Shop

easyC is a system developed by Soldered to establish easy connections between different I2C devices: microcontrollers, sensors, actuators. Connecting is easy and fast with pre-assembled cables. This connector is located on every easyC-compatible product.

Set of cables that are used for connecting to the breadboard. The set contains 65 cables that are in different colors and lengths for easier recognition on the breadboard.

If you’re looking for a microcontroller simple-to-use, yet powerful enough for a wide variety of applications, look no further from our connectplus. From low-power sensor networks to demanding tasks such as streaming music, MP3 encoding, and voice recording, this microcontroller can do it all. Dasduino CONNECTPLUS comes with integrated Wi-Fi and Bluetooth 4.2, which enable low-energy secure connections with data packet length extensions. It uses the powerful ESP32 controller with 4 MB integrated flash and 8 MB integrated PSRAM.

Dasduino CONNECTPLUS is 69 mm wide and 26 mm high. It fits on a standard breadboard for faster prototyping and works for most projects. It offers plenty of external connections with its 30 pins.You can simply connect the board to your computer with the standard USB Type-C cable and program it with Arduino IDE. The easyC port lets you connect the CONNECTPLUS easily with other I2C devices. The JST battery connector and onboard charger lets you make your projects truly wireless. There is more: full RGB WS2812 LED, reset and user button, onboard protections and more. It comes with USB-C cable.

Dasduino CONNECTPLUS (ESP32) options:

The Dasduino CONNECTPLUS comes in 3 versions depending on the method of establishing a connection to the pins:

– without headers
– with male headers
– with female headers

This is a pretty ordinary signal diode 1N4148. It is used for signals up to 200mA of current.

JST (more precisely JST XH) connectors are today the most common connectors for rechargeable lithium batteries but are also used for many other applications where a fast, easy and convenient connection is required.

• Exact name: JST XH 2pin
• Mounting method: cable
• The distance between pins: 2.00mm
• Female connector

Potentiometer of variable resistance of 10k which can be used on an experimental board, but it can also be installed in the housing. They can be used for various types of control, eg. Setting how the brightness of LEDs.

A through-hole holder for CR2032 3V battery which you can find on watches,  RTCs, toys, motherboard and other electronics.

BR2032 batteries are also suitable for this holder, but we do have one more battery type for you – CR2032 battery.

Male header at 90 degrees angle and pin spacing 2.54mm (0.1 ‘). 40-pin.

Comes in a pack of 5 pieces.

Set of male-female cables for connecting to various modules and components. You simply connect the module to the breadboard. It contains 40 cables of different colors, wire length is 15cm.

• Quantity: 40 cables
• Cable length: 15cm
• different colors for easier recognition

5mm RGB LED diode in through-hole version with 4 pins. Each of those represents one color (-), while longest pin is common anode(common +) for all three colors.

• Voltage: 3.4V for blue and green, 2.3V for red
• Current: 20mA per color, total max. 60mA
• Diode size: 5mm, diffused
• Light angle: 25 degrees

HC-SR04 is a widely used and popular sensor that can be used for measuring the distance between itself and the object that is placed in front of the sensor. Connecting to Dasduino itself is simple, the sensor requires only two codes for controlling and uses 5V voltage. There is also a library that provides us with distance information. Make sure you check „How to use module“ in the TUTORIALS category.

We all know these Mini DC motors, especially if you ever took apart any kind of toy. They’re everywhere, now and on Soldered as well. You can use it to make something useful or just reminisce about the times when you were younger.

Screw terminal for PCB with the legs width of 5mm with 2 contacts.

MOSFET N-channel transistor, with its characteristics, fits great with Dasduino/Arduino. With this transistor, you can control devices that need a great amount of current or great voltages through microcontrollers.

This transistor is also in our Croduino for beginners set.

Classic capacitor 0603 1uF 16V, tolerance 10%.

It comes in a pack of 50 pieces.

This small water pump is extremely easy to use. Dip it into the water or liquid you want to pump, plug the drain hose and connect it to the power supply. It works at 3V to 6V voltage and is capable of expelling 120L per hour. Great to serve as a small water pump!

• Voltage: 3V – 6V
• Max. liquid ejecting height: 40-110cm
• Flow speed: 120L/h
• Exterior diameter of drain tube: 7.5mm
• Interior diameter of drain tube: 4.7mm
• Pump dimensions: 24mm(diameter), 33mm(height)

In a buzzer speaker, current is run through a coil of wire that produces a magnetic field. The flexible ferromagnetic disc is attracted to the coil when current is flowing through it and returns to a “rest” position when current is not flowing through the coil. The sound from the buzzer speaker is produced by moving a ferromagnetic disc in a similar way to a cone in a speaker.

