Shop

The LSM6DSO32 sensor breakout is a compact and versatile sensor module designed to provide precise motion sensing capabilities for various applications. It is based on the LSM6DSO32, a high-performance 6-axis Inertial Measurement Unit (IMU) manufactured by STMicroelectronics.

The breakout board features a tiny yet powerful chip that combines a 3-axis accelerometer and a 3-axis gyroscope, allowing it to measure linear acceleration and angular rate in three dimensions. This makes it an ideal choice for projects that require motion tracking, orientation detection, gesture recognition, and activity monitoring.

One of the key advantages of the LSM6DSO32 sensor breakout is its low power consumption, making it suitable for battery-powered applications, such as wearables, IoT devices, and remote sensing systems. Additionally, the breakout board offers flexibility and ease of use with its I2C and SPI communication interfaces, allowing seamless integration with a wide range of microcontrollers and development platforms.

This breakout board comes with 2 easyC connectors which will simplify connection with microcontrollers. By using the easyC module connection system, forget about incorrectly connected or, in the worst case, damaged modules.

A PIR (passive infrared) motion sensor is a device that detects physical movement within its field of vision by sensing changes in infrared radiation. This sensor works on the principle of detecting thermal thermal signals emitted by objects, mostly warm-blooded creatures like humans. The “passive” in the name refers to the fact that the sensor itself does not emit or radiate any energy for detection.

When it detects motion, the sensor sends a digital signal to the microcontroller. The angle that the sensor “sees” is 100 degrees and reaches up to 5 meters. It is often used in a variety of applications, including home security systems, automatic lighting, and energy management, among others.

Our breakout board simplifies the use of the PIR sensor by using easyC technology, making it easily connectable with microcontrollers or other circuits. It accepts input from the PIR sensor and translates it into signals that your microcontroller can interpret. In addition to the aforementioned PIR sensor, the board also contains a small ATTiny404 microcontroller, as well as a switch for selecting the I2C address. This breakout board comes with 2 easyC connectors for easy integration into the easyC system. If you do not wish to use easyC, the module can also be used via standard headers.

If you have a device you want to connect to a WiFi network, by using an IPX connector, all you need is this antenna. Use the IPX connector to establish connection with your device and it is ready to connect to a 2.4GHz WiFi network.

If you’ve ever wanted to make something with a stepper motor, this is a great place to start. A stepper motor is a type of motor that can control its revolutions very precisely, so it is used for precise control and positioning.

This set comes with a small stepper motor and a driver for it. Namely, the stepper motor needs to be controlled in an exact way in order to get what you want from it (which is a precise turn), so the driver helps us with that. Also, the driver provides enough current to turn the motor.

This stepper motor driver enables the control of a stepper motor that does not need more than 800mA of current and operates at a voltage of up to 14V. In addition to the driver, it also has built-in LEDs that indicate which phase of the motor is currently active.

Global Navigation Satellite Systems (GNSS), or as we all like to call it “GPS,” enable precise location determination on Earth. Thanks to this module, you can use GNSS for your project and employ the device for asset tracking or create a wearable device. The module is small, energy-efficient, highly effective, and easy to use thanks to its built-in antenna.

L86-M33 is a GNSS receiver, meaning it can receive signals from GPS, GLONASS, and Galileo constellations. Equipped with EASY (Embedded Assist System for self-generated orbit prediction) and AlwaysLocate technologies, the L86-M33 ensures fast and accurate positioning even in challenging environments. Its advanced internal logger, LOCUS, allows you to store your routes and location data.

In addition to the aforementioned L86-M33 module, which has an integrated antenna, our breakout board also has a connector for a CR1220 battery that is used as a backup for timekeeping and GPS data. The module can operate without a battery, but each time it will have to pull data from the satellites anew (cold start). If the integrated antenna is not sufficient, there is an IPX connector on the board for adding an external, stronger antenna. To easily access the pins of the module, the pins are exposed on the board for easy access.

High-quality power supply with 5V, 2.4A output. It will power up any type of USB device. There is a standard USB female connector (type-a) at the output.

This lithium-ion battery is small, light and durable. Through standard JST 2mm female connector, it will yield 3.7V which will supply your projects for a whole day (and night!). Furthermore, the battery has an implemented protection system, which prevents high voltages ( prevents over-charging), undervoltage and short circuit. That way it protects the battery, increases its lifetime and protects you from possible accidents!

DISCLAIMER: This battery has to be charged with a special charged that uses CC/CV principle. Li-ion batteries are dangerous! Read our tutorial (link in the top right corner) before use.

This lithium-ion battery is small, light and durable. Through standard JST 2mm female connector, it will yield 3.7V which will supply your projects for a whole day (and night!). Furthermore, the battery has an implemented protection system, which prevents high voltages ( prevents over-charging), undervoltage and short circuit. That way it protects the battery, increases its lifetime and protects you from possible accidents!

DISCLAIMER: This battery has to be charged with a special charged that uses CC/CV principle. Li-ion batteries are dangerous! Read our tutorial (link in the top right corner) before use.

This lithium-ion battery is small, light and durable. Through standard JST 2mm female connector, it will yield 3.7V which will supply your projects for a whole day (and night!). Furthermore, the battery has an implemented protection system, which prevents high voltages ( prevents over-charging), undervoltage and short circuit. That way it protects the battery, increases its lifetime and protects you from possible accidents!

