easyC

Showing 1–24 of 26 results

Sort by:
Out of stock Simple fire sensor with easyC
Simple fire sensor with easyC

On this module, there is a component, a phototransistor, which is capable of detecting infrared radiation. Since fire emits a large amount of infrared radiation, this sensor will detect it, but that is not its only application. Wherever there are IR (infrared) waves, this sensor will detect them, including from solar radiation.

 

The simple sensor has easyC connectors, which enables quick and easy connection with Dasduino microcontroller boards.

Out of stock LCD display 16x2 I2C white/blue
LCD display 16x2 I2C white/blue

LCD display with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information. An I2C LCD adapter is soldered to this LCD screen, which enables characters to be displayed on the LCD screen via the I2C bus. It also has an easyC connector for a really simple connection.

Slider potentiometer breakout with easyC
Slider potentiometer breakout with easyC

Potentiometers are well known all around, and the sliding potentiometer is just one of its versions. You’ve probably seen it in some music equipment, and now you have the chance to add it to your project!

 

This board has easyC connector. Thanks to easyC ecosystem, this board can be connected using off-the-shelf cables, without soldering. Controlling the is as simple as it gets, too.

Benzene, Toluene, Acetone, Formaldehyde sensor MQ138 breakout with easyC
Benzene, Toluene, Acetone, Formaldehyde sensor MQ138 breakout with easyC

The MQ138 sensor is specifically designed to detect various gases, with a primary focus on air quality monitoring. While its main target gas is formaldehyde (HCHO), it is also sensitive to a range of other gases, including volatile organic compounds (VOCs) such as toluene, alcohol, acetone, and hydrogen, as well as other harmful gases commonly found in the environment. It requires a short time to heat up in order to work correctly.

The breakout board provides both digital and analog output through the easyC system. Sensor readings are obtained through the easyC.

 

Product usage tips:

 

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

Ammonia sensor MQ137 breakout with easyC
Ammonia sensor MQ137 breakout with easyC

The sensitivity and selectivity of the MQ137 sensor allow it to effectively detect and measure levels of ammonia, making it a valuable tool for applications such as gas leakage detection, agricultural monitoring, and environmental sensing. By integrating the MQ137 sensor with appropriate electronic circuits and microcontrollers like Dasduino, you can create systems that provide real-time monitoring and prompt alerts in the presence of hazardous ammonia concentrations. It requires a short time to heat up in order to work correctly.

The breakout board provides digital and analog information through the easyC system. Sensor readings are obtained through easyC.

 

Product usage tips:

 

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

Air quality sensor MQ135 breakout with easyC
Air quality sensor MQ135 breakout with easyC

The versatility of the MQ135 sensor allows for its use in applications such as indoor air quality monitoring, gas leakage detection, and environmental sensing. While its main target gas is carbon dioxide (CO2), it is also sensitive to various other gases, including volatile organic compounds (VOCs), alcohol vapors, benzene, smoke, and other harmful gases commonly found in the environment. By integrating the MQ135 sensor with appropriate electronic circuits and microcontrollers like Dasduino, you can create systems that enable real-time monitoring and analysis of gas concentrations, allowing you to take necessary actions to maintain a healthy and safe environment.

The MQ135 air quality measurement module operates at 5V and consumes approximately 150mA. It requires some time to heat up before it can provide accurate results.

The breakout board provides digital and analog information through the easyC system. Sensor readings are obtained through easyC.

 

Product usage tips:

 

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

Ozone sensor MQ131 breakout with easyC
Ozone sensor MQ131 breakout with easyC

The sensitivity and selectivity of the MQ131 sensor enable it to effectively detect and measure ozone levels, making it a valuable tool for applications such as air quality monitoring, ozone generators, and ozone leakage detection systems. By integrating the MQ131 sensor with appropriate electronic circuits and microcontrollers like Dasduino, you can create systems that enable real-time monitoring of ozone concentration and trigger alerts when dangerous levels are detected.

The breakout board provides digital and analog information through the easyC system. Sensor readings are obtained through easyC.

 

Product usage tips:

 

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

CO, flammable gasses sensor MQ9 breakout with easyC
CO, flammable gasses sensor MQ9 breakout with easyC

We are surrounded by invisible gases everywhere. Although we generally don’t have to worry about them, in certain circumstances they can be very flammable and dangerous. The MQ9 breakout detects carbon monoxide, methane, propane and other flammable gases so that the right measures can be taken in time. The sensor detects carbon monoxide at 10-1000 ppm and other flammable gases at 100-10000 ppm.

The breakout board provides digital and analog information via the easyC system. Sensor readings are obtained via easyC.

