Filter
Second filter
Third filter
Fourth filter

Tools & Lab equipment

In this category you can find everything you need for your small electronic laboratory. For example, cleaning chemicals, multimeters, connectors, etc.

Showing 73–96 of 123 results

Sort by:
Out of stock Isopropyl alcohol, 500mL
Isopropyl alcohol, 500mL

Isopropyl alcohol is a high purity alcohol that can often be found in every workshop. It is useful for cleaning printed circuit boards because it evaporates quickly and removes grease deposits (such as flux or paste traces) and other impurities. It is also used with 3D printers to clean the print surface and for all other applications where purity is required. It is important to note that it is antibacterial.

• Package: 500mL
Purity: 96%

Thermocouple temperature sensor J-type
Thermocouple temperature sensor J-type

Thermocouple is a temperature measuring device, with its range usually bigger than standard sensors. If you’ve ever bought a multimeter and got some kind of temperature sensor, that is the thermocouple.

 

Ceramic-based lubricant 100mL
Ceramic-based lubricant 100mL

Ceramic-based lubricant is often used for mechanical parts that is under constant heavy load. It has an extremely large temperature range,which is why it can also be used in owen. It does not contain metals or silicone, and is resistant to chemicals, water and all weather conditions.

 

• Package: 100mL
• Temperature range: -50 – 1200°C

Graphite-based lubricant 100mL
Graphite-based lubricant 100mL

Graphite-based lubricant contains carefully added additives that extend shelf life and load resistance. It is also water resistant.

 

• Package: 100mL
• Temperature range for use: -20 – 50°C

Out of stock Compressed air 300mL
Compressed air 300mL

Compressed air is most commonly used for cleaning electronics. Since the gas from the container comes out under high pressure, it is perfect for cleaning dust and all particles. It is colorless, odorless and leaves no traces. It is able to reach even the most inaccessible parts of any electronic equipment and is especially practical for cleaning places you don’t want to touch.

 

• Package: 300mL

Out of stock Lead-free solder paste Sn96,5Ag2Cu0,5 1.4mL
Lead-free solder paste Sn96,5Ag2Cu0,5 1.4mL

Solder paste is used during SMT production, i.e. when SMT components are used. The paste is placed in specific places where it’s desired to achieve a solder joint, either by hand or with a stencil. After that, the components are placed and soldered in special ovens. This paste does not require cleaning after soldering (no clean). Paste is lead-free, which means it does not contain lead.

 

Composition: Sn96,5Ag3Cu0,5
Melting point: 252°C
Solder ball sizes: 25-45µm
Packaging: 1.4mL
Lead-free
No clean

 

At e-radionica.com solder paste is stored in the refrigerator, at a temperature of 8 ° C, which is the recommended storage temperature. We recommend that you choose express delivery for orders that contain this item in order to avoid product being exposed to high temperatures.

Soldering station 60W
Soldering station 60W

Soldering station SS-936A is a more serious part of equipment for electronic workshop. It contains a transformer in its base, thanks to which it can deliver high power at high speed. Therefore, you will easily solder the thickest wires and components to ground polygons. Power is up to 60W, adjustable temperatures up to 500 ℃ with a quality soldering iron that heats up quickly. It comes with spike tip, a soldering iron stand and a sponge for cleaning the tip of the soldering iron. If you are looking for a soldering iron that will serve you for a long time, without spending too much money, the SS-936A is an ideal choice!

 

Soldering station with hot air
Soldering station with hot air

Soldering station with hot air is a combination that will solve all the problems regarding soldering and desoldering, whether it is THT or SMD components. The 50W soldering station has enough power to solder the components with the highest thermal mass, and comes with a pointed tip. Hot air will be useful for soldering and desoldering SMD components. It comes with three extensions with which it is possible to select the width of the hot air flow. With the station also comes a stand for both the soldering iron and for hot air.

 

• Maximum hot air power: 450W
Hot air temperature range: 100℃ – 500℃
Hot air flow: 120L/min max.
• Maximum power of soldering iron: 50W
Hot air temperature range: 200℃ – 500℃
• Manufacturer and model: Gordak 968
• Input voltage: 230V

Copper-based lubricant 100mL
Copper-based lubricant 100mL

Copper-based lubricant is intended for lubrication of all types of mechanical joints that work at extremely high temperatures which makes it suitable for use in owen.

