{"product_id":"soldered-pressure-temperature-sensor-bmp585-breakout","title":"Soldered Pressure \u0026 Temperature Sensor BMP585 breakout","description":"\u003cp\u003eThe Pressure \u0026amp; Temperature Sensor BMP585 Breakout carries Bosch Sensortec's BMP585, an absolute barometric pressure sensor that also measures temperature. Its relative accuracy is fine enough to tell which floor of a building you are on.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eThe BMP585 measures pressure from \u003cstrong\u003e30 to 125 kPa\u003c\/strong\u003e with \u003cstrong\u003e±6 Pa\u003c\/strong\u003e relative accuracy (700 to 1100 hPa, 15 to 55 °C) and \u003cstrong\u003e±30 Pa\u003c\/strong\u003e absolute accuracy (300 to 1100 hPa, -5 to 65 °C), and runs from \u003cstrong\u003e-40 to 85 °C\u003c\/strong\u003e. In NORMAL mode it outputs data at 0.125 to 240 Hz, and it has an IIR filter, a 32-sample FIFO and an interrupt pin. It draws \u003cstrong\u003e1.3 µA\u003c\/strong\u003e at 1 Hz and 0.55 µA in deep standby.\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cp\u003eYou connect over \u003cstrong\u003eI2C\u003c\/strong\u003e, either through the two Qwiic connectors or the 2.54 mm headers, which also break out INT, CSB and the address pin. The default address is \u003cstrong\u003e0x47\u003c\/strong\u003e; move the ADDRESS jumper to get \u003cstrong\u003e0x46\u003c\/strong\u003e. 10 kΩ pull-ups on SDA and SCL are enabled by default and can be cut off with a jumper. Soldered Arduino and MicroPython libraries are available.\u003c\/p\u003e","brand":"Soldered Electronics","offers":[{"title":"Default Title","offer_id":66336373342557,"sku":"333189","price":10.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0990\/5029\/1549\/files\/333189_photo_21820a.webp?v=1793356712","url":"https:\/\/soldered.com\/products\/soldered-pressure-temperature-sensor-bmp585-breakout","provider":"Soldered Electronics","version":"1.0","type":"link"}