If you’re like us, the first time you saw an e-reader, you thought to yourself, “I could do something with that.”. Thanks to clean lines, high contrast, daylight readability, and the remarkable level of energy efficiency that comes from drawing power only when changing the screen’s contents, the e-paper is uniquely suited to many applications. Following Inkplate 6 success, with Inkplate 10 we continue to make e-paper accessible to hobbyists and DIY product designers by offering a plug-and-play hardware platform that is super-easy to use and compatible with Arduino.

To name a few features, Inkplate 10 has a stunning 9.7″ inch e-paper display with refresh rate of 1.61s, greyscale mode, and partial updates support. Powered by ESP32, you will have a strong microcontroller with WiFi and Bluetooth at your disposal. It’s super-low-power (22uA) so you can use it for days, weeks, or months out of a single battery charge. There’s Li-ion battery charger, Real Time Clock (RTC), additional GPIO pins, and more. Using our Arduino library (100% compatible with Adafruit GFX), it’s 5 minute work to get the board running for you. The Micropython module is available as well. It’s 100% open-source for both software and hardware. What is especially interesting is that Inkplate uses recycled screens taken from old e-book readers, which is very environmentally friendly, but you have to keep in mind that some screens may have small scratches because of this. All screens with large scratches and damages are not used at all.

Inkplate 10 options:

With e-paper display & enclosure: This version offers a sturdy and sleek enclosure for your device, made with precision from a 3D printer. It’s perfect for those who want an extra layer of protection without any added features.

With e-paper display, enclosure, and battery: Upgrade to this version if you’re looking for both protection and mobility. This option includes a 3D-printed enclosure as well as an integrated battery, ensuring your device stays powered even on the go.

Without e-paper display: For those who prefer a simpler or alternative display solution, this version does not include the e-paper display. It’s ideal for users who have their own display solutions or prefer to use the device without a visual interface.

Choose the one that best fits your needs and enhance your experience!

This module lowers the input voltage on the specified output voltage that you adjust through the trimmer on the board. It’s very practical because while changing the input voltage, the output voltage always stays the same. However, the input voltage has to be at least 0.7V higher than the output voltage.

Input voltage is IN+ and IN-, while the output is OUT+ and OUT- . A power supply is able only to bring the voltage down, not up!

It does not have a protective diode in case of the wrong polarity, pay attention while connecting!

These magnetic door switch sensors are already seen, if not – then in old movies for sure where they were used as anti-theft devices, ie. alarm systems. In fact, it is a magnet and the reed switch inside a pair. When they are close to each other (recommended 13mm or less), reed switch closes. Connect it to Croduino / Arduino as an ordinary switch use the detection of open doors, windows, drawers, cupboards etc.

• Voltage: max. 200V, best used 5V Croduino/Arduino
• Max reed power: 100mA
• Max detection distance: 15mm, 13mm recommended
• Dimensions: 29 x 14 x 9mm
• Cable length: 30cm

A breadboard is a piece of equipment that anyone who works with electronics must have. It enables connecting components and modules without soldering and in that way provides simpler testing, prototyping and learning.

If you are looking for an easy way to get started with soldering or simply want to make a small portable gadget, this set is a great opportunity. “LED cube” is an educational set for learning the soldering skill, with which you get a small electronic game at the end. After you turn on and shake this board, certain leds will light up randomly and symbolize the number, as if a real die had been thrown.

It is based on the Attiny404 microcontroller, programmed in Arduino, and there is a battery on the back which makes this gadget portable. There is also a keychain so you can always carry your new game with you! Soldering is easy according to the markings on the board.

The kit consists of:

• PCB
• Attiny404 microcontroller
• 7 LEDs
• 7 330ohm resistors
• 1 10kohm resistor
• Battery holder
• CR2032 battery
• Switch
• Vibration sensor SW-18020P
• Keychain ring

Classic capacitor 0603 100nF 50V, tolerance 10%. Most often used as a decoupling capacitor.
It comes in a pack of 50 pieces.

A PCB screw terminal with a lead width of 3.5mm, three contacts.

• Number of contacts: 3
• Distance between contacts: 3.5mm