Shop

This is a huge roll of soldering wire. It’s a copper-plated stranded wire that comes in a thickness of 30AWG. Ideal for connecting to a protoboard or inside a project box. If you decide to buy this roll, you’ve probably solved the wire problem for at least 10 years!

• Thickness: 30AWG (0.255mm cross-section)
• Lenght: 250m
• Wire color: crvena, žuta, plava, crna ili bijela
• Stranded copper-plated wire

The digital voltmeter and ammeter measures and indicates current and voltage in 7-segment digits! You can connect it to your power source to see your real-time characteristics or a consumer cost to check its consumption at any time. It measures voltages up to 100V and current up to 10A (shunt resistor embedded). This device is intended for installation in a housing.

Do you want to measure a higher current? Not a problem! The device comes with a cable to connect an additional external shunt resistor that will allow you to measure even higher currents. Shunt resistors can also be found in our store.

Every real fan of electronics loves to have things that he knows will be needed in the future. The first and the most basic thing is a set of resistors, but immediately after, there are capacitors. The amount of times the whole project wouldn’t work just cause of one capacitor is too high! This set comes with a total of 120 electrolytic capacitors, with different voltages and capacities.

Panel pushbuttons may look ordinary but may look good as well, as this metal pushbutton with backlight. This pushbutton is waterproof, shock-proof and vandal-proof. Also comes with a backlight in a variety of colors.

Panel pushbuttons may look ordinary but may look good as well, as this metal pushbutton with backlight. This pushbutton is waterproof, shock-proof and vandal-proof. Also comes with a backlight in a variety of colors.

Panel pushbuttons may look ordinary but may look good as well, as this metal pushbutton with backlight. This pushbutton is waterproof, shock-proof and vandal-proof. Also comes with a backlight in a variety of colors.

Panel pushbuttons may look ordinary but may look good as well, as this metal pushbutton with backlight. This pushbutton is waterproof, shock-proof and vandal-proof. Also comes with a backlight in a variety of colors.

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

• The color of symbols: orange
• Backlight: black
• Dimensions: 80 x 36 x 12 mm
• Screen dimensions: 64.5 x 16 mm
• Voltage: 5V
• Comes with 16-pin flat, non-soldered male header.

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

• The color of symbols: yellow
• Backlight: black
• Dimensions: 80 x 36 x 12 mm
• Screen dimensions: 64.5 x 16 mm
• Voltage: 5V
• Comes with 16-pin flat, non-soldered male header.

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

• The color of symbols: red
• Backlight: black
• Dimensions: 80 x 36 x 12 mm
• Screen dimensions: 64.5 x 16 mm
• Voltage: 5V
• Comes with 16-pin flat, non-soldered male header.

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.

• The color of symbols: white
• Backlight: black
• Dimensions: 80 x 36 x 12 mm
• Screen dimensions: 64.5 x 16 mm
• Voltage: 5V
• Comes with 16-pin flat, non-soldered male header.

Load cell is a small device that is able to weigh the load on it. Due to the load, it provides very small output voltages that need to be amplified (eg using op-amp or ADC with a built-in op-amp) to find the use for the module. It incorporates two invariable two variable resistors connected to the Wheatstone Bridge. This sensor is made from high-quality materials, so it does not get affected by high temperature or continous load. You need to connect it with the HX711 to read information with Croduino.

Load cell is a small device that is able to weigh the load on it. Due to the load, it provides very small output voltages that need to be amplified (eg using op-amp or ADC with a built-in op-amp) to find the use for the module. It incorporates two invariable two variable resistors connected to the Wheatstone Bridge. This sensor is made from high-quality materials, so it does not get affected by high temperature or continous load. You need to connect it with the HX711 to read information with Croduino.

Load cell is a small device that is able to weigh the load on it. Due to the load, it provides very small output voltages that need to be amplified (eg using op-amp or ADC with a built-in op-amp) to find the use for the module. It incorporates two invariable two variable resistors connected to the Wheatstone Bridge. This sensor is made from high-quality materials, so it does not get affected by high temperature or continous load. You need to connect it with the HX711 to read information with Croduino.

This small, practical, and portable USB soldering iron powered from PC, laptop, or portable batter is perfect for makers! It works over any USB port and the small tip makes it very precise.  The tip also warms up very quickly, so you can start soldering around 15 seconds after the ignition. Soldering iron comes with a bracket, small amount of solder and a stand.

Of course, be careful while working with soldering iron. Iron’s tip is at temperature is 300-400 degrees Celsius.

• Power: 8W
• Input voltage: 5V
• Length: 16cm

Small, industrial power supply inside the iron enclosure enables 230V AC conversion into a 5V DC with 6A maximum current (30W).

Once you learn how to solder, you notice that your soldering isn’t perfect. Desoldering pump is a tool that should be on the table of each maker/electronics engineer because it allows easy removal of excess solder, thus repairing short circuits or removing the components from the board. It works on the principle of “sucking in” the solder (liquid state) inside itself. It is completely safe to use.

The active GPS antenna allows you to get a better GPS signal reception to your device. The antenna comes with a 3m cable at the end of which is the classic SMA male connector. There is a magnet for easier installation at the bottom of the antenna.

• Connector: SMA male
• Frequency: 1575.42MHz
• Voltage: 3V-5V
• Current: 10mA max.
• Polarization: circular(RH)
• Amplification: 28dB
• Dimensions: 45mm x 39mm x 13mm

Infra-red (IR) diode emits light in the spectrum that the human eye can’t see. However, such a diode has its purpose. It is used in remote controllers that send information on wavelengths within the infrared spectrum, e.g. to change television programme. So all you need to create your own remote is one of these diodes and correct data which will be sent!

We all know what HDMI cable is and we offer it because it’s required to connect Raspberry Pi with an external monitor. This is a classic male-male HDMI cable.

Length: 1m

easyC is a system developed by Soldered to establish easy connections between different I2C devices: microcontrollers, sensors, actuators. Connecting is easy and fast with pre-assembled cables. This connector is located on every easyC-compatible product.