Shop

Introducing the TPS613222A boost converter, the ideal solution for your power management needs! This compact and efficient boost converter is designed to provide a stable power supply for your low-voltage devices, ensuring they run smoothly and reliably. Whether you’re a hobbyist working on DIY electronics projects or a professional developing advanced applications, the TPS613222A boost converter offers the perfect blend of performance and simplicity.

The TPS613222A is a high-efficiency, synchronous boost converter that steps up input voltages from as low as 0.9V to output voltages up to 5.5V. This makes it perfect for battery-powered devices, including portable gadgets, wearables, and other low-power electronics. Its ultra-low quiescent current helps to extend battery life, making your devices more efficient and eco-friendly. There are quick terminals with springs on the board for even simpler and faster connection within the system.

How many times have you watered your plants and feared you overdid it? With the capacitive soil sensor, those worries are a thing of the past!

Most cheap soil sensors work on the resistance principle, where there are two prongs and the sensor measures the conductivity between them. They work fine at first, but eventually begin to oxidize due to the exposed metal. Even if they are gold plated! Due to oxidation, the resistance goes up and up, so you have to constantly recalibrate your code. Also, resistance measurements do not always work in loose soil.

This design with capacitive measurement is superior. Capacitive measurements use only one prong, have no exposed metal, and do not introduce direct current into your plants.

LCD display with HD44780 controller enables showing text, symbols, value or anything else that comes from Croduino/Arduino. It is capable of showing 16 symbols in two lines and therefore can be used in many projects that need to send clearly visible and legible output information. An I2C LCD adapter is soldered to this LCD screen, which enables characters to be displayed on the LCD screen via the I2C bus. It also has an easyC connector for a really simple connection.

A fork-shaped soil humidity sensor with gold-plated contacts which prevent oxidation. It has a soldered terminal for easier wire connection.

Dimensions: 54mm x 22mm x 0.45mm

The Dual Motor H-Bridge DRV8424P is a high-performance motor driver module that provides efficient and reliable control for two DC motors or a bipolar stepper motor. It is widely used in robotics, automation, and mechatronics projects where precise motor control is required.

This motor driver module is based on the DRV8424P integrated circuit, which features advanced protection and control capabilities. It supports a wide range of motor voltages, typically from 8V to 45V, and can deliver a continuous output current of up to 2.5A per motor channel. With a peak current of up to 4A, it can handle high-demand applications.

The LED matrix 8×8 is a system of 64 interconnected LEDs that, with the help of the MAX7219 LED driver, light up as programmed, and all of this is located on one board and is truly easy to use. You can use them to show letters or symbols, display text, and the like. It is possible to connect several modules with just a few wires and control several matrices at once.

The design of the modules is such that they will look like they are from one piece, even if you stack several of them one after the other. The LEDs on the board are beautiful 0402 very small LEDs and give a very nice effect when lit.

If you are looking for a simple way to learn soldering, or just want to make a small gadget that you can carry, this soldering kit is a great opportunity. Simon says game is an educational kit which teaches you how to solder, and in the end, you get to have your own small game. The goal of the game is to press the buttons in the same order as LED turn on. With every correct answer, the game gets a bit harder. How many correct answers can you get?

It’s based on Attiny404 microcontroller, programmed in Arduino. At its back, you’ll find CR2032 battery which makes the kit portable. There’s keychain holder as well. Soldering process is easy enough based on the mark on the PCB.

The kit consists of:
• PCB
• Attiny404 microcontroller
• 4 LEDs
• 4 Pushbuttons
• A switch
• 4 resistors 330ohm
• CR2032 battery holder
• Battery CR2032
• Keychain holder

If you are looking for an easy way to get started with soldering or simply want to make a small portable gadget, this set is a great opportunity. “LED cube” is an educational set for learning the soldering skill, with which you get a small electronic game at the end. After you turn on and shake this board, certain leds will light up randomly and symbolize the number, as if a real die had been thrown.

It is based on the Attiny404 microcontroller, programmed in Arduino, and there is a battery on the back which makes this gadget portable. There is also a keychain so you can always carry your new game with you! Soldering is easy according to the markings on the board.

The kit consists of:

• PCB
• Attiny404 microcontroller
• 7 LEDs
• 7 330ohm resistors
• 1 10kohm resistor
• Battery holder
• CR2032 battery
• Switch
• Vibration sensor SW-18020P
• Keychain ring

If you are looking for a simple way to learn soldering, or just want to make a small gadget that you can carry, this set is a great opportunity. Reaction game is an educational kit which teaches you how to solder, and in the end, you get to have your own small game. The goal of the game is to press the button next to the LED as soon as it turns on. With every correct answer, the game gets a bit harder – the time you have to press the button shortens. How many correct answers can you get?

