Tools & Lab equipment

Standard M3 countersunk head screw.

The threaded insert is used to repair a damaged thread, for inserting into soft materials where it provides a permanent thread (eg. plastic).

Isopropyl alcohol is an alcohol of high purity which can be found in almost every workshop. It is useful for cleaning printed circuit boards, because it evaporates quickly and allows the removal of greasy deposits (such as traces of flux/paste) and dirt. It is also used in 3D printer cleaners and all other applications where cleanliness is important. NOTE: it also has antibacterial properties.

Banana connectors are a pretty standard type of connection inside electronic labs because they provide fast and firm connection.

Banana connectors are quite standard connectors in electronic labs because they allow fast and firm connection.

Banana connectors are a pretty standard type of connection inside electronic labs because they provide fast and firm connection.

• Diameter: 4mm
• Color: red
• Male connector

Banana connectors are a pretty standard type of connection inside electronic labs because they provide fast and firm connection.

• Diameter: 4mm
• Color: black
• Male connector

Aligator clips are practical for quick connections during prototyping/testing. You can solder any type of wires to these clips.

Aligator clips are practical for quick connections during prototyping/testing. You can solder any type of wires to these clips.

Waterproof box with non-transparent cover. The cover is detachable and is held by four Phillips screws. between the cover and the base, it is possible to place a rubber band that would achieve a waterproof of a box and a rubber band comes within a box. Box has four Phillips screws for mounting as shown on the pictures.

• Dimensions: 65 x 59 x 35 mm

The transparent cover is detachable and is held by four Phillips screws. Between the cover and the base, it is possible to place a rubber band that would waterproof the box (rubber band included). The transparent cover is convenient, because it allows you to see inside the box or can be used with light sensors/UV lights.

Waterproof box with non-transparent cover for projects. The cover is detachable on a snap mechanism it is not held by any screws. However the specs of the manufacturer we do not recommend this box to be used outside.

• Dimensions: 100 x 60 x 25 mm

Waterproof box with non-transparent cover for projects. The cover is detachable and is held by four Phillips screws. The box is waterproof and between the cover and the box, there can be placed a rubber band that would make the box safe from water.

• Dimensions: 115 x 90 x 55 mm

Waterproof box with transparent cover. The cover is detachable and is held by four Phillips screws. Between the cover and a box, it is possible to place a rubber band that would achieve the box to be waterproof, the rubber band comes within the box. A transparent cover is convenient because you can see inside or can be used with light sensors/UV rays.

• Dimensions: 158 x 90 x 60 mm

A set of heat shrinks that insulate the connections between the wires when heated.

The set consists of:

• • 60 heat shrinks 40 mm long, 2 mm in diameter
• • 30 heat shrinks 40 mm long, 3 mm in diameter
• • 16 heat shrinks 40 mm long, 4 mm in diameter
• • 16 heat shrinks 40 mm long, 5 mm in diameter
• • 16 heat shrinks 40 mm long, 6 mm in diameter
• • 10 heat shrinks 40 mm long, 9 mm in diameter
• • 8 heat shrinks 40 mm long, 10 mm in diameter
• • 8 heat shrinks 40 mm long, 11 mm in diameter

It is extremely easy to remove insulation and solder with this stranded copper wire. It will serve great in small projects and prototypes.

Aligator clips are practical for quick connections during prototyping/testing. You can solder any type of wires to these clips.

Aligator clips are practical for quick connections during prototyping/testing. You can solder any type of wires to these clips.

Waterproof box with non-transparent cover for projects. The cover is detachable and is held by four Phillips screws. The box is waterproof and in between the cover and the box you can place a rubber band to make the box even safer from water.

The soldering iron is an essential tool for anyone who does something with electronics. Although we enjoy using more expensive soldering irons, this one is affordable and does the job – it will come in handy as a first or spare soldering iron, and with its price, it is affordable to everyone. The process of soldering permanently connects two pieces of metal. In electronics it is the joints between wires, components and boards. Whatever you want to do, you’ll always need to solder something, especially if you’re going to fix electronics – you must have a soldering iron. This soldering iron has a power of 40W, which is quite enough for soldering and desoldering in most cases.

Threaded nut M3 (3mm) is ideal for combinations with other M3 screws and nuts for printed circuit boards. The part with the nut is 5mm long, and the threaded part (screw) is 5mm in length.

The nut is hexagonal, not rounded.

Threaded nut M3 (3mm) is ideal for combinations with other M3 screws and nuts for printed circuit boards. The part with the nut is 12mm long, and the threaded part (screw) is 10mm in length.

The nut is hexagonal, not rounded.

Classic solder for working with a hand soldering iron. Solder paste is in the center of the solder, which simultaneously cleans the surface on which its soldering and gives a better grip of solder.

Classic and simple cutting pliers for cutting off excess material after soldering. Those can also be used for wire cutting or insulation removing.