Tools & Lab equipment

In this category you can find everything you need for your small electronic laboratory. For example, cleaning chemicals, multimeters, connectors, etc.

Showing 1–24 of 119 results

Sort by:
Protoboard 12x8cm
Protoboard 12x8cm

Protoboard used for the permanent connection (also known as soldering) of electronic components. High quality, with solder mask on both sides, as well as column and row markings.

 

Digital multimeter
Digital multimeter

The multimeter, along with the soldering iron, is the basic tool of every electronics engineer. If you are a beginner, this multimeter will be enough for you to learn to measure various physical quantities related to electronics. Measure AC and DC voltage, AC and DC current, resistance, transistor gain, test diodes and conductivity – all with this multimeter. It comes with test cables, and you’ll only need 2 AAA batteries to get started. It also has a fuse to measure current, as a safety supplement.

If you are looking for a best buy multimeter for your workshop, to work for years (probably centuries) and give reliable readings, you have found it. The multimeter does not have automatic range detection, no backlight or frequency measurement, but it will measure DC voltage up to 1000V, AC voltage up to 750V, DC current up to 10A, capacity up to 100uF, resistance up to 200Mohm. It has a buzzer to conduct conductivity and it has an automatic shut-off.

 

• DC voltage measuring ranges: 200mV, 2V, 20V, 200V, 1000V
• AC voltage measuring ranges: 200mV, 2V, 20V, 200V, 750V
• DC current measurement ranges: 2mA, 20mA, 200mA, 10A
Capacity measurement areas: 20nF, 200nF, 2uF, 20uF, 200uF
• Resistance measurement areas: 200ohm, 2000ohm, 20kohm, 200kohm, 2Mohm, 20Mohm, 200Mohm
• Dimensions: 190 x 90mm

Screw M3 10mm HEX
Screw M3 10mm HEX

Standard M3 countersunk head screw.

 

Threaded insert M3 3mm
Threaded insert M3 3mm

The threaded insert is used to repair a damaged thread, for inserting into soft materials where it provides a permanent thread (eg. plastic).

Spare handle for soldering station
Spare handle for soldering station

As the name suggests, a spare handle for the soldering station from our offer.

Out of stock Container divider for metal locker
Container divider for metal locker

If you need dividers for a metal cabinet to put several components in one container, you will be able to do it with this product. Suitable for:

• Metal locker with 30 drawers

20x transparent plastic container 100x56x125mm
20x transparent plastic container 100x56x125mm

Workshop organization is very important, and what is better for storing components than well-organized containers? There are 20 of these containers in a package and they are ideal for storing electronic components. They are quite large, so you can store larger products. We use identical ones like this in our warehouses! On the front of each tray, there is a space where you can stick a label with the description of the component inside. The containers can be taken apart and put back together, so they can be used in various stacking configurations.

 

20x plastic container 100x56x125mm
20x plastic container 100x56x125mm

Workshop organization is very important, and what is better for storing components than well-organized containers? There are 20 of these containers in a package and they are ideal for storing electronic components. They are quite large, so you can store larger products. We use identical ones like this in our warehouses! On the front of each tray, there is a space where you can stick a label with the description of the component inside. The containers can be taken apart and put back together, so they can be used in various stacking configurations.

Locker with 12 drawers 54x34x140mm
Locker with 12 drawers 54x34x140mm

A well-organized workshop is a very important thing. Is there a better way to save components than well-organized compartments? This cabinet comes with 12 transparent drawers ideal for storing electronic components. On the front of each drawer, there is a space where it’s possible to add a label.

Electrical tape 30m
Electrical tape 30m

Electrical tape is well known to everyone – it provides insulation between various connections. This is an extra-large, 30m roll. The color you receive will be randomly selected.

Osciloscope probe P6100 100MHz
Osciloscope probe P6100 100MHz

Spare oscilloscope probe.

 

Logic analyzer
Logic analyzer

A logic analyzer allows you to record and display a signal, usually a bus, on your computer screen in real time. It is powered via USB, and simultaneously records up to 8 channels. Cables are also included.

 

Out of stock PCB breadboard/protoboard
PCB breadboard/protoboard

This PCB is also a protoboard. It offers both the simplicity and the functionality of a breadboard. It is the same size as the modular half-size breadboard and has the same connections to pins. The board allows you to make the temporary circuit from the breadboard permanent.