DISCLAIMER: This battery has to be charged with a special charged that uses CC/CV principle. Li-ion batteries are dangerous! Read our tutorial (link in the top right corner) before use.

This lithium-ion battery is small, light and durable. Through standard JST 2mm female connector, it will yield 3.7V which will supply your projects with power for a whole day (and night!). Furthermore, the battery has an implemented protection system, which prevents high voltages ( prevents over-charging), undervoltage and short circuit. That way it protects the battery, increases its lifetime and protects you from possible accidents!

DISCLAIMER: This battery has to be charged with a special charger that uses CC/CV principle. Li-ion batteries are dangerous! Read our tutorial (link in the top right corner) before use.

If you’re like us, the first time you saw an e-reader, you thought to yourself, “I could do something with that.”. Thanks to clean lines, high contrast, daylight readability, and the remarkable level of energy efficiency that comes from drawing power only when changing the screen’s contents, the e-paper is uniquely suited to many applications. Following Inkplate 6 success, with Inkplate 10 we continue to make e-paper accessible to hobbyists and DIY product designers by offering a plug-and-play hardware platform that is super-easy to use and compatible with Arduino.

To name a few features, Inkplate 10 has a stunning 9.7″ inch e-paper display with refresh rate of 1.61s, greyscale mode, and partial updates support. Powered by ESP32, you will have a strong microcontroller with WiFi and Bluetooth at your disposal. It’s super-low-power (22uA) so you can use it for days, weeks, or months out of a single battery charge. There’s Li-ion battery charger, Real Time Clock (RTC), additional GPIO pins, and more. Using our Arduino library (100% compatible with Adafruit GFX), it’s 5 minute work to get the board running for you. The Micropython module is available as well. It’s 100% open-source for both software and hardware. What is especially interesting is that Inkplate uses recycled screens taken from old e-book readers, which is very environmentally friendly, but you have to keep in mind that some screens may have small scratches because of this. All screens with large scratches and damages are not used at all.

Inkplate 10 options:

With e-paper display & enclosure: This version offers a sturdy and sleek enclosure for your device, made with precision from a 3D printer. It’s perfect for those who want an extra layer of protection without any added features.

With e-paper display, enclosure, and battery: Upgrade to this version if you’re looking for both protection and mobility. This option includes a 3D-printed enclosure as well as an integrated battery, ensuring your device stays powered even on the go.

Without e-paper display: For those who prefer a simpler or alternative display solution, this version does not include the e-paper display. It’s ideal for users who have their own display solutions or prefer to use the device without a visual interface.

Choose the one that best fits your needs and enhance your experience!

If you’re like us, the first time you saw an e-reader, you thought to yourself, “I could do something with that.” Thanks to clean lines, high contrast, daylight readability, and the remarkable level of energy efficiency that comes from drawing power only when changing the contents of the screen, e-paper is uniquely suited to many applications. With Inkplate 6, our goal is to make e-paper accessible to hobbyists and DIY product designers by offering a plug-and-play hardware platform that is super-easy to use and compatible with Arduino.

To name a few features, Inkplate 6 has stunning 6 inch e-paper display with refresh rate of 1.26s, with partial update 264ms, greyscale mode and partial updates support. Powered by ESP32, you will have strong microcontroller with WiFi and Bluetooth on your disposal. It’s super-low-power (22uA) so you can use it for days, weeks, or months out of a single battery charge. Using our Arduino library (100% compatible with Adafruit GFX), it’s 5 minute work to get the board running for you. The Micropython module is available as well.  It’s 100% open-source for both software and hardware. What is especially interesting is that Inkplate uses recycled screens taken from old e-book readers, which is very environmentally friendly, but you have to keep in mind that some screens may have small scratches because of this. All screens with large scratches and damages are not used at all.

Inkplate 6 options:

With e-paper display & enclosure: This version offers a sturdy and sleek enclosure for your device, made with precision from a 3D printer. It’s perfect for those who want an extra layer of protection without any added features.

With e-paper display, enclosure, and battery: Upgrade to this version if you’re looking for both protection and mobility. This option includes a 3D-printed enclosure as well as an integrated battery, ensuring your device stays powered even on the go.

Without e-paper display: For those who prefer a simpler or alternative display solution, this version does not include the e-paper display. It’s ideal for users who have their own display solutions or prefer to use the device without a visual interface.

Choose the one that best fits your needs and enhance your experience!

The threaded insert is used to repair a damaged thread, for inserting into soft materials where it provides a permanent thread (eg. plastic).

SPDT (single-pole, dual-throw) is simple switch which connects central contact with one of the other two contacts located inside its housing.

High-quality USB-C male to classic USB-A male cable 300cm long, with all communication and power lines.

This Li-ion battery is small, light and durable! Trough standard JST 2mm female connector it will give you normal 3.7V that will power your projects whole day (and night). With all this battery has a built-in system for protection from too high voltage (prevents overcharging), too low voltage and short circuit. That’s how it protects the battery and secures its longer work and protects you from the danger of this battery!

Warning: This battery must be charged with special charger principle CC/CV – like the charger recommended under. Li-ion batteries are dangerous! Read our tutorial (link right above) before use.

LCD screen with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information.