 

Package: 100mL
• Temperature range: -40 – 1100°C

Screw lubricant 100mL
Screw lubricant 100mL

This lubricant is specially developed for use with all types of threads. It ensures that the threads will remain protected from oxidation and rust in the long run and prevents them from seizure of metal part, thus enabling very easy assembly and disassembly after application. It works in conditions of higher humidity, higher pressure and higher temperature. Water resistant and adheres very well to metal surfaces.

 

• Package: 100mL

High-temperature lubricant, 100mL
High-temperature lubricant, 100mL

This lubricant contains molybdenum disulfide which has a very low frictional resistance. It is used for metal parts and prevents them from collapsing and wearing out. It is very often used to lubricate parts of heavy industrial equipment, such as forklifts or cranes. For application at temperatures up to 150C.

 

Temperature : -30 – 150C
Package: 100mL

M3 nut
M3 nut

M3 screw nut is a classic nut for all screws from our range. Practical for fastening the printed circuit boards to different housings or positions.

Screw M3 10mm HEX
Screw M3 10mm HEX

Standard M3 countersunk head screw.

 

Standoff M3 5mm HEX
Standoff M3 5mm HEX

M3 diameter nut (5mm) which is ideal for combinations with other M3 screws and nuts on printed circuit boards. Length is 5mm.

 

The nut is hexagonal, not rounded.

Standoff M3 8mm HEX
Standoff M3 8mm HEX

M3 diameter standoff with a thread is ideal with bolts, nuts and screw + standoff combinations. It is most often used as a spacer on PCBs. A standoff is hexagon-shaped.

 

• Length: 8mm
• Threaded standoff
• Hexagonal (HEX) shape

M3 washer
M3 washer

A classic washer for use with screws and nuts in our offer. Size M3.

Screw M3 12mm HEX
Screw M3 12mm HEX

Standard M3 countersunk head screw.

 

Lenght: 12mm
M3
• Countersunk head screw
• Hexagonal (allen key) head

Small pliers
Small pliers

Classic small pliers as a basic tool of every electronic workshop. It will come in handy for bending components, cutting or just holding.

Cleaning wipes for electronics
Cleaning wipes for electronics

These wipes are intended for cleaning consumer electronics that are used every day: monitors, mouse, keyboard, laptop, all types of laboratory equipment such as a multimeter, oscilloscope, power supply, etc..

 

• Quantity: 24

PCB cutting knife
PCB cutting knife

Cutting knife is actually a sharp scalpel that you can operate very precisely. It will be very useful for cutting faulty traces on printed circuit boards, but also for any other purpose of precision cutting or marking.

 

• Material: steel

Standoff M3 12mm HEX
Standoff M3 12mm HEX

M3 diameter standoff with a thread is ideal with bolts, nuts and screw + standoff combinations. It is most often used as a spacer on PCBs. A standoff is hexagon-shaped.

 

• Length: 12mm
• Threaded standoff
Hexagonal (HEX) shape

Standoff M3 15mm HEX
Standoff M3 15mm HEX

M3 diameter standoff with a thread is ideal with bolts, nuts and screw + standoff combinations. It is most often used as a spacer on PCBs. A standoff is hexagon-shaped.

 

Length: 15mm
Threaded standoff
Hexagonal (HEX) shape

Male-Female standoff M3 15mm HEX
Male-Female standoff M3 15mm HEX

M3 diameter threaded nut ideal for combinations with other M3 screws and nuts used as standoffs for PCBs. A standoff is hexagon-shaped.

 

• Length: 15mm
• A threaded standoff, screw matches M3 thread
Hexagonal (HEX) shape

Standoff M3 20mm HEX
Standoff M3 20mm HEX

M3 diameter standoff with a thread is ideal with bolts, nuts and screw + standoff combinations. It is most often used as a spacer on PCBs. A standoff is hexagon-shaped.

 

Length: 20mm
Threaded standoff
Hexagonal (HEX) shape

items per page