Shop

High-quality spare probes for a multimeter.

If the soldering iron isn’t clean, neither will the the solder joint. This cleaning net allows quick tip cleaning by “stabbing” the soldering iron in it. When the net is filled with solder, simply remove it from the casing, clean the excess solder, return it back and use it again!

Ordinary panel switch (pushbutton). Comes in various colors.

All real machines have an emergency stop button when pressed the whole machine stops. It can be very useful in case of the danger of someone working on that machine. If you want to install a similar thing on your project, here it is!

• Type: DPST
• Maximal voltage: 660V
• Maximal current: 10A
• Button diameter: 40mm
• Mounting hole diameter: 22mm
• Dimensions: 60 x 70mm

443MHz RF is an accessible and affordable standard for RF communication between two devices (e.g. two Dasduino boards or between a remote controller and Dasduino with receiver) often used for remote control, wireless communication and data transmission. With this remote, commands are sent at 433MHz frequency and it’s able to send 4 different commands in total.

443MHz RF is an accessible and affordable standard for RF communication between two devices (e.g. two Dasduino boards or between a remote controller and Dasduino with receiver) often used for remote control, wireless communication and data transmission. This combination allows you to communicate with a remote control that has four buttons with one receiver.

Female header with 2.54mm (0.1 ”) classic pin spacing.

• Distance between pins: 2.54mm(0.1”)
• Number of pins: 8

To pick up ultra-small components and put them in the right place you simply have to own a right tool. One such are the tweezers for SMD components which will enable you to handle 0603 components. With little more exercise even smaller ones, won’t be an issue. Of course, the tweezers are ESD safe so you shouldn’t worry that something will happen to your components.

The SMD components are very small and the tweezers help us to do the job properly. And what should we do when we are having larger components, such as integrated circuits that can be so large that we can not grab them with tweezers? SMD vacuum tweezer will help us here. It uses a vacuum to grab the surface of IC. The vacuum is activated by pressing a small button, so using this tool won’t be a problem. It comes with several tips for different integrated circuits.

This interesting product enables you to control who has is allowed to turn on or turn off a circuit. Namely, in order to change the status of this switch, you need to put the key in the lock and turn it around.

The water level sensor allows you to detect the height of water or some other liquid in the tank. This float sensor works on the principle of magnets and magnetic (reed) switches. Usually, it is mounted on the bottom or top of the tank, and when in water, the floating part with a magnet, triggers the magnetic switch. This alteration can be detected and trigger a certain action; eg filling the tank or launch alert.