB
Raspberry Pi 4 B 2GB

A new and more powerful Raspberry Pi 4 is here! The most famous little computer in the world that doesn’t need any introduction. The 87 x 58mm board features a 64-bit 4-core processor clocked at 1.5GHz, 2GB of RAM, WiFi and Bluetooth, Gigabit Ethernet, 2x HDMI output, 4 USB ports, an SD card slot for system sotrage and your data. One should not forget the well-known Raspberry Pi GPIO, which allows you to connect various accessories directly to the Raspberry Pi.

 

Out of stock Raspberry Pi 4 B 4GB
Raspberry Pi 4 B 4GB

A new and more powerful Raspberry Pi 4 is here! The most famous little computer in the world that doesn’t need any introduction. The 87 x 58mm board features a 64-bit 4-core processor clocked at 1.5GHz, 4GB of RAM, WiFi and Bluetooth, Gigabit Ethernet, 2x HDMI output, 4 USB ports, an SD card slot for system sotrage and your data. One should not forget the well-known Raspberry Pi GPIO, which allows you to connect various accessories directly to the Raspberry Pi.

 

Power supply 5V 3A 15W with microUSB connector
Power supply 5V 3A 15W with microUSB connector

A small power supply that provides 3A on 5V via micro-USB cable. You might recognize, this is a perfect power supply for the Raspberry Pi. It would also find its place in some other uses, such as powering up a micro-USB device or charging a device with a battery.

 

Out of stock Power supply 5V 3A 15W with USB-C connector
Power supply 5V 3A 15W with USB-C connector

A classic small power supply with an output of 5V, 3A that will ideally power your project in which you use an Arduino / Dasduino or any other device. It has a standard female USB-C connector on the output. You can connect the cable from the board directly to this charger and use it as a constant power source. Furthermore, you can use it to charge your cell phone / tablet. Or for a third purpose …? Either way, it will serve you well!

Plastic Raspberry Pi 4 B+ case
Plastic Raspberry Pi 4 B+ case

This Raspberry Pi case is designed for the classic full-sized Raspberry Pi. With this case, your Raspberry Pi is safe from external sources and possible damage. It also provides easy access to all connections and GPIO pins.

microSD card 32GB
microSD card 32GB

It’s a good idea to pick up Raspberry Pi and a card for his operating system right from one place, so we started to offer microSD cards.

• microSD card
Capacity: 32GB

Raspberry Pi easyC adapter
Raspberry Pi easyC adapter

This adapter makes it easy to connect easyC devices and sensors to the Raspberry Pi. It has 2 soldered easyC male connectors and a female header for Raspberry Pi, next to the header there are pins for connecting 5V and 3.3V and ground pins. It simply connects to the Raspberry Pi because its pinout matches the pinout of the Raspberry Pi.

Raspberry Pi breadboard breakout + cable
Raspberry Pi breadboard breakout + cable

With the Raspberry Pi breadboard breakout board, you can easily connect your Raspberry Pi with a regular breadboard. It fits on standard half-size and full-size breadboards. It even adds a couple of ground and power supply pins. Best of all, the pins are already soldered. You just have to plug the cable in. This breakout will get you prototyping on the Raspberry Pi in no time!

 

Product usage tips:

The breakout board is compatible with Raspberry Pi that comes with 40-pin connector. It comes with a HAT ribbon cable for the Raspberry Pi. It has an easyC port for easier connection with other I2C breakout boards.

 

If the breakout board is not working properly, it’s likely not connected correctly. Check the pinout and the wiring. The culprit might be there. If that’s not the case, check if the HAT ribbon cable is connected as it should be. It should be straight and go to the bottom of the pins.

BBC Micro:bit board v2
BBC Micro:bit board v2

BBC Micro:bit is well known in Croatia due to Croatian Makers project. Soldered is on its way to become the official distributor for Micro:bit in Croatia.

For those who are not familiar, micro:bit is small microcontroller board accompanied with bunch of sensors which makes learning programming logic easier, especially for kids. There are more than a few visual programming tools for this board which make programming really simple. It is programmed via USB port and besides sensors, it has 2 pushbuttons and 5×5 LED matrix display onboard.

WiFi:bit
WiFi:bit

Micro:bit is a very interesting board with lots of options that are used by many children in school or hobbyists, but who can say no to new features! So we decided to make a micro:bit add-on that will enable internet connection via WiFi! Finally, you’ll be able to connect your micro:bit projects to the Internet and to connect to the well known Internet of Things. WiFi:bit add-on is easy to use through a MakeBlock add-on or using completed Python examples.

Just insert micro:bit to the add-on, plug in the power cable (required) and you are ready! Open the examples and start sending and receiving data from the internet. There are even two easyC connectors on the WiFi add-on, which allow the simplest connection of I2C sensors and actuators with micro:bit. There are also available pins on the board which are isolated on standard spacing used for breadboard connections or connections with cables to additional components!

Protective case for Micro:bit
Protective case for Micro:bit

This silicone protective case fits BBC Micro:bit boards. The Micro:bit’s buttons are accessible through the holes in the case and the illumination provided by the LED matrix is ​​visible.

The case has holes that allow access to JST and USB connectors and reset keys.

  • Dimensions: 60 mm x 50 mm x 6 mm
Proto:bit
Proto:bit

Proto:bit allows you to access all micro:bit pins. Connect it to breadboard or use cables to connect additional components to it. Also comes with 2 easyC connectors that allow you to easily connect additional I2C sensors, breakouts and actuators.

Raspberry Pi GPIO cable
Raspberry Pi GPIO cable

The Raspberry Pi cable provides direct connectivity to the Raspberry GPIO port and then easily accesses all plug-ins or adapters.

2xAAA battery holder with JST connector
2xAAA battery holder with JST connector

Holder for two AAA batteries of small dimensions with a JST connector at the end that connects to a standard input for batteries. Often used with BBC micro:bit.

Micro HDMI to HDMI adapter
Micro HDMI to HDMI adapter

This adapter will turn your Micro HDMI into an HDMI connector. On one side there is a male Micro HDMI and on the opposite side is a female HDMI connector .

Micro HDMI to HDMI cable 1m
Micro HDMI to HDMI cable 1m

This adapter will convert your Micro HDMI to HDMI port. There is a male Micro HDMI on one side and a HDMI port on the other.

 

• Connector side A: micro HDMI
• Connector side B: HDMI
• Cable length: 1m

HDMI cable 0.3m
HDMI cable 0.3m

HDMI cable we offer because it is needed for connection on Raspberry Pi with the outer monitor. This is classic male-male HDMI cable. This cable is extremely short almost 20cm and it will find an application on small LCD screens for Raspberry.

 

• Lenght: 0.3m

Mini HDMI to HDMI adapter
Mini HDMI to HDMI adapter

This adapter will turn your Mini HDMI into an HDMI connector. On one side there is a male Mini HDMI and on the opposite side is a female HDMI connector.

HDMI cable 1m
HDMI cable 1m

We all know what HDMI cable is and we offer it because it’s required to connect Raspberry Pi with an external monitor. This is a classic male-male HDMI cable.

Length: 1m

HDMI to VGA adapter
HDMI to VGA adapter

This adapter will turn your HDMI into an VGA connector. On one side there is a male HDMI and on the opposite side is a female VGA connector.

micro:bit connector 40pin SMT
micro:bit connector 40pin SMT

SMD connector for BBC micro:bit board. 40 pins.

MicroUSB to USB-C adapter
MicroUSB to USB-C adapter

This adapter can switches your MicroUSB cabel into an USB-C.

 

Front: MicroUSB
• Back: USB-C

items per page