{"product_id":"soldered-nula-can-esp32-s3","title":"Soldered NULA CAN ESP32-S3","description":"\u003cp\u003eSoldered NULA CAN ESP32-S3 is a development board in the NULA format, built around the \u003cstrong\u003eESP32-S3-WROOM-1-N8R8\u003c\/strong\u003e module: a dual-core Xtensa LX7 at up to 240 MHz, 512 KB of SRAM, 8 MB of flash and 8 MB of PSRAM, with 2.4 GHz Wi-Fi 4 and Bluetooth 5 LE. Next to the module sits an NXP \u003cstrong\u003eTJA1441A\u003c\/strong\u003e high-speed CAN transceiver wired to the ESP32-S3's TWAI controller, so one board is both a CAN node and a wireless device.\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eCAN_H and CAN_L come out on a three-pin \u003cstrong\u003e2.5 mm pluggable terminal block\u003c\/strong\u003e, and the plug is in the package. A \u003cstrong\u003e120 Ω termination\u003c\/strong\u003e resistor is connected by default; cut JP3 to remove it. The transceiver covers CAN and CAN FD up to 5 Mbit\/s on the physical layer (ISO 11898-2:2016), with TX on GPIO5 and RX on GPIO4. It needs 4.5 to 5.5 V, which it takes from USB or from the VCC pin: on battery power alone the CAN side switches off on undervoltage while the ESP32-S3 keeps running. Power comes in over USB-C with a CH340K USB to UART bridge and automatic reset, through a TP4056M Li-ion charger (400 mA) with a JST battery connector, and a TPS7A26 3.3 V regulator.\u003c\/p\u003e \u003cp\u003e\u003cbr\u003e\u003c\/p\u003e \u003cp\u003eTwenty GPIO pins are broken out on two 13-pin 2.54 mm rows (headers included, unsoldered), so the board sits on a breadboard. The Qwiic connector shares the I2C bus (SDA GPIO8, SCL GPIO9) with 10 kΩ pull-ups you can disconnect at JP1. SPI is on GPIO10 to GPIO13, UART0 on GPIO43 and GPIO44, a WS2812B RGB LED on GPIO6 and the user button on GPIO0. You program it from the Arduino IDE through Espressif's ESP32 core, in MicroPython or in ESP-IDF, where the TWAI driver handles CAN.\u003c\/p\u003e","brand":"Soldered Electronics","offers":[{"title":"Default Title","offer_id":66433766883677,"sku":"333341","price":27.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0990\/5029\/1549\/files\/333341_photo_b3a48b.webp?v=1794379357","url":"https:\/\/soldered.com\/products\/soldered-nula-can-esp32-s3","provider":"Soldered Electronics","version":"1.0","type":"link"}