Sale

In this category, you can find all products from the offer that are on sale.

Showing 121–144 of 200 results

Sort by:
IR remote controller
IR remote controller

Universal IR (infrared) remote with 6 keys: ignition key, four direction keys, and center button. Although it is intended for something else, you will easily pair this IR remotely with an IR receiver in the Croduino / Arduino project and thus make it respond to your commands.

 

Number of buttons: 21
Battery: CR2025, comes with the remote
Dimensions: 86 x 40 x 6.5mm

Pedal switch
Pedal switch

The pedal switch allows you to activate a hands-free device, which may be handy for equipment and machines that require both hands. The switch is push-button-like and creates a connection when the foot is held down by the pedal. On the back of the pedal is a rubber pad to prevent the pedal from sliding.

 

Power supply 12V 10A 120W
Power supply 12V 10A 120W

The small industrial power supply in the iron case allows conversion from 230V AC to 12V DC voltage maximum current of 10A or power of 120W

 

PM2.5 dust sensor GP2Y1010AU0F
PM2.5 dust sensor GP2Y1010AU0F

The dust sensor inside has an infrared LED and an IR receptor. This allows it to detect even the smallest interruption of the light flux from the diodes to the detector and to register this as a dust particle. It is also effective in detecting other finer particles, such as those found in cigarette smoke. It gives an analog value as output, which you can connect to the analog input of a microcontroller and accurately measure air quality.

Plastic platform (four wheel) for robotic projects
Plastic platform (four wheel) for robotic projects

Plastic platform with slots for four mountable wheels with four DC motors. Because it’s easy to assemble, it’s great for various hobby and school (robotic) projects. There are many more slots on the platform for various position and distance sensors, LEDs, batteries and controllers.

 

Material: plastic, transparent
Type: for four wheels
Contents: one plastic platform
• Needs to be added: four wheels with DC motors

Bluetooth audio module OVC3860
Bluetooth audio module OVC3860

The Bluetooth audio module allows you to stream, ie. transfer audio from a device (such as a cell phone or laptop) to this module via Bluetooth.

 

• Range: 10m
• Baud rate: 3Mbps
Voltage: 3.6V – 4.2V
• Current: 55mA
• Dimension: 16 x 29 x 2.3mm

ESD antistatic bracelet
ESD antistatic bracelet

ESD (ElectroStatic Discharge) or static electricity is a phenomenon where electricity flows suddenly between two electrically charged objects that are in touch or near each other. You experienced it, most likely,  when you touched something and felt “current” hurting you. Other than being unpleasant, there are no major consequences caused by ESD. But in electronics, ESD is very dangerous and can destroy your components and semiconductors.

 

This is where antistatic bracelet helps. If its other end is properly terminated to ground, it means that you are too. Through the 1M resistor, current flows to ground where it safely “goes” without being felt, and there won’t be any damage to components. It is always recommended to wear an anti-tatic bracelet whilte working with electronics.

Male DC connector to alligator cable
Male DC connector to alligator cable

Cable with classic “Crocodile” (crocodile or alligator connectors) on one end and a male 2.1mm DC connector on the other end for power supply connection.

5xAA battery holder
5xAA battery holder

Plastic holder for five AA batteries with two mounting holes. Connects batteries into series.

• Battery size: AA
• Number of batteries: 5

6xAA battery holder
6xAA battery holder

Plastic holder for six AA batteries with two mounting holes. Connects batteries into series.

• Battery size: AA
• Number of batteries: 6

Matrix keyboard 4x4
Matrix keyboard 4x4

The Matrix Keyboard is a system of 16 keys that are interconnected, allowing us to provide more complex data input to the Croduino / Arduino. With this keyboard you will create whole systems of menus, data entry and settings of various parameters.

Dimension: 68 x 65 mm

Raspberry Pi camera
Raspberry Pi camera

The Raspberry Pi Camera is a specially designed camera to work with all Raspberry Pi models. It connects to the Raspberry via a 15-pin flat cable into the camera connector on the RPi board. It natively runs, without installing the driver, on Raspbian OS.

10 segment LED indicator, monochrome
10 segment LED indicator, monochrome

10 segment LED indicator derivates from classical 7-segment LED display and it enables staggered display. It can be used for various purposes, such as battery level indicator. It has 10 bars in total which which glow in red color.

 

LED color: red
• Voltage: 3.3V
Dimensions: 25.4 x 10.1 x 7.9 mm

10 segment LED indicator, 4-colors
10 segment LED indicator, 4-colors

10 segment LED indicator derivates from classical 7-segment LED display and it enables staggered display. It can be used for various purposes, such as battery level indicator. It has 10 levels in total which glow in different colors.

 

LED color: 4-color (2x red, 3x yellow, 4x green, 1x blue)
Voltage: 3.3V
Dimensions: 25.4 x 10.1 x 7.9 mm

3mm LED diode pack (100 pieces)
3mm LED diode pack (100 pieces)

3mm diffused LEDs are great for trying out and experimenting with LEDs.

Out of stock Middle wheel for robotic projects
Middle wheel for robotic projects

This middle wheel will help you keep balance with 2-wheeled robotic sets.

DC motor 150RPM
DC motor 150RPM

DC motors can be inconvenient to use on low speed. With the help of mechanic and transfer using sprockets speed of this motor is slowed to a remarkably small speed. It is used for precise control over many mechanisms from robot wheels to precise mechanics.

 

• Voltage: 3V
• Axle diameter: 3mm
• Dimensions
: 12mm x 10mm x 36mm

DC motor 100RPM
DC motor 100RPM

DC motors can be inconvenient to use on low speeds. With the help of mechanics and transfer using sprockets speed of this motor is slowed to a remarkably small speed. It is used for precise control over many mechanisms from robot wheels to precise mechanics.

DC motor 30RPM
DC motor 30RPM

DC motors can be inconvenient to use on low speed. With the help of mechanic and transfer using sprockets speed of this motor is slowed to a remarkably small speed. It is used for precise control over many mechanisms from robot wheels to precise mechanics.

 

• Voltage: 3V
• Axle diameter: 3mm
• Dimensions
: 12mm x 10mm x 36mm

Wheel for robotic projects
Wheel for robotic projects

Wheel for robotic projects (65mm in diameter) with black tires made of rubber. It will roll your every project, but it doesn’t come with a motor.

Out of stock [RETIRED] Red wheel and motor for robotic projects
[RETIRED] Red wheel and motor for robotic projects

This product is retired and we won’t sell it anymore. This page is for reference only.

 

Wheel for robotic projects (65mm in diameter) with black tires made of rubber. It comes with a DC motor that runs from 3V to 6V, and will roll your every project!

Power supply 5V 3A 15W with microUSB connector
Power supply 5V 3A 15W with microUSB connector

A small power supply that provides 3A on 5V via micro-USB cable. You might recognize, this is a perfect power supply for the Raspberry Pi. It would also find its place in some other uses, such as powering up a micro-USB device or charging a device with a battery.

 

Industrial battery 9V
Industrial battery 9V

Quality 9V battery manufactured in Germany. Voltage 9V

Female header 13-pin 2.54mm
Female header 13-pin 2.54mm

Female header with 2.54mm (0.1 ”) classic pin spacing.

 

• Distance between pins: 2.54mm(0.1”)
• Number of pins: 13

items per page