 

Product usage tips:

 

The board has three mounting holes for secure placement on different surfaces.

 

Out of stock Mini PCB breadboard/protoboard
Mini PCB breadboard/protoboard

A 2-in-1 breadboard and PCB is what you get when combining the simplicity of the one and functionality of the other. It is the same size as the modular mini breadboard and has the same connections to pins. This PCB lets you move your circuit from a temporary connection on a classic breadboard to a more permanent place by soldering all the pieces.

 

Product usage tips:

The board can be secured in place by using the two mounting holes in the middle.

EU Schuko adapter
EU Schuko adapter

Classic power adapter which converts other power connectors to EU schuko power connector

Solder Sn60Pb40 1.0mm 50g
Solder Sn60Pb40 1.0mm 50g

Classic solder for working with a hand soldering iron. In the center of the solder is a solder paste that simultaneously cleans the surface on which it is soldered and allows better adhesion of the solder. This solder is the so-called leaded.

 

Quantity: 50g
Diameter: 1.0mm
• Composition: Sn60Pb40

Protoboard 6x4cm
Protoboard 6x4cm

Protoboard used for the permanent connection (also known as soldering) of electronic components. High quality, with solder mask on one side, as well as column and row markings.

 

• Dimensions: 6cm x 4cm

Cutting pliers
Cutting pliers

Classic pliers for precise cutting of the legs after soldering or for cutting the wire and removing the insulation.

Soldering iron stand
Soldering iron stand

Since the soldering iron is hot during operation, it is necessary to have a safe place to store it. This stand is affordable and serves its purpose. It also contains a sponge in its base on which it is possible to clean the tip of the soldering iron.

Out of stock Kapton tape 30mm
Kapton tape 30mm

Kapton is a special type of material that is resistant to high temperatures and does not conduct electricity. When it is thinly rolled out and adhesive tape is placed on it, we get a kapton tape. In electronics, it is often used to protect plastic components from damage during soldering and as an insulator.

 

• Tape width: 30mm
• Tape length: 10m

 

Desoldering wick 2mm
Desoldering wick 2mm

The desoldering wick is a very practical aid during soldering. It is an interwoven copper wire soaked in flux to catch the solder. If you have a spot where you need to remove the solder, this tape will do a great job. Unlike the desoldering pump, this tape can completely remove the solder from the hole or from the pad.

 

Length: 1.5m
Width: 2.0mm

Soldering station with hot air
Soldering station with hot air

Soldering station with hot air is a combination that will solve all the problems regarding soldering and desoldering, whether it is THT or SMD components. The 50W soldering station has enough power to solder the components with the highest thermal mass, and comes with a pointed tip. Hot air will be useful for soldering and desoldering SMD components. It comes with three extensions with which it is possible to select the width of the hot air flow. With the station also comes a stand for both the soldering iron and for hot air.

 

• Maximum hot air power: 450W
Hot air temperature range: 100℃ – 500℃
Hot air flow: 120L/min max.
• Maximum power of soldering iron: 50W
Hot air temperature range: 200℃ – 500℃
• Manufacturer and model: Gordak 968
• Input voltage: 230V

Soldering station 60W
Soldering station 60W

Soldering station SS-936A is a more serious part of equipment for electronic workshop. It contains a transformer in its base, thanks to which it can deliver high power at high speed. Therefore, you will easily solder the thickest wires and components to ground polygons. Power is up to 60W, adjustable temperatures up to 500 ℃ with a quality soldering iron that heats up quickly. It comes with spike tip, a soldering iron stand and a sponge for cleaning the tip of the soldering iron. If you are looking for a soldering iron that will serve you for a long time, without spending too much money, the SS-936A is an ideal choice!

 

Soldering iron 40W
Soldering iron 40W

The soldering iron is an essential tool for anyone who does something with electronics. Although we enjoy using more expensive soldering irons, this one is affordable and does the job – it will come in handy as a first or spare soldering iron, and with its price, it is affordable to everyone. The process of soldering permanently connects two pieces of metal. In electronics it is the joints between wires, components and boards. Whatever you want to do, you’ll always need to solder something, especially if you’re going to fix electronics – you must have a soldering iron. This soldering iron has a power of 40W, which is quite enough for soldering and desoldering in most cases.

items per page