Sale

In this category, you can find all products from the offer that are on sale.

Showing 73–96 of 200 results

Sort by:
Heat conductive paste, gold, 1g
Heat conductive paste, gold, 1g

Thermally conductive paste is used at the points of contact of two metals where thermal conductivity is required. It is most often some type of heatsink, either for the processor or any other type of electronic component. The base of this thermally conductive paste is silicone, and gold dust is added to it in a percentage of as much as 45%, which achieves maximum thermal conductivity – as much as 3 times higher than ordinary paste. Comes with a plastic mounting spatula.

 

Mass: 1g
Thermal conductivity: >2.8W/mK

Heat conductive paste 1g
Heat conductive paste 1g

Thermally conductive paste is used at the points of contact of two metals where thermal conductivity is required. It is most often some type of heatsink, either for the processor or any other type of electronic component. The base of this thermally conductive paste is silicone, and steel dust is added to it, which achieves thermal conductivity.

 

Mass: 1g
Thermal conductivityt: >6W/mK

Silicone heat conductive paste, diamond, 4g
Silicone heat conductive paste, diamond, 4g

Thermally conductive paste is used at the points of contact of two metals where thermal conductivity is required. It is most often some type of heatsink, either for the processor or any other type of electronic component. The base of this thermally conductive paste is silicone, and diamond dust is added to it in a percentage of 10% to increase the thermal conductivity. Comes with a special application brush.

 

Mass: 4g
Thermal conductivityt: >4W/mK

Protective case for Micro:bit
Protective case for Micro:bit

This silicone protective case fits BBC Micro:bit boards. The Micro:bit’s buttons are accessible through the holes in the case and the illumination provided by the LED matrix is ​​visible.

The case has holes that allow access to JST and USB connectors and reset keys.

  • Dimensions: 60 mm x 50 mm x 6 mm
Raspberry Pi Power over Ethernet (PoE) HAT
Raspberry Pi Power over Ethernet (PoE) HAT

Raspberry Pi PoE HAT:

The Raspberry Pi 3B+ can be powered with this HAT via an Ethernet cable using the PoE (Power over Ethernet) standard.

This HAT uses the PoE 802.3af standard which means that a maximum of 15W can be delivered to the Raspberry.

The HAT is compact, meaning it will fit in the official case for the Raspberry Pi 3B +. The PoE HAT also sports a fan for additional cooling.

Since the fan is controlled via I2C, all 40 GPIO pins can still be used.

The PoE extension is a good choice when you plan to use the Raspberry where it cannot be powered via a USB cable.

N-type converter male-male
N-type converter male-male

This RF converter is used to connect coaxial cables. The converter has a male input on one side and a male output on the other.

SMA female right angle connector BWSMA-KWE-Z001
SMA female right angle connector BWSMA-KWE-Z001

This connector allows the connection of an antenna with a male SMA connector to a board at a 90-degree angle.

US to EU power adapter
US to EU power adapter

Classic current adapter from switching the american to european type connector.

 

Dimensions: 25.5 x 30 x 14mm

SMA to N-type connector cable
SMA to N-type connector cable

This cabel switches your antenna with an SMA female connector to an N-type connector.

 

 Cable lenght: 1m

RAK7258 LoRa Gateway 868MHz
RAK7258 LoRa Gateway 868MHz

RAK7258 8-channel LoRa gateway with built-in Ethernet connectivity that connects to internet . It is designed t obe easy to use, so it takes only 15 minutes to connect to The Thing Network (TTN) via a graphical user interface. It also works with a private network server (ChirpStack), and it can function trough built-in LoRa server (up to 128 nodes). Its range is, with a quality antenna, up to 15km on a totaly open space without obstacles.

 

This version does not come with a 4G modem, so it can function with any location that has that signal, without the need for other WiFi or ethernet connection to internet.

 

Plastic Raspberry Pi 4 B+ case
Plastic Raspberry Pi 4 B+ case

This Raspberry Pi case is designed for the classic full-sized Raspberry Pi. With this case, your Raspberry Pi is safe from external sources and possible damage. It also provides easy access to all connections and GPIO pins.