 

Product usage tips:

 

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

Hydrogen sensor MQ8 breakout with easyC
Hydrogen sensor MQ8 breakout with easyC

Hydrogen is all around us, and it is dangerous because it is highly flammable. Its leakage can be very dangerous for both life and property. That is why it is important to detect any leakage to prevent such losses in the industry. To do this, hydrogen sensors such as the MQ8 breakout board are used. The sensor detects hydrogen in the range of 100-1000 ppm.

The breakout board provides digital and analog information via the easyC system. Sensor readings are obtained via easyC.

 

Product usage tips:

 

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

CO sensor MQ7 breakout with easyC
CO sensor MQ7 breakout with easyC

The sensitivity and selectivity of the MQ7 sensor enable it to effectively detect and measure carbon monoxide levels, making it a crucial tool for applications such as gas leakage detection, security systems, and environmental monitoring. By integrating the MQ7 sensor with appropriate electronic circuits and microcontrollers like Dasduino, you can create systems that enable real-time monitoring and prompt alerts in the presence of hazardous CO concentrations. It requires a short time to warm up in order to work correctly.

The breakout board provides digital and analog information through the easyC system. Sensor readings are obtained through easyC.

 

Product usage tips:

 

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

LPG, Butane sensor MQ6 breakout with easyC
LPG, Butane sensor MQ6 breakout with easyC

Humans can detect many smells, but may have difficulty distinguishing gases. That’s why we use sensors like the MQ6 that detects LPG and butane in the air. When heated to the optimal operating temperature, it very quickly detects changes in air concentration between 200 and 10,000 ppm.

The breakout board provides digital and analog information via the easyC system. Sensor readings are obtained via easyC.

 

Product usage tips:

 

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

Natural gas, LPG sensor MQ5 breakout with easyC
Natural gas, LPG sensor MQ5 breakout with easyC

Is your office located near a high traffic area? Are you concerned about the presence of natural and liquefied petroleum gases in your work environment? The MQ series sensors can help detect various gases, and the MQ5 sensor is an easy-to-use sensor that provides information about the levels of natural gases and LPG (liquefied petroleum gas) in your surroundings. It quickly detects gas particles in the range of 200 to 10,000 ppm.

The breakout board provides digital and analog information through the easyC system. Sensor readings are obtained through easyC.

 

Product usage tips:

 

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

Methane, CNG sensor MQ4 breakout with easyC
Methane, CNG sensor MQ4 breakout with easyC

Have you ever wondered how much natural gas and methane are present in your living room? You can easily measure it! The MQ4 breakout board is a user-friendly sensor that detects natural gas and methane (CH4) in the air. Once it reaches operating temperature, it quickly detects changes in air concentration within the range of 200 to 10,000 ppm.

The breakout board provides digital and analog information through the easyC system. Sensor readings are obtained through easyC.

 

Product usage tips:

 

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

Alcohol, Ethanol sensor MQ3 breakout with easyC
Alcohol, Ethanol sensor MQ3 breakout with easyC

MQ sensors, including the MQ3 sensor, have the capability to detect various gases. The MQ3 sensor is specifically designed to detect alcohol vapors. This means it is sensitive to alcohols such as methanol, ethanol, and isopropanol. The MQ3 sensor is commonly used for measuring alcohol concentration in the air and serves as a useful tool for alerting to the presence of alcohol in the environment.

It is important to note that MQ sensors are not specific to only one gas and can react to other gases besides the ones they are specifically designed for. Therefore, it is important to use the MQ3 sensor exclusively for alcohol detection and follow the manufacturer’s instructions to achieve optimal accuracy and reliability of measurements. It requires a short time to heat up in order to work correctly.

The breakout board provides digital and analog information through the easyC system. Sensor readings are obtained through easyC.

 

Product usage tips:

 

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

Butane, LPG & Smoke sensor MQ2 breakout with easyC
Butane, LPG & Smoke sensor MQ2 breakout with easyC

MQ sensors, including the MQ2 sensor, have the capability to detect various gases. The MQ2 sensor is specifically designed to detect combustible gases such as LPG (liquefied petroleum gas), butane, propane, methane, alcohol, hydrogen, and smoke. These gases are commonly found in residential, industrial, and automotive environments. The sensor’s sensitivity and responsiveness enable it to detect even trace amounts of these gases, making it a valuable tool for gas leakage detection, fire detection, and air quality monitoring. It takes a short time to heat up in order to work correctly.

The breakout board provides digital and analog information through the easyC system. Sensor readings are obtained through easyC.

