Filter
Second filter
Third filter
Fourth filter

Tools & Lab equipment

In this category you can find everything you need for your small electronic laboratory. For example, cleaning chemicals, multimeters, connectors, etc.

Showing 97–120 of 123 results

Sort by:
Male-Female standoff M3 20mm HEX
Male-Female standoff M3 20mm HEX

M3 diameter threaded nut ideal for combinations with other M3 screws and nuts used as standoffs for PCBs. A standoff is hexagon-shaped.

 

Length: 20mm
A threaded standoff, screw matches M3 thread
Hexagonal (HEX) shape

Standoff M3 25mm HEX
Standoff M3 25mm HEX

M3 diameter standoff with a thread is ideal with bolts, nuts and screw + standoff combinations. It is most often used as a spacer on PCBs. A standoff is hexagon-shaped.

 

Length: 25mm
Threaded standoff
Hexagonal (HEX) shape

Male-Female standoff M3 25mm HEX
Male-Female standoff M3 25mm HEX

Threaded nut M3 (3mm) is ideal for combinations with other M3 screws and nuts for printed circuit boards. The part with the nut is 25mm long, and the threaded part (screw) is 10mm in length.

 

The nut is hexagonal, not rounded.

Locker with 12 drawers 54x34x140mm
Locker with 12 drawers 54x34x140mm

A well-organized workshop is a very important thing. Is there a better way to save components than well-organized compartments? This cabinet comes with 12 transparent drawers ideal for storing electronic components. On the front of each drawer, there is a space where it’s possible to add a label.

Out of stock Solder paste Sn62Pb36Ag2 1.4mL
Solder paste Sn62Pb36Ag2 1.4mL

Solder paste is used during SMT production, i.e. when SMT components are used. The paste is placed in specific places where it’s desired to achieve a solder joint, either by hand or with a stencil. After that, the components are placed and soldered in special ovens. This paste does not require cleaning after soldering and has a low melting point.

 

Composition: Sn62Pb36Ag2
Melting point: 198°C
Solder ball sizes: 25-45µm
Packaging: 1.4mL
Lead based
No clean

 

At e-radionica.com solder paste is stored in the refrigerator, at a temperature of 8 ° C, which is the recommended storage temperature. We recommend that you choose express delivery for orders that contain this item in order to avoid product being exposed to high temperatures.

Digital multimetar for beginners
Digital multimetar for beginners

The multimeter, along with the soldering iron, is the basic tool of every electronics engineer. If you are a beginner, this multimeter will be enough for you to learn to measure various physical quantities related to electronics. Measure AC and DC voltage, AC and DC current, resistance, transistor gain, test diodes and conductivity – all with this multimeter. It comes with test cables, and you’ll only need a 9V battery to get started. It also has a fuse to measure current, as a safety supplement.

 

This is not a multimeter filled with features, this is a multimeter for beginners, pupils and students who want their first, affordable measuring device. The multimeter does not have automatic range determination, has no backlight nor does it measure frequency, but, therefore, it will measure DC voltage up to 1000V, AC voltage up to 750V, DC current up to 10A.

 

• DC voltage measuring ranges: 200mV, 2V, 20V, 200V, 1000V
• AC voltage measuring ranges: 200V, 750V
DC current measurement ranges: 200uA, 2000uA, 20mA, 200mA, 10A
Resistance measurement areas: 200ohm, 2000ohm, 20kohm, 200kohm, 2000kohm
• Maximum current when testing diodes: 1.5mA
• Dimensions: 126 x 70mm

Container divider for metal locker
Container divider for metal locker

If you need dividers for a metal cabinet to put several components in one container, you will be able to do it with this product. Suitable for:

• Metal locker with 30 drawers

Photo lacquer developer 22g
Photo lacquer developer 22g

Photo lacquer developer for making printed circuit boards by photo process.

 

• Weight: 22g
•  Does not contain NaOH

Heat conductive glue, 10g
Heat conductive glue, 10g

Thermal conductivity is a property often required in cases where two metals are in contact. One of them needs to be cooled, while the other is most often a refrigerator. Although thermal paste is a logical choice in this case, thermally conductive adhesive will be particularly useful in some cases, especially when the joint is under mechanical stress. This adhesive is often used in electronics to attach temperature sensors, coolers and el. components and LEDs..

 

Weight: 10g
Operating temperature: -50 – 200°C
Thermal conductivity: 2W/mK
Drying time: 5min do 2

4h

Instructions for use:
• The surface must be cleaned before applying the adhesive
• Apply the glue thinly, not thicker than 6mm
• Use the glue 12 months after opening

Silicone heat conductive paste, diamond, 4g
Silicone heat conductive paste, diamond, 4g

Thermally conductive paste is used at the points of contact of two metals where thermal conductivity is required. It is most often some type of heatsink, either for the processor or any other type of electronic component. The base of this thermally conductive paste is silicone, and diamond dust is added to it in a percentage of 10% to increase the thermal conductivity. Comes with a special application brush.

