Shop

This wireless charging receiver is fully compatible with the Qi standard, which means that it will provide a voltage at its output when its coil is close enough to another Qi-compatible coil. It can be one from our offer or any Qi-compatible charger. it gives 5V with a maximum current of 0.5A, and has an integrated protection against excessive temperature.

This Qi-compatible transmitter will wirelessly charge any Qi-compatible device.

Electrical tape is well known to everyone – it provides insulation between various connections. This is an extra-large, 30m roll. The color you receive will be randomly selected.

Spare oscilloscope probe.

A logic analyzer allows you to record and display a signal, usually a bus, on your computer screen in real time. It is powered via USB, and simultaneously records up to 8 channels. Cables are also included.

The biggest advantage of Dasduino Connect hides within its name. If you ever wanted to connect your development board directly to the Internet, look no further! This Dasduino comes with the ability to connect to Wi-Fi. It even comes with the TCP/IP protocol suite that supports DNS. Connecting the physical world with the Internet has never been easier! Dasduino Connect is based on the well-known ESP8266 microchip which can be a bit complicated to use on its own. Adding the fact that it works from the Arduino IDE, working this board is as simple as it gets.

Dasduino Connect is 71 mm wide and 26 mm high so you can fit it in most projects. It fits perfectly on a breadboard for faster prototyping. It has a total of 30 pins, most of which are digital and one of which is analog. You can simply connect it to your computer with a USB Type-C and program it in Arduino IDE. Connecting the Dasduino Connect with other boards is done with an easyC cable. The design is 3.3V ready with an onboard regulator for 5V. With the JST battery connector, you can make your projects truly wireless. It includes full RGB WS2812B LED as well. Comes without any headers although it comes with USB-C cable.

Dasduino CONNECT (ESP8266) options:

The Dasduino CONNECT comes in 3 versions depending on the method of establishing a connection to the pins:

– without headers
– with male headers
– with female headers

If you’re looking for a microcontroller simple-to-use, yet powerful enough for a wide variety of applications, look no further from our connectplus. From low-power sensor networks to demanding tasks such as streaming music, MP3 encoding, and voice recording, this microcontroller can do it all. Dasduino CONNECTPLUS comes with integrated Wi-Fi and Bluetooth 4.2, which enable low-energy secure connections with data packet length extensions. It uses the powerful ESP32 controller with 4 MB integrated flash and 8 MB integrated PSRAM.

Dasduino CONNECTPLUS is 69 mm wide and 26 mm high. It fits on a standard breadboard for faster prototyping and works for most projects. It offers plenty of external connections with its 30 pins.You can simply connect the board to your computer with the standard USB Type-C cable and program it with Arduino IDE. The easyC port lets you connect the CONNECTPLUS easily with other I2C devices. The JST battery connector and onboard charger lets you make your projects truly wireless. There is more: full RGB WS2812 LED, reset and user button, onboard protections and more. It comes with USB-C cable.

Dasduino CONNECTPLUS (ESP32) options:

The Dasduino CONNECTPLUS comes in 3 versions depending on the method of establishing a connection to the pins:

– without headers
– with male headers
– with female headers

Small, industrial power supply in the metal housing allows the conversion of 230V AC to 12V DC voltage of maximum current 5A, power 60W.

10mm diffused LED diodes are great stuff to play with. They can used in various beginner projects.

A classic small power supply with an output of 5V / 2A which will ideally supply any USB-powered device. The output is standard female USB connector (type A).

A solenoid is a special type of electromagnet on which it is possible to control the position of the shaft using currents.

Additional passive RFID tag for use with our RFID readers. In a plastic PVC case, waterproof, with 3M adhesive tape on one side.

Self-adhesive RFID tag comes in two variants, 125kHz or 13.56MHz.

NFC sticker (Near Field Communication) is a wireless communication system that succeeds RFID. This sticker contains a small NFC tag operating at 13.56 MHz, with 1 kB EEPROM memory that supports up to 100,000 write cycles.

It is based on the MIFARE Classic 1K chip, a widely used and reliable standard for contactless data storage and access applications.

LCD screen with HD44780 controller is able to display text, symbols, values or anything else coming from Dasduino/Arduino. It is capable of displaying 16 characters in 2 lines and is useful in many projects that need to send clearly visible and legible output information.

Zener diodes are a special type of semiconductor diode – devices that allow current to flow in one direction only, while also allowing current to flow in the opposite direction, but only when exposed to enough voltage. This set consists of 140 pieces of 14 different values, 10 pieces each.

The 7-segment display is a classic, often used and seen component. The size of the digits on this display is 0.56 inches, and the light it gives is white. The display has a common cathode.

The 7-segment display is a classic, often used and seen component. The size of the digits on this display is 0.56 inches, and the light it gives is white. The display has a common cathode.

The 7-segment display is a classic, often used and seen component. The size of the digits on this display is 0.56 inches, and the light it gives is white. The display has a common cathode.