In this category, you can find all products from the offer that are on sale.
To claim an additional 30% discount, enter “SALE30” in the coupon field on the shopping cart page.
Showing 49–72 of 192 results
Classic SMD LED size 0402.
With the USB host shield, you can use external USB devices (such as a USB keyboard) with a microcontroller.
Classic power adapter which converts other power connectors to EU schuko power connector
A loadcell is a small device that is able to weigh the load that is on it. Depending on the load, it provides very small output voltages that needs to be amplified (e.g. using an op-amp or an ADC with a built-in op-amp) in order to be able to do useful things with it. It has two fixed and two variable resistors connected to the Wheatstone bridge.
It needs to be connected to the HX711 board so you can read the readings with the Croduino. For more details, see How to Use the Module Tutorial in the upper right corner.
A load cell is a small device that is able to weigh the load that is on it. Depending on the load, it provides very small output voltages that need to be amplified (e.g. using an op-amp or an ADC with a built-in op-amp) in order to be able to do useful things with it. It has two fixed and two variable resistors connected to the Wheatstone bridge.
It needs to be connected to the HX711 board so you can read the readings with the Dasduino. For more details, see How to Use the Module Tutorial in the upper right corner.
A loadcell is a small device that is able to weigh the load that is on it. Depending on the load, it provides very small output voltages that needs to be amplified (e.g. using an op-amp or an ADC with a built-in op-amp) in order to be able to do useful things with it. It has two fixed and two variable resistors connected to the Wheatstone bridge.
It needs to be connected to the HX711 board so you can read the readings with the Croduino. For more details, see How to Use the Module Tutorial in the upper right corner.
Power connector with fuse
Soldering station with hot air is a combination that will solve all the problems regarding soldering and desoldering, whether it is THT or SMD components. The 50W soldering station has enough power to solder the components with the highest thermal mass, and comes with a pointed tip. Hot air will be useful for soldering and desoldering SMD components. It comes with three extensions with which it is possible to select the width of the hot air flow. With the station also comes a stand for both the soldering iron and for hot air.
• Maximum hot air power: 450W
• Hot air temperature range: 100℃ – 500℃
• Hot air flow: 120L/min max.
• Maximum power of soldering iron: 50W
• Hot air temperature range: 200℃ – 500℃
• Manufacturer and model: Gordak 968
• Input voltage: 230V
This adapter will convert your Micro HDMI to HDMI port. There is a male Micro HDMI on one side and a HDMI port on the other.
• Connector side A: micro HDMI
• Connector side B: HDMI
• Cable length: 1m
We all know these little DC motors, especially if you’ve ever disassembled any toy. They are everywhere, and now at the Soldered.com.
Small, industrial power supply in the metal housing allows the conversion of 230V AC to 24V DC voltage of maximum current 1A, power 24W.
The water flow meter allows you to find out the amount of water that has passed through the sensor in units of liters per minute. It consists of a plastic valve, a water-rotating rotor and a hall effect sensor. When water passes through the rotor, it rotates at different speeds, which the hall effect sensor measures. This signal is read and converted to L / min.
• Voltage: 5-18VDC
• Measuring range: 1-30 L/min
• Maximum presure: 2.0MPa
• Maximum operating current: 15mA
• Tube diameter: 1/2”
Printed boards during soldering and various repairs very often remain dirty from flux and other impurities. To avoid gradual degradation of solder quality, oxidation, and potential short circuits, the tiles need to be cleaned. This spray will help significantly here, and the brush that comes with the spray will further help remove dirt mechanically.
• Package: 400mL
Graphite-based lubricant contains carefully added additives that extend shelf life and load resistance. It is also water resistant.
• Package: 100mL
• Temperature range for use: -20 – 50°C
Ceramic-based lubricant is often used for mechanical parts that is under constant heavy load. It has an extremely large temperature range,which is why it can also be used in owen. It does not contain metals or silicone, and is resistant to chemicals, water and all weather conditions.
• Package: 100mL
• Temperature range: -50 – 1200°C
Vaseline oil is used to lubricate mechanical parts and precision mechanisms in all industries. It leaves no traces, has no odor or color and does not adversely affect plastics.
• Package: 100mL
Isopropyl alcohol is a high purity alcohol that can often be found in every workshop. It is useful for cleaning printed circuit boards because it evaporates quickly and removes grease deposits (such as flux or paste traces) and other impurities. It is also used with 3D printers to clean the print surface and for all other applications where purity is required. It is important to note that it is antibacterial.
• Packaging: 5L
• Purity: 96%
Isopropyl alcohol is a high purity alcohol that can often be found in every workshop. It is useful for cleaning printed circuit boards because it evaporates quickly and removes grease deposits (such as flux or paste traces) and other impurities. It is also used with 3D printers to clean the print surface and for all other applications where purity is required. It is important to note that it is antibacterial.
• Packaging: 300mL
• Dispersion: syringe
• Purity: 96%
Isopropyl alcohol is a high purity alcohol that can often be found in every workshop. It is useful for cleaning printed circuit boards because it evaporates quickly, and allows the removal of fatty deposits (such as traces of flux and paste) and dirt. It is also used with 3D printers to clean the print substrate and for all other applications where cleanliness is sought. It is important to note that it has antibacterial action.
• Package: 250mL
• Dispersion:spray
• Purity: 96%
Flux is used during soldering to clean the board from dirt and possible oxidation (if any) which results in quality solder joints – solder is much easier to catch in the solder spot. In addition to cleaning, it also provides better wetting properties, which means that the solder will adhere better and more properly to the legs of components or solder joints. All this makes soldering much easier. In addition to all the above, this flux contains activators that further improve soldering, to the point that soldering is as simple and high quality as with solder paste.
• Weight: 40g
REMARK: Be sure to close the flux after use.
These wipes are intended for cleaning consumer electronics that are used every day: monitors, mouse, keyboard, laptop, all types of laboratory equipment such as a multimeter, oscilloscope, power supply, etc..
• Quantity: 24
Thermally conductive paste is used at the points of contact of two metals where thermal conductivity is required. It is most often some type of heatsink, either for the processor or any other type of electronic component. The base of this thermally conductive paste is silicone, and gold dust is added to it in a percentage of as much as 45%, which achieves maximum thermal conductivity – as much as 3 times higher than ordinary paste. Comes with a plastic mounting spatula.
• Mass: 1g
• Thermal conductivity: >2.8W/mK
Thermally conductive paste is used at the points of contact of two metals where thermal conductivity is required. It is most often some type of heatsink, either for the processor or any other type of electronic component. The base of this thermally conductive paste is silicone, and steel dust is added to it, which achieves thermal conductivity.
• Mass: 1g
• Thermal conductivityt: >6W/mK
Thermally conductive paste is used at the points of contact of two metals where thermal conductivity is required. It is most often some type of heatsink, either for the processor or any other type of electronic component. The base of this thermally conductive paste is silicone, and diamond dust is added to it in a percentage of 10% to increase the thermal conductivity. Comes with a special application brush.
• Mass: 4g
• Thermal conductivityt: >4W/mK