Sale

In this category, you can find all products from the offer that are on sale.

Showing 169–192 of 200 results

Sort by:
easyC adapter
easyC adapter

This one is an adapter with easyC connectors for all older boards we’ve created without easyC connectors onboard.

Optocoupler SMD PC357N2J000F
Optocoupler SMD PC357N2J000F

PC357N2J000F is optocoupler in SMD format. For more details, check out the datasheet.

M3 washer
M3 washer

A classic washer for use with screws and nuts in our offer. Size M3.

M3 nut
M3 nut

M3 screw nut is a classic nut for all screws from our range. Practical for fastening the printed circuit boards to different housings or positions.

Male-Female standoff M3 12mm HEX
Male-Female standoff M3 12mm HEX

Threaded nut M3 (3mm) is ideal for combinations with other M3 screws and nuts for printed circuit boards. The part with the nut is 12mm long, and the threaded part (screw) is 10mm in length.

 

The nut is hexagonal, not rounded.

JST 2-pin male THT connector
JST 2-pin male THT connector

JST (more precisely JST XH) connectors are today the most common connectors for rechargeable lithium batteries but are also used for many other applications where a fast, easy and convenient connection is required.

2.54mm Jumper
2.54mm Jumper

Jumper is a well-known component that serves to connect two headers/pins. Standard spacing 2.54mm / 0.1inch.

DIP switch, 5 way
DIP switch, 5 way

The DIP switch is a small switch that is simply used with breadboard or protoboard.

Number of poles: 5
Pitch: (2.54mm)

Out of stock DIP switch, 2 way
DIP switch, 2 way

The DIP switch is a small switch that is simply used with breadboard or protoboard.

Number of poles: 2
Pitch: (2.54mm)

Male angular header 40-pin
Male angular header 40-pin

Male header at 90 degrees angle and pin spacing 2.54mm (0.1 ‘). 40-pin.

 

Comes in a pack of 5 pieces.

Locker with 16 drawers 70x50x30mm
Locker with 16 drawers 70x50x30mm

A well-organized workshop is a very important thing. Is there a better way to save components than well-organized compartments? This cabinet comes with 16 transparent drawers ideal for storing electronic components. On the front of each drawer, there is a space where it’s possible to add a label.

 

Cabinet dimensions: 220 x 70 x 160 mm
Tray dimensions: 70 x 50 x 30 mm
Material: polypropylene and polystyrene
Number of drawers:16

Standoff M3 5mm HEX
Standoff M3 5mm HEX

M3 diameter nut (5mm) which is ideal for combinations with other M3 screws and nuts on printed circuit boards. Length is 5mm.

 

The nut is hexagonal, not rounded.

Male-Female standoff M3 5mm HEX
Male-Female standoff M3 5mm HEX

Threaded nut M3 (3mm) is ideal for combinations with other M3 screws and nuts for printed circuit boards. The part with the nut is 5mm long, and the threaded part (screw) is 5mm in length.

 

The nut is hexagonal, not rounded.

Male-Female standoff M3 25mm HEX
Male-Female standoff M3 25mm HEX

Threaded nut M3 (3mm) is ideal for combinations with other M3 screws and nuts for printed circuit boards. The part with the nut is 25mm long, and the threaded part (screw) is 10mm in length.

 

The nut is hexagonal, not rounded.

Crystal THT 32.768kHz
Crystal THT 32.768kHz

Frequency: 32.768kHz
Crystal

Electromagnetic door lock
Electromagnetic door lock

Electromagnetic lock allows you to lock the door by a microcontroller or an external system. This one can hold up to 60kg with its electromagnet, which is just enough to when used with doors of the appropriate weight. Ideally, it should be used on smaller doors, windows and drawers. It is activated, that is “locked” when it is supplied current.

It consists of two parts, piece of an electromagnet and the metal. Comes with all necessary screws for installation.

Membrane keyboard 1x4
Membrane keyboard 1x4

Mini version of our larger membrane keyboard that will sometimes still be sufficient for projects that need a few inputs.

 

SCT-013-030 split-core ammeter, max. 100A
SCT-013-030 split-core ammeter, max. 100A

This small sensor will measure the current that passes through his wire transformer and the information you get in return is in the form of a small stream. That small current will be measured as a voltage drop that is already built into this sensor. The sensor works on the principle of an open transformer. It’s not as complicated as it sounds. For more details, check out the datasheet.

Only one wire put through the hole!

SCT-013-030 split-core ammeter, max. 30A
SCT-013-030 split-core ammeter, max. 30A

This small sensor will measure the current that passes through his wire transformer and the information you get in return is in the form of a small stream. That small current will be measured as a voltage drop that is already built into this sensor. The sensor works on the principle of an open transformer. It’s not as complicated as it sounds. For more details, check out the datasheet.

 

Only one wire put through the hole!

GSM/GPRS antenna 5dBi, 1.5m cable, SMA-M
GSM/GPRS antenna 5dBi, 1.5m cable, SMA-M

GSM / GPRS antenna with adapter-bucket that corresponds to SIM808 breakout. Waterproof and 3M adhesive tape on the other side.

Crystal 8MHz HC49S
Crystal 8MHz HC49S

Crystal (oscillator) is identical to one that uses a frequency of 8MHz, in HC49S (standard THT) packaging.

 

Power supply 5V 700mA 3.5W
Power supply 5V 700mA 3.5W

This small AC-DC power supply is a simple solution to supply Dasduino or other small devices that run on 5V. It is simple, give it an AC voltage of 230V from the socket, and it outputs 5V with a maximum of 700mA, which is 3.5W. Furthermore, the power plug itself is really small and will fit in any case.

NEMA17 stepper motor
NEMA17 stepper motor

NEMA17 is a smaller stepper motor with high precision. Often we find it in 3D printers and small CNC machines since it has sufficient power to move small items. You will also use it in the 3D printer, CNC, robot or for the accurate control of anything which turns or moves.

We recommend the A4988 stepper motor driver.

Resetable SMD fuse 0.5A 1206
Resetable SMD fuse 0.5A 1206

A fuse that we use in our devices that are connected via the USB port on the computer. Automatically stops when the power flowing through it is greater than 500mA, and type is a quick blow. This is actually a silicon fuse, which, when interrupted, after a few minutes returns back to the state in which it conducts electricity – no need to change the fuse!

items per page