It’s based on Attiny404 microcontroller, programmed in Arduino. At its back, you’ll find CR2032 battery which makes the kit portable. There’s keychain holder as well. Soldering process is easy enough based on the mark on the PCB.

The kit consists of:
• PCB
• Attiny404 microcontroller
• 4 LEDs
• 4 Pushbuttons
• A switch
• 4 resistors 330ohm
• CR2032 battery holder
• Battery CR2032
• Keychain holder

With the Raspberry Pi breadboard breakout board, you can easily connect your Raspberry Pi with a regular breadboard. It fits on standard half-size and full-size breadboards. It even adds a couple of ground and power supply pins. Best of all, the pins are already soldered. You just have to plug the cable in. This breakout will get you prototyping on the Raspberry Pi in no time!

Product usage tips:

The breakout board is compatible with Raspberry Pi that comes with 40-pin connector. It comes with a HAT ribbon cable for the Raspberry Pi. It has an easyC port for easier connection with other I2C breakout boards.

If the breakout board is not working properly, it’s likely not connected correctly. Check the pinout and the wiring. The culprit might be there. If that’s not the case, check if the HAT ribbon cable is connected as it should be. It should be straight and go to the bottom of the pins.

This driver for stepper motor enables control over a stepper motor that does not require more than 800mA of current and works at up to 14V voltage. Except for the driver, it has built-in LED lights that indicate which phase of the motor is currently active. Connecting with microcontroller is easy, and control is directly through the library.

The USB Type-A connection is still prevalent. If it’s in the electronic devices everywhere around us, it is only natural that we’d want it in our electronic projects. Adding a USB Type-A connection to your circuit is as easy as pie with this breakout board.

The breakout board breaks the GND, D+, D-, and VUSB pins out to the plated through-holes.

Product usage tips:

Male headers for the pads are added and need to be soldered. The breakout board has two mounting holes for placing it on different surfaces.

The USB Type-A connection is still prevalent. If it’s in the electronic devices everywhere around us, it is only natural that we’d want it in our electronic projects. Adding a USB Type-A connection to your circuit is as easy as pie with this breakout board.

The breakout board breaks the GND, D+, D-, and VUSB pins out to the plated through-holes.

Dimensions: 22 mm x 22 mm
Connectors: USB Type-A (female)
Mounting holes: 2

Potentiometers are well known all around, and the sliding potentiometer is just one of its versions. You’ve probably seen it in some music equipment, and now you have the chance to add it to your project!

This board has easyC connector. Thanks to easyC ecosystem, this board can be connected using off-the-shelf cables, without soldering. Controlling the is as simple as it gets, too.

Potentiometers are well known all around, and the sliding potentiometer is just one of its versions.You’ve probably seen it in some music equipment, and now you have the chance to add it to your project!

• Type: linear
• Resistance: 10k
• Dimensions: 86 x 22 mm

The MQ138 sensor is specifically designed to detect various gases, with a primary focus on air quality monitoring. While its main target gas is formaldehyde (HCHO), it is also sensitive to a range of other gases, including volatile organic compounds (VOCs) such as toluene, alcohol, acetone, and hydrogen, as well as other harmful gases commonly found in the environment. It requires a short time to heat up in order to work correctly.

The breakout board provides both digital and analog output through the easyC system. Sensor readings are obtained through the easyC.

Product usage tips:

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

The sensitivity and selectivity of the MQ137 sensor allow it to effectively detect and measure levels of ammonia, making it a valuable tool for applications such as gas leakage detection, agricultural monitoring, and environmental sensing. By integrating the MQ137 sensor with appropriate electronic circuits and microcontrollers like Dasduino, you can create systems that provide real-time monitoring and prompt alerts in the presence of hazardous ammonia concentrations. It requires a short time to heat up in order to work correctly.

The breakout board provides digital and analog information through the easyC system. Sensor readings are obtained through easyC.

Product usage tips:

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

The versatility of the MQ135 sensor allows for its use in applications such as indoor air quality monitoring, gas leakage detection, and environmental sensing. While its main target gas is carbon dioxide (CO2), it is also sensitive to various other gases, including volatile organic compounds (VOCs), alcohol vapