In this category you can find accessories such as adapters, cables, modules, peripherals. For example microSD memory cards, etc.
Showing all 16 results
This adapter makes it easy to connect easyC devices and sensors to the Raspberry Pi. It has 3 pieces of easyC connectors and a female header for Raspberry Pi, next to the header there are pins for connecting 5V and 3.3V and ground pins. It simply connects to the Raspberry Pi because its pinout matches the pinout of the Raspberry Pi.
It’s a good idea to be able to pick up Raspberry Pi and a card for its operating system right from one place, so we decided to include microSD cards in our store.
It’s a good idea to pick up Raspberry Pi and a card for his operating system right from one place, so we started to offer microSD cards.
• microSD card
• Capacity: 32GB
This adapter makes it easy to connect easyC devices and sensors to the Raspberry Pi. It has 2 soldered easyC male connectors and a female header for Raspberry Pi, next to the header there are pins for connecting 5V and 3.3V and ground pins. It simply connects to the Raspberry Pi because its pinout matches the pinout of the Raspberry Pi.
With the Raspberry Pi breadboard breakout board, you can easily connect your Raspberry Pi with a regular breadboard. It fits on standard half-size and full-size breadboards. It even adds a couple of ground and power supply pins. Best of all, the pins are already soldered. You just have to plug the cable in. This breakout will get you prototyping on the Raspberry Pi in no time!
Product usage tips:
The breakout board is compatible with Raspberry Pi that comes with 40-pin connector. It comes with a HAT ribbon cable for the Raspberry Pi. It has an easyC port for easier connection with other I2C breakout boards.
If the breakout board is not working properly, it’s likely not connected correctly. Check the pinout and the wiring. The culprit might be there. If that’s not the case, check if the HAT ribbon cable is connected as it should be. It should be straight and go to the bottom of the pins.
The Raspberry Pi cable provides direct connectivity to the Raspberry GPIO port and then easily accesses all plug-ins or adapters.
This adapter will turn your Micro HDMI into an HDMI connector. On one side there is a male Micro HDMI and on the opposite side is a female HDMI connector .
This adapter will convert your Micro HDMI to HDMI port. There is a male Micro HDMI on one side and a HDMI port on the other.
• Connector side A: micro HDMI
• Connector side B: HDMI
• Cable length: 1m
HDMI cable we offer because it is needed for connection on Raspberry Pi with the outer monitor. This is classic male-male HDMI cable. This cable is extremely short almost 20cm and it will find an application on small LCD screens for Raspberry.
• Lenght: 0.3m
This adapter will turn your Mini HDMI into an HDMI connector. On one side there is a male Mini HDMI and on the opposite side is a female HDMI connector.
We all know what HDMI cable is and we offer it because it’s required to connect Raspberry Pi with an external monitor. This is a classic male-male HDMI cable.
This adapter will turn your HDMI into an VGA connector. On one side there is a male HDMI and on the opposite side is a female VGA connector.
This adapter can switches your MicroUSB cabel into an USB-C.
• Front: MicroUSB
• Back: USB-C
This This USB SD adaptor allows you to read and write on varios types of SD cards: Micro MS, SD, MIcroSD, MS Duo.
• Card models: Micro MS(M2), SD/MMC/SDHC/DV, MS Duo/MS PRO Duo, Micro SD/T – Flash
• Dimensions: 69 x 20.5 x 16mm
If you need to get a classic USB from a modern USB-C this adapter will help you with that. On one side there is a male USB-C and on the opposite side there is a classic female USB 2.0 type A connector.
If your device lacks WiFi, connect this device to USB and the problem is solder! WiFi USB adapter works on all major operating systems. It comes with an external SMA antenna that you can also unplug and connect a stronger antenna if required.