Shop

This lithium-ion battery is small, light and durable. Through standard JST 2mm female connector, it will yield 3.7V which will supply your projects for a whole day (and night!). Furthermore, the battery has an implemented protection system, which prevents high voltages ( prevents over-charging), undervoltage and short circuit. That way it protects the battery, increases its lifetime and protects you from possible accidents!

• Nominal voltage: 3.7V
• Capacity: 500mAh, 1.85Wh
• Dimensions: 5.7 x 19.7 x 47.1mm
• Standard JST-PH-2mm connector

DISCLAIMER: This battery has to be charged with a special charged that uses CC/CV principle. Li-ion batteries are dangerous! Read our tutorial (link in the top right corner) before use.

A new and more powerful Raspberry Pi 4 is here! The most famous little computer in the world that doesn’t need any introduction. The 87 x 58mm board features a 64-bit 4-core processor clocked at 1.5GHz, 8GB of RAM, WiFi and Bluetooth, Gigabit Ethernet, 2x HDMI output, 4 USB ports, an SD card slot for system sotrage and your data. One should not forget the well-known Raspberry Pi GPIO, which allows you to connect various accessories directly to the Raspberry Pi.

Are you repairing or developing electronic boards? This set of inductors is incredibly useful because you will never have to think again if you have that specific inductor. It consists of 52 different values each of which comes in an amount of 50 pieces.

• Package: 0603
• 25 pcs of 52 values = 1300 pcs
• Values [H]:

1nH,    10nH,  100nH, 1uH,    10uH
1.2nH, 12nH,  120nH, 1.2uH, 12uH
1.5nH, 15nH,  150nH, 1.5uH, 15uH
1.8nH, 18nH,  180nH, 1.8uH, 22uH
2.2nH, 22nH,  220nH, 2.2uH,
2.7nH, 27nH,  270nH, 2.7uH,
3.3nH, 33nH,  330nH, 3.3uH,
3.9nH, 39nH,  390nH, 3.9uH,
4.7nH, 47nH,  470nH, 4.7uH,
5.6nH, 56nH,  560nH, 5.6uH,
6.8nH, 68nH,  680nH, 6.8uH,
8.2nH, 82nH,  820nH, 8.2uH,

Are you repairing or developing electronic boards? This This 0402 SMD resistor set is incredibly useful because you will never have to think again if you have that specific resistor. It consists of 170 different values each of which comes in an amount of 50 pieces. The resistors are manufactured by YAEGO, 1% tolerance and 0402.

• Package: 0402
• Tolerance: 1%
• 50 pcs of 170 values = 8500 pcs
• Resistance values[ohm]:

0, 1, 10, 100, 1K, 10K, 100K, 1M, 10M
1.1, 11, 110, 1.1K, 11K, 110K, 1.1M
1.2, 12, 120, 1.2K, 12K, 120K, 1.2M
1.3. 13, 130, 1.3K, 13K, 130K, 1.3M
1.5, 15, 150, 1.5K, 15K, 150K, 1.5M
1.6, 16, 160, 1.6K, 16K, 160K, 1.6M
1.8, 18, 180, 1.8K, 18K, 180K, 1.8M
2, 20, 200, 2K, 20K, 200K, 2M
2.2, 22, 220, 2.2K, 22K, 220K, 2.2M
2.4, 24, 240, 2.4K, 24K, 240K, 2.4M
2.7, 27, 270, 2.7K, 27K, 270K, 2.7M
3, 30, 300, 3K, 30K, 300K, 3M
3.3, 33, 330, 3.3K, 33K, 330K, 3.3M
3.6, 36, 360, 3.6K, 36K, 360K, 3.6M
3.9, 39, 390, 3.9K, 39K, 390K, 3.9M
4.3, 43, 430, 4.3K, 43K, 430K, 4.3M
4.7, 47, 470, 4.7K, 47K, 470K, 4.7M
5.1, 51, 510, 5.1K, 51K, 510K, 5.1M
5.6, 56, 560, 5.6K, 56K, 560K, 5.6M
6.2, 62, 620, 6.2K, 62K, 620K, 6.2M
6.8, 68, 680, 6.8K, 68K, 680K, 6.8M
7.5, 75, 750, 7.5K, 75K, 750K, 7.5M
8.2, 82, 820, 8.2K, 82K, 820K, 8.2M
9.1, 91, 910,. 9.1K. 91K, 910K

Copper board used for making your own PCBs.

