Dasduino & Arduino
Inkplate e-paper
easyC
Raspberry Pi & micro:bit
Breadboards & Cables
Batteries & Power supplies
Sensors
Actuators
Communication modules
Tools & Lab equipment
Solder kits
Components
Sale
Key features
- Microcontroller: STM32F103C8T6
- Memory: 64 kB flash, 20 kB SRAM
- Power supply: 2.0 to 5V via JST connector, USB micro-B connector or battery pins
- Number of GPIO pins: 33
- Dimensions: 76 x 25 x 11 mm / 3" x 1" x 0.4"
Product features
Complimentary technical support
In case you ever get stuck with using this product, you can count on us. We provide free, no-strings-attached technical support with this product. Just reach out to us with your questions, and we’ll be there to help you.
easyC
easyC is a system for simple connection of microcontroller boards, sensors and actuators that enables fast prototyping without the possibility of error. The connection between the modules takes place with simple cables. easyC is based on I2C communication.
Made in EU
This board was developed and manufactured in European Union (Osijek, Croatia).
Open-source
We can proudly say that this product is fully open-source. Its hardware design (schematics, BOM, board design) is available on our GitHub (links below in the “Useful links & materials” section), and GitHub repositories for software files (if product comes with software) can be found in the same section below.
Product Description
Croduino STM32 is a microcontroller board based on the STM32F microcontroller. The STM32F103C8T6 32-bit ARM runs at 72 MHz and has 64 kB of flash memory and 20 kB of SRAM. The voltage required to run the board from 2.0 to 5 V. Since the STM32 has a low-power mode, the Croduino STM32 can certainly be used in projects where power consumption is a priority.
The microcontroller has 3 general-purpose timers and has SPI, I2C, USART, USB and CAN pins for communication. There are 33 GPIO pins on the board. Since the board does not have its own bootloader, the STlink programmer must be used in order to program the microcontroller.
To use the Croduino STM32 refer to the KKM.
Customer reviews & ratings
0 reviews
No reviews yet.
Be the first one to leave a review for this product.
You must be logged in to post a review.