Communication

This small and simple module gives us a translation of logic level between two signals. In layman’s terms, if we take a signal with logical “unit” on 5V convert into a signal which logical “unit” has on 3.3V this module will help us. Something like this is useful in this case if we want to achieve communication between two devices from whom one works on 5V and the other on 3.3V, or any other combination of voltages. Directly connecting we would “burn” a device that works on 3.3V and a module gives us to avoid that.

This board is specialized for signal conversion for I2C communication protocol, and for this conversion it uses a special integrated circuit that enables communication at high speeds.

• Max. voltage: 30V
• Number of channels: 4
• Communication protocol: I2C
• Dimensions: 22 x 22mm

This cabel switches your antenna with an SMA female connector to an N-type connector.

• Cable lenght: 1m

This antenna is designed for LoRa modules based on 868MHz frequency (Europe).

• Frequency range: 868MHz (Europe)
• Impedance: 50ohm
• Lenght: 79mm
• Connector type: SMA male

This antenna is designed for LoRa modules based on 868MHz frequency (Europe). It is soldered on a hole in PCBs and has a significantly better sensitivity compared to ordinary wire.

• Frequency range: 868MHz
• Impedance: 50ohm
• Diameter: 5mm
• Lenght (spiral): 14mm

WiFi antenna with standard SMA male connector for connecting to your PCBs.

• Connector: SMA male
• Impedance: 50 ohm
• Frequency: 2.4GHz
• Dimensions: 50.5 x 19 x 10mm

GSM PCB antenna with IPX connector for connection on your boards that use an IPX connector.

This antenna connects you to 4G/LTE network it connects on your device via an IPX connector.

• Frequency: 4GHz/LTE
• Dimensions: 40 x 15 x 0.25mm
• Cable lenght: 12cm

This product has IPX connectors on both ends they are gold color and its lenght is. Connects easily and has good connection.

• lenght: 10cm

If you have a device that you want to connect to WiFi and want to use an IPX connector, then all you need is this antenna. Simply connect it to the IPX connector and your device is ready to connect to your WiFi network. This product features 2.4G/5G connection.

If you have a device you want to connect to a WiFi network, by using an IPX connector, all you need is this antenna. Use the IPX connector to establish connection with your device and it is ready to connect to a 2.4GHz WiFi network.

Additional passive RFID tag for use with our RFID readers. It si practical as key ring.

RFID tag comes in two variants, 125kHz or 13.56MHz.

Universal IR (infrared) remote with 6 keys: ignition key, four direction keys, and center button. Although it is intended for something else, you will easily pair this IR remotely with an IR receiver in the Croduino / Arduino project and thus make it respond to your commands.

• Number of buttons: 21
• Battery: CR2025, comes with the remote
• Dimensions: 86 x 40 x 6.5mm

IPX to SMA female cable will allow you easy connection with SMA male antenna to IPX connector which is, for example, a common case with a GSM antenna.

easyC system is for easy connection of microcontroller plates, sensors and actuators, which enables rapid prototyping without the possibility of error. The connection between the modules takes place with simple and pre-prepared cables, and easyC modules have connectors that fit the cables. easyC is based on I2C communication.

easyC-compatible cables with easyC connectors on both ends, available in different lengths.

443MHz RF is an accessible and affordable standard for RF communication between two devices (e.g. two Dasduino boards or between a remote controller and Dasduino with receiver) often used for remote control, wireless communication and data transmission. With this remote, commands are sent at 433MHz frequency and it’s able to send 4 different commands in total.

443MHz RF is an accessible and affordable standard for RF communication between two devices (e.g. two Dasduino boards or between a remote controller and Dasduino with receiver) often used for remote control, wireless communication and data transmission. This combination allows you to communicate with a remote control that has four buttons with one receiver.

The active GPS antenna is the perfect solution for enhancing the GPS signal reception of your device. It features a 3-meter long cable with a standard SMA male connector, providing you with ample length for flexible installation. The antenna’s magnetic base allows for easy and secure mounting on any metal surface, making it ideal for a wide range of applications.

This high-performance antenna operates on a frequency of 1575.42MHz and offers a 28dB of amplification, ensuring a strong and stable GPS signal. With a voltage range of 3V-5V and a low current consumption of 10mA max, it is both efficient and versatile. Its circular (RH) polarization further enhances signal quality, providing you with reliable and accurate positioning data for your projects.

Whether you are building a vehicle tracking system, a drone, or any other project that requires precise GPS data, this active antenna is an excellent choice. Its compatibility with popular platforms like Arduino and Raspberry Pi makes it a go-to component for makers and hobbyists. The compact dimensions of 45mm x 39mm x 13mm allow for seamless integration into your setup.

• Connector: SMA male
• Frequency: 1575.42MHz
• Voltage: 3V-5V
• Current: 10mA max.
• Polarization: circular(RH)
• Amplification: 28dB
• Dimensions: 45mm x 39mm x 13mm

Infra-red (IR) diode emits light in the spectrum that the human eye can’t see. However, such a diode has its purpose. It is used in remote controllers that send information on wavelengths within the infrared spectrum, e.g. to change television programme. So all you need to create your own remote is one of these diodes and correct data which will be sent!

The IR receiver is a device that detects the modulated IR radiation emitted by the remote controls. The IRM-56384 detects IR radiation on a standard frequency of 38kHz and outputs signal to its output pin, which can be read with a microcontroller. Thus, it enables project management via the remote control.

RFID card is white and the size of standard credit card. We promise that it will fit into any standard wallet! Comes with random unique code.

RFID card comes in two variants, 125kHz or 13.56MHz.

This antenna is designed for 433MHz modules from our offer and improves their range even up to 300%. It works both as a receiver and as an emitter.

• Frequency range: 433MHz (+-6MHz)
• Amplification: 2.2dBi
• Impendance: 50ohm
• Maximum power: 30dBi

The ceramic antenna at a frequency of 1575.42MHz corresponding GPS. Ideal with our SIM808 breakout.

NRF24L01+ module enables wireless two-way communication between two Dasduinos. Its range is up to 100m outdoors. With some adjustments of the antenna, the range can be larger.