 

Product usage tips:

 

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

Hall effect sensor breakout with digital output & easyC
Hall effect sensor breakout with digital output & easyC

The hall effect sensor (Hall Effect sensor) will be able to detect the magnetic field in its vicinity thanks to the aforementioned physical law. A magnetic field that can be created by a magnet, a current flowing through a conductor or some third source, the Hall effect sensor will recognize each.

 

 

This sensor has a programmed threshold at which it will change the state of its output signal, so it is a sensor with a digital output. Through the easyC connectors, it enables a simple connection with the microcontroller.

 

Out of stock Simple rain sensor board with easyC
Simple rain sensor board with easyC

This sensor has two pieces – the rain sensor and the simple sensor. The rain sensor has nickel-coated lines on both sides. It measures moisture and outputs the data to the simple sensor that reads it. The simple sensor comes with easyC connectors onboard, which enables quick and easy connection with Dasduino microcontroller boards.

 

With the easy-to-use simple rain sensor, farmers can save water in irrigation. The sensor will alert them to shut down the water supply when it senses rain. It can even act as an automatic on and off switch, like turning on wipers on a car when it senses rain.

 

Out of stock Simple light sensor board with easyC
Simple light sensor board with easyC

Light is one of the most important things in the life of most living beings. This is why it is common to work with light sensors when learning about electronics. A simple light sensor has a light dependent resistor (LDR) and sensor on a breakout board for easy wiring. The simple sensor comes with easyC connectors onboard, which enables quick and easy connection with Dasduino microcontroller boards.

 

As the name suggests, an LDR will change its resistance depending on the amount of light it is exposed to. The amount of light and resistance are inversely proportional. The more light it is exposed to, the less resistance it will have. So if there is more light, the board will have a resistance of several hundred Ohms. If the resistor is in the dark, it will have a resistance of several thousand Ohms.

easyC Hub
easyC Hub

We made the easyC system for faster prototyping and easy connection between the components. However, some of the components have only one easyC port or you just want your cable managmenet made better. What to do in those cases? The easyC hub comes to the rescue! It has six connectors so you can easily expand your circuit. It’s as simple of a device as it can get.

 

Product usage tips:

You can connect easyC devices to the hub like you would to any other easyC device. Just plug the preferred easyC cable into the hub and a device you’re working with. That’s all there is to it.

 

You should avoid working with the hub in wet environments to ensure it lasts a long time. Be sure to watch the operating voltage of your circuit. Since the hub works on 3.3V, higher voltages can burn it and render it useless. There is a hole in the middle of the board so it can be secured to any surface.

Out of stock Simple soil humidity sensor board with easyC
Simple soil humidity sensor board with easyC

How many times have you watered your plants and feared you overdid it? With a simple soil moisture sensor, these worries are a thing of the past! This two-part sensor is easy to use. Two exposed prongs go into the soil and send moisture information to the sensor via a connected wire. The more water there is in the ground, the better the results will be.

 

The two parts are connected with the included JST-SH 2-pin cable. The simple sensor has easyC connectors on it, which enables quick and easy connection with Dasduino microcontroller boards.

Out of stock 2-channel relay board with easyC
2-channel relay board with easyC

Did you ever wanted to turn on and off a device that needs large current or voltage? Whether operating on DC or AC, a relay is what you need. A relay is actually an electronic switch that is activated by a signal we send from a Dasduino or Arduino. This module further simplifies the whole process because it contains everything you need for the relay to work, and you just have to connect it to the microcontroller and power supply. You don’t have to think about voltages and currents, insulation between high and low voltage or grounding, everything is already taken care of on the board.

 

This board has easyC connector. Thanks to easyC ecosystem, this board can be connected using off-the-shelf cables, without soldering. Controlling the is as simple as it gets, too.

1-channel relay board with easyC
1-channel relay board with easyC

Did you ever wanted to turn on and off a device that needs large current or voltage? Whether operating on DC or AC, a relay is what you need. A relay is actually an electronic switch that is activated by a signal we send from a Dasduino or Arduino. This module further simplifies the whole process because it contains everything you need for the relay to work, and you just have to connect it to the microcontroller and power supply. You don’t have to think about voltages and currents, insulation between high and low voltage or grounding, everything is already taken care of on the board.

 

This board has easyC connector. Thanks to easyC ecosystem, this board can be connected using off-the-shelf cables, without soldering. Controlling the is as simple as it gets, too.

Raspberry Pi easyC adapter
Raspberry Pi easyC adapter

This adapter makes it easy to connect easyC devices and sensors to the Raspberry Pi. It has 3 pieces of easyC connectors and a female header for Raspberry Pi, next to the header there are pins for connecting 5V and 3.3V and ground pins. It simply connects to the Raspberry Pi because its pinout matches the pinout of the Raspberry Pi.

items per page