• Number of layers: 2
• Material: FR1
• Copper thickness: 35um
• Dimensions: 160 x 100 mm

This antenna is designed for LoRa modules based on 868MHz frequency (Europe).

• Frequency range: 868MHz (Europe)
• Impedance: 50ohm
• Lenght: 79mm
• Connector type: SMA male

This antenna is designed for LoRa modules based on 868MHz frequency (Europe). It is soldered on a hole in PCBs and has a significantly better sensitivity compared to ordinary wire.

• Frequency range: 868MHz
• Impedance: 50ohm
• Diameter: 5mm
• Lenght (spiral): 14mm

The TowerPro MG995 is a digital servo motor known for its metal gear construction and torque, making it a component for a wide array of robotics, RC, and automation projects. Engineered for durability and precision, this servo delivers consistent and reliable movement, crucial for applications demanding accuracy and strength. Its ability to handle loads, combined with a fast response time, positions it as a choice over standard plastic alternatives, ensuring longevity and performance in challenging environments.

Compatible with Arduino and other popular microcontrollers, the MG995 simplifies integration into electronic projects. Hobbyists and professional engineers can leverage its control interface to achieve precise angular positioning or continuous rotation, depending on the application. Whether you’re building a robotic arm, a remote-controlled vehicle, or an automated camera platform, the MG995 provides the power and control necessary to bring designs to life with ease and efficiency.

What sets the TowerPro MG995 apart is its balance of power, reliability, and affordability. Its metal gears minimise wear and tear, extending the lifespan of the servo even under heavy use, while the dual ball bearing design ensures smooth operation and reduced friction. This combination of features makes the MG995 a cost-effective and high-quality solution for educational projects, DIY enthusiasts, and industrial prototypes, offering value for its performance class. Choose the MG995 for a powerful, precise, and dependable servo experience.

• RPM: 0.20s/60 degrees (4.8V), 0.16s/60 degrees (6V)
• Voltage: 4.8V – 6.6V
• Torque: 9.4kg/cm (4.8V) – 11kg/cm (6V)
• Angle: 180 degrees
• Dimensions: 40mm x 20mm x 43mm
• Weight: 55g

This adapter can switches your MicroUSB cabel into an USB-C.

• Front: MicroUSB
• Back: USB-C

Small motion sensor HC-SR505 detects movement in its environment and it is based on infrared technology. It easily connects with Croduino/Arduino via digital pins. When it detects movement, digital output pin sets to HIGH (3.3V, analog 675).

• Model: HC-SR505
• Voltage: 4.5V – 20V DC
• Detection angle: <100 degrees
• Detection range: 3m
• Dimensions: 40 x 10 x 11mm

This module lowers the input voltage to a specific output voltage which you adjust via a trimmer on the board. It is very practical because by changing the input voltage, the output always remains the same. It converts voltages with high efficiency, significantly higher than standard voltage regulators.

• Input Voltage: 4.5V – 28V
• Output Voltage: 0.8V – 20V
• Max. current on the output: 3A
• Efficiency: do 96%
• Dimensions: 22 x 17 x 4 mm
• Current Peak: 4A
• Frequency: 100kHz do 1.5MHz

There is no protection diode in case of wrong polarity, be careful when connecting!

This built-in switch comes in a metal case and comes with backlighting in various colors. In addition, this switch is waterproof, shockproof and vandal-proof.

This built-in switch comes in a metal case and comes with backlighting in various colors. In addition, this switch is waterproof, shockproof and vandal-proof.

This built-in switch comes in a metal case and comes with backlighting in various colors. In addition, this switch is waterproof, shockproof and vandal-proof.

This built-in switch comes in a metal case and comes with backlighting in various colors. In addition, this switch is waterproof, shockproof and vandal-proof.

This adapter will turn your Micro HDMI into an HDMI connector. On one side there is a male Micro HDMI and on the opposite side is a female HDMI connector .

This adapter will turn your HDMI into an VGA connector. On one side there is a male HDMI and on the opposite side is a female VGA connector.