 

Mass: 4g
Thermal conductivityt: >4W/mK

SMD vacuum tweezers
SMD vacuum tweezers

The SMD components are very small and the tweezers help us to do the job properly. And what should we do when we are having larger components, such as integrated circuits that can be so large that we can not grab them with tweezers? SMD vacuum tweezer will help us here. It uses a vacuum to grab the surface of IC. The vacuum is activated by pressing a small button, so using this tool won’t be a problem. It comes with several tips for different integrated circuits.

EU Schuko adapter
EU Schuko adapter

Classic power adapter which converts other power connectors to EU schuko power connector

Tubed soldermask, black
Tubed soldermask, black

Soldermask is a layer on a printed circuit board that gives it a color, usually green, and is used to protect the tile from corrosion, easier soldering and visual appearance. This soldermask is in a liquid state, so you can easily apply it to places you want to protect further, such as wires that have been added or lines that have been damaged. It enters the solid state under UV light.

Osciloscope probe P6100 100MHz
Osciloscope probe P6100 100MHz

Spare oscilloscope probe.

 

Isopropyl alcohol, 5L
Isopropyl alcohol, 5L

Isopropyl alcohol is a high purity alcohol that can often be found in every workshop. It is useful for cleaning printed circuit boards because it evaporates quickly and removes grease deposits (such as flux or paste traces) and other impurities. It is also used with 3D printers to clean the print surface and for all other applications where purity is required. It is important to note that it is antibacterial.

 

• Packaging: 5L
Purity: 96%

STlink v2 programmer
STlink v2 programmer

STLink standardly is known programmer for STM microcontrollers. Works with a whole specter of tools for STM, including mbed, Atollic Studio, Arduino IDE etc.

Heat conductive paste 1g
Heat conductive paste 1g

Thermally conductive paste is used at the points of contact of two metals where thermal conductivity is required. It is most often some type of heatsink, either for the processor or any other type of electronic component. The base of this thermally conductive paste is silicone, and steel dust is added to it, which achieves thermal conductivity.

 

Mass: 1g
Thermal conductivityt: >6W/mK

Heat conductive paste, gold, 1g
Heat conductive paste, gold, 1g

Thermally conductive paste is used at the points of contact of two metals where thermal conductivity is required. It is most often some type of heatsink, either for the processor or any other type of electronic component. The base of this thermally conductive paste is silicone, and gold dust is added to it in a percentage of as much as 45%, which achieves maximum thermal conductivity – as much as 3 times higher than ordinary paste. Comes with a plastic mounting spatula.

 

Mass: 1g
Thermal conductivity: >2.8W/mK

Component tester M328
Component tester M328

A multimeter is a tool without no electrician can work, but when these little tools appear we ask ourselves what can we do without them! Give this components tester almost anything and it will tell you which component it is and even some more details about it! For example, you connect a resistor on it and it will show it is a resistor and give you his value in ohms. same goes for capacitors and inductors. Give it NPN or PNP transistor it will hFE and Vf. For diodes, it will tell you its voltage drop and capacity. The most interesting is that the tool will know which component is connected.

USB Blaster FPGA programmer
USB Blaster FPGA programmer

This device is used to connect you to your FPGA or CPLD manufactured by Cyclone or Altera by 10-pin FPGA cable

 

 Connectors: USB 2.0, FPGA 10-pin

 

Cables are included with the device.

USB soldering iron
USB soldering iron

This small, practical, and portable USB soldering iron powered from PC, laptop, or portable batter is perfect for makers! It works over any USB port and the small tip makes it very precise.  The tip also warms up very quickly, so you can start soldering around 15 seconds after the ignition. Soldering iron comes with a bracket, small amount of solder and a stand.

 

Of course, be careful while working with soldering iron. Iron’s tip is at temperature is 300-400 degrees Celsius.

Power: 8W
Input voltage: 5V
Length: 16cm

Spare handle for soldering station
Spare handle for soldering station

As the name suggests, a spare handle for the soldering station from our offer.

Prototyping wire 10m, blue, AWG25
Prototyping wire 10m, blue, AWG25

It is extremely easy to remove insulation and solder with this stranded copper wire. It will serve great in small projects and prototypes.

Prototyping wire 10m, yellow, AWG25
Prototyping wire 10m, yellow, AWG25

It is extremely easy to remove insulation and solder with this stranded copper wire. It will serve great in small projects and prototypes.

items per page