Set 0603 SMD inductors, 1300 pieces
Set 0603 SMD inductors, 1300 pieces

Are you repairing or developing electronic boards? This set of inductors is incredibly useful because you will never have to think again if you have that specific inductor. It consists of 52 different values each of which comes in an amount of 50 pieces.

 

• Package: 0603
• 25 pcs of 52 values = 1300 pcs
• Values [H]:

1nH,    10nH,  100nH, 1uH,    10uH
1.2nH, 12nH,  120nH, 1.2uH, 12uH
1.5nH, 15nH,  150nH, 1.5uH, 15uH
1.8nH, 18nH,  180nH, 1.8uH, 22uH
2.2nH, 22nH,  220nH, 2.2uH,
2.7nH, 27nH,  270nH, 2.7uH,
3.3nH, 33nH,  330nH, 3.3uH,
3.9nH, 39nH,  390nH, 3.9uH,
4.7nH, 47nH,  470nH, 4.7uH,
5.6nH, 56nH,  560nH, 5.6uH,
6.8nH, 68nH,  680nH, 6.8uH,
8.2nH, 82nH,  820nH, 8.2uH,

Set 0603 SMD capacitors, 4500 pieces
Set 0603 SMD capacitors, 4500 pieces

Are you repairing or developing electronic boards? This set of capacitors is incredibly useful because you will never have to think again if you have that specific capacitor. It consists of 90 different values each of which comes in an amount of 50 pieces.

 

• Package: 0402
• 50 pcs of 90 values = 4500 pcs
• Capacity value [F]:

0.5pF,   3.3pF,  7pF,     20pF, 62pF,   200pF, 2.2nF, 100nF
0.75pF, 3.6pF,  7.5pF,  22pF, 68pF,   220pF, 3.3nF, 220nF
1pF,      3.9pF,  8pF,     24pF, 75pF,   270pF, 4.7nF, 470nF
1.2pF,   4pF,     8.2pF,  27pF, 82pF,   330pF, 6.8nF, 680nF
1.5pF,   4.3pF,  9.1pF,  30pF, 91pF,   390pF, 8.2nF, 1uF
1.8pF,   4.7pF,  10pF,   33pF, 100pF, 470pF, 10nF,  2.2uF
2pF,      5pF,     11pF,   36pF, 110pF,  560pF, 15nF,
2.2pF,   5.1pF,  12pF,   39pF, 120pF, 680pF,  22nF,
2.4pF,   5.6pF,  13pF,   43pF, 130pF, 820pF,  33nF,
2.5pF,   6pF,     15pF,   47pF, 150pF, 1nF,      47nF,
2.7pF,   6.2pF,  16pF,   51pF, 160pF, 1.2nF,   68nF,
3pF,      6.8pF,  18pF,   56pF, 180pF, 1.5nF,   82nF,

Set 0402 SMD capacitors, 4000 pieces
Set 0402 SMD capacitors, 4000 pieces

Are you repairing or developing electronic boards? This set of capacitors is incredibly useful because you will never have to think again if you have that specific capacitor. It consists of 80 different values each of which comes in an amount of 50 pieces.

 

• Package: 0402
• 50 pcs of 80 values= 4000 pcs
• Capacity values [F]:

0.5pF,   2.7pF,  7.5pF, 24pF, 82pF,   1nF,    68nF
0.75pF, 3pF,     8pF,    27pF, 100pF, 1.5nF, 82nF
1pF,      3.3pF,  8.2pF, 30pF, 110pF, 2.2nF, 100nF
1.2pF,   3.6pF,  9pF,    33pF, 120pF, 3.3nF, 220nF
1.3pF,   3.9pF, 10pF,   36pF, 150pF, 4.7nF, 470nF
1.5pF,   4.3pF, 11pF,   39pF, 180pF, 6.8nF, 680nF
1.6pF,   4.7pF, 12pF,   43pF, 200pF, 8.2nF, 820nF
1.8pF,   5pF,    15pF,   47pF, 220pF, 10nF,  1uF
2pF,      6pF,    16pF,   51pF, 330pF, 15nF,
2.2pF,   6.2pF, 18pF,   56pF, 470pF, 22nF,
2.4pF,   6.8pF, 20pF,   62pF, 680pF, 33nF,
2.5pF,   7pF,    22pF,   68pF, 820pF, 47nF,

