🚚 Free delivery on orders over: €35 Croatia • €60 EU • $100 US

Shop

24/7 free customer and technical support

Comprehensive documentation

Open-source hardware and software

2-year Warranty - no questions asked

Sort by:
Screw terminal 5mm - 2 contacts
Screw terminal 5mm - 2 contacts

Screw terminal for PCB with the legs width of 5mm with 2 contacts.

 

Graphic LCD display 128x64 blue
Graphic LCD display 128x64 blue

LCD display with one ST7920 controller displays text, symbols or any other characters that are a product of Croduino/Arduino. With an ability to display 128 characters in 64 rows, it will find its usage in many projects that are required to show clear and readable output information.

 

Mini breadboard
Mini breadboard

Mini breadboard for beginners or for fast prototyping.

The colors on offer are green, blue, red, white and black. We send them out randomly so you could get any of them. If you prefer a specific one, leave a message with your order letting us know which one and we’ll try to fulfill your wish. 🙂

LCD display 20x4 blue/white
LCD display 20x4 blue/white

LCD display with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 20 symbols in four lines and therefore can be used in many projects that need to send clearly visible and legible output information.

Laser 650nm(red) 5mW 3V
Laser 650nm(red) 5mW 3V

This little laser is capable of showing a small dot on a great distance. You can use it, for example, in combination with a photoresistor to register when somebody has passed through a certain space.

 

• Wavelength: 650nm (red color)
• Power: 5mW
• Voltage: 3V

Stepper motor driver ULN2003
Stepper motor driver ULN2003

This driver for stepper motor enables control over a stepper motor that does not require more than 500mA of current and works at 5V-12V voltage. Except for the driver, it has built-in LED lights that indicate which phase of the motor is currently active. Connecting on Croduino/Arduino is simple, and control is directly through the library.

 

DHT11 temperature and humidity sensor
DHT11 temperature and humidity sensor

DHT11 is the simplest temperature and humidity sensor that can find. It connects to Dasduino in a very simple way using just one code (video below) and gives you back two variables as temperature and humidity.

It does not require extra calibration to work, just plug it in and use it. Look up the library for it in the TUTORIAL section.

Female DC connector
Female DC connector

A female connection that is usually found on our power supplies. For use with our controllers and amplifiers.

 

Addressable RGB LED strip ws2812 30LED/m 5V IP20
Addressable RGB LED strip ws2812 30LED/m 5V IP20

This kind of LED strip is unique because each of its diodes has a built-in IC which is able to turn on an LED in 16 000 000 different colors. IC is WS2812 and can control a thousand of these diodes by using just one wire. With this strip, you can create interesting things with minimum effort. This strip is easily controllable by Dasduino.

 

 

USB mini-B cable 0.5m
USB mini-B cable 0.5m

USB, 0.5m long, mini-B type cable (just like the connection on the Croduino Basic2) – actually it is the same as the one that comes with Basic2 board. It is not a micro-USB so it does not fit to smartphones.

 

LM317 adjustable voltage regulator
LM317 adjustable voltage regulator

LM317 is one of the most commonly used adjustable voltage regulators. Its voltage is adjustable from 1.7 to 37V, and all that while using 1.5A.

Generic NPN transistor TO-92
Generic NPN transistor TO-92

2N2222 is the most basic NPN transistor that you can find and it can be found in our Dasduino Beginner Kit. It can be used for amplifying Dasduino’s current, as a switch or anything else that you would like to do with the BJT transistor.

Coming soon Resistor kit 400
Resistor kit 400

How many times were You working on a project and You were missing that one resistor of a certain value? Set of resistors is something that will certainly come in handy to anyone who works with electronics. It offers 20 different resistors whose combinations can give us almost any necessary resistance. Each value comes in 20 samples, all packed up in a practical pocketbook. It even has 0 ohm resistors!