LoRa 868MHz antenna 110mm
LoRa 868MHz antenna 110mm

This antenna is designed for LoRa modules based on 868MHz frequency (Europe).

 

Frequency range: 868MHz (Europe)
Impedance: 50ohm
• Lenght: 110mm
• Connector type: SMA male

LoRa antenna SDBF0.5-868 868MHz
LoRa antenna SDBF0.5-868 868MHz

This LoRa antenna is specially designed for use with the LoRa protocol. Through detailed testing, we have determined that it achieves maximum range in open spaces and we recommend it for use with external gateways.

 

Mounting type: pole, comes with a holder
• Connector: N-type
• Gain: 6.5dBi
• Frequency: 868MHz (Europe)
Impedance: 50 ohm
• Dimensions: 55 x 2.6 cm

MicroUSB to USB-C adapter
MicroUSB to USB-C adapter

This adapter can switches your MicroUSB cabel into an USB-C.

 

Front: MicroUSB
• Back: USB-C

USB SD card reader
USB SD card reader

This This USB SD adaptor allows you to read and write on varios types of SD cards: Micro MS, SD, MIcroSD, MS Duo.

 

Card models: Micro MS(M2), SD/MMC/SDHC/DV, MS Duo/MS PRO Duo, Micro SD/T – Flash
• Dimensions: 69 x 20.5 x 16mm

Raspberry Pi easyC adapter
Raspberry Pi easyC adapter

This adapter makes it easy to connect easyC devices and sensors to the Raspberry Pi. It has 2 soldered easyC male connectors and a female header for Raspberry Pi, next to the header there are pins for connecting 5V and 3.3V and ground pins. It simply connects to the Raspberry Pi because its pinout matches the pinout of the Raspberry Pi.

Out of stock LIN breakout NCV7329 - SLAVE
LIN breakout NCV7329 - SLAVE

LIN (Local Interconnect Network) is a series network protocol used for communication between components in vehicles. LIN-bus is a supplement to CAN-bus, and difference is that LIN offers lower performance and reliability but it also has drastically lower costs. Operative voltage of 12V.

 

This breakout has SLAVE protocol on it. Master/Slave is a model of asymetric communication where one device (Master) controls one or more devices or processes (Slave) that follows all commands from Master. One Master can control up to 16 devices.

 

 Voltage: 12V
 Dimensions: 21.3 x 22.6 x 12.3mm

Micro HDMI to HDMI adapter
Micro HDMI to HDMI adapter

This adapter will turn your Micro HDMI into an HDMI connector. On one side there is a male Micro HDMI and on the opposite side is a female HDMI connector .

Mini HDMI to HDMI adapter
Mini HDMI to HDMI adapter

This adapter will turn your Mini HDMI into an HDMI connector. On one side there is a male Mini HDMI and on the opposite side is a female HDMI connector.

Dust sensor PPD42NS PM2.5
Dust sensor PPD42NS PM2.5

PPD42NS is a photoelectric sensor that detects the concentration of dust in the air and thus shows the quality of the air, using light reflection. The PM (eng. Particulate Matter) level in the air shows the amount of physical particles, and the label PM2.5 indicates particles smaller than 2.5um. This sensor provides data collectively, so it will be extremely useful in projects measuring the quality and purity of the air.

USB Blaster FPGA programmer
USB Blaster FPGA programmer

This device is used to connect you to your FPGA or CPLD manufactured by Cyclone or Altera by 10-pin FPGA cable

 

 Connectors: USB 2.0, FPGA 10-pin

 

Cables are included with the device.

items per page