 

20 values x 20 pcs = 400 pcs of resistors
• Practical packaging 

Dasduino Beginner Kit - Basic
Dasduino Beginner Kit - Basic

Dasduino set for beginners is a complete system for learning programming and basic electronic principles. Using this set You will be able to program the world and electronic devices around You and learn how to program Dasduino in C programming language, connect electronic components and basic things about them. No experience in programming or electronics is needed to work with this set. In the beginning, Croduino lessons help where through 20 mins videos basic concepts of programming and electronics are explained.

 

Because of the poor choice of microcontroller boards in Croatia, a great quantity of educational material linked to this kit and low prices, the kit is a great choice for classrooms, companies and even colleges. With the minimal price, it brings all that is needed to learn about electronics for the independent production of a project.

 

Kit consists of:

  • Dasduino CORE + USB cable
  • Breadboard cables
  • Breadboard
  • 15x 10k resistor
  • 25x 330ohm resistor
  • 2x 5mm RGB LED
  • 6x 5mm blue LED
  • 6x 5mm red LED
  • 6x 5mm yellow LED
  • 6x 5mm green LED
  • DHT11
  • 2x photoresistor
  • 3x Pushbutton
  • Buzzer
  • Mosfet IRF540
  • 3x 2N2222 transistor
  • Shift register 74HC595
  • 3x Potentiometer 10k
  • 3x 12mm pushbutton
Dasduino beginner kit HOBBY
Dasduino beginner kit HOBBY

Dasduino Beginner Kit is a complete system for learning how to code and getting familiar with the main principles of electronics. With this set, you’ll be able to code the world and different electronic gadgets around you. Moreover, you’ll learn how to code your Dasduino (Arduino compatible board) in C programming language, connect electronic components and other things of importance in the electronics world. The best thing about this kit is that no experience in coding or electronics is required to get started.

 

This kit is an amazing choice for not only beginners, but schools, businesses, hobbyists and even colleges because it offers everything that is necessary for a individual to learn about electronics through their own project, while being at an affordable price.

 

Hobby version of Dasduino Beginner Kit has much more components than the basic version of the kit. It contains additional components and other actuators and sensors.

 

This kit consists of:

  • Dasduino CORE + USB cable
  • Set of cables for breadboard
  • Breadboard
  • 15x 10K resistor
  • 25x 330ohm resistor
  • 2x 5mm RGB LED diode
  • 6x 5mm blue LED diode
  • 6x 5mm red LED diode
  • 6x 5mm yellow LED diode
  • 6x 5mm green LED diode
  • DHT
  • 3x Photoresistor
  • 6x Pushbutton
  • Buzzer
  • 3x MOSFET transistor IRF540
  • 3x 2N2222 transistor
  • Shift register 74HC595
  • 6x Potentiometer 10k
  • 3x Big pushbutton
  • Relay, 1-channel
  • LCD display 16×2
  • 3x 1N4148 diode
  • Ultrasonic distance sensor
  • Motion sensor HC-SR501

 

Dasduino Beginner Kit INTERNET OF THINGS - IoT
Dasduino Beginner Kit INTERNET OF THINGS - IoT

Croduino set for beginners Internet of Things (IoT CSP) is a complete set to start working with the Internet of things. Contains Dasduino CONNECT, microcontroller board with ESP8266 which can easily be programmed from the Arduino IDE. Connection to a PC is made directly using a USB cable. Besides the controller, the set has a bunch of different sensors and actuators, which are often used in projects related to the Internet.

 

Some of the projects that you can make using components from this set are: Weather page (using BMP180 sensor temperature and humidity, air quality sensor MQ135, LDR), the switch which is connected to the Internet (using 2-channel module with relay, MOSFET or servo motor) notification via the Internet (a motion sensor, photoresistor or other sensor), and so on. Turn on your imagination and make something else!

 

Kit consists of:

  • Dasduino CONNECT
  • 2-channel relay
  • DC motor
  • F-F cable set
  • Pressure & Temperature sensor BMP180
  • Servo motor – TowerPro SG90
  • PIR Movement sensor board
  • Air quality sensor MQ135 breakout
  • 10k resistors (15pcs)
  • 2x 2N2222 transistor
  • Photoresistor
  • 2x IRF540 MOSFET
  • DHT11 temperature & humidity sensor
  • Buzzer
Make your own Dasduino Solder Kit
Make your own Dasduino Solder Kit

If you’re looking for a simple way to start soldering or just want to make your own Dasduino, this soldering set is a great opportunity. “Make your own Dasduino CORE” is an educational set for learning the skill of soldering, with which you end up with a functional microcontroller board. As with the other SMD versions of the Dasduino CORE boards we offer, the possibilities are endless.

 

 

It is based on the ATmega328P microcontroller, and all SMD components are already soldered on the board. The set also includes a THT socket for the microcontroller, which simplifies the replacement of the microcontroller should it ever become necessary.

 

 

The set consists of:

  • PCB
  • 7 capacitors of 100nF
  • 4 capacitors of 2.2uF
  • 2 capacitors of 22pF
  • 5 resistors of 2.2kOhm
  • 5 resistors of 10kOhm
  • 3 resistors of 1kOhm
  • 1 resistor of 100kOhm
  • 1 resistor of 100Ohm
  • 1 JST battery connector
  • 1 purple LED
  • 1 white LED
  • 1 blue LED
  • 1 red LED
  • 1 orange LED
  • 1 socket for ATmega328P
  • 1 ATmega328P microcontroller
TDA7297 2x15W audio amplifier
TDA7297 2x15W audio amplifier

For those who do not want to waste time setting up the amplifier, we have made a module for you! TDA7397 located on this plate is a two-channel power amplifier with 15W per channel (with a peak of 25W!). There is also a potentiometer on the product to adjust the volume directly between channels.

KIP switch
KIP switch

SPDT (single-pole, dual-throw) is a simple switch that connects the centre contact to one of the other two contacts located on its housing.

 

Mini water pump
Mini water pump

This small water pump is extremely easy to use. Dip it into the water or liquid you want to pump, plug the drain hose and connect it to the power supply. It works at 3V to 6V voltage and is capable of expelling 120L per hour. Great to serve as a small water pump!

• Voltage: 3V – 6V
• Max. liquid ejecting height: 40-110cm
Flow speed: 120L/h
Exterior diameter of drain tube: 7.5mm
• Interior diameter of drain tube: 4.7mm
Pump dimensions: 24mm(diameter), 33mm(height)

USB-C to USB-A converter
USB-C to USB-A converter

USB Type C Female to USB type A Male Converter.

EXPERT tool kit
EXPERT tool kit

The EXPERT tool set is ideal for advanced repairs and electronics work. It contains all the necessary tools and materials for precise, efficient, and safe work. The set includes: a AC screwdriver tester, allen key, cutting pliers, soldering station with hot air, solder wires, desoldering pump, prototyping wires, PCB cutting knife, small pliers, tweezers set, screwdriver set, SMD vacuum tweezers, ESD antistatic bracelet, electrical tape, kapton tape, protoboards, liquid flux, flux soldering paste, cleaning net, desoldering wick, digital multimeter, auxiliary arm, isopropyl alcohol and alligator clips.

This set enables precise handling of more complex tasks in electronics work, with maximum safety and efficiency.

ADVANCED tool kit
ADVANCED tool kit

The ADVANCED tool set is ideal for more complex repairs and electronics work. It includes all the necessary tools and materials for precise and efficient work. The set contains: a AC screwdriver tester, allen key, cutting pliers, soldering iron, desoldering pump, wire, soldering iron stand, tweezers, digital multimeter, and black and red alligator clips.
This set enables easy handling of more demanding tasks in electronics work.

Coming soon BASIC tool kit
BASIC tool kit

The BASIC tool set is an ideal choice for basic electronics repairs and work. It includes all the necessary tools and materials to make repairs and maintenance easier. A full list of tools can be found below. The set includes a AC screwdriver tester, allen key, cutting pliers, soldering iron, desoldering pump, wire, and a soldering iron stand.

items per page

11 years in the industry

Customers in 80+ countries

20,000+ satisfied customers

250+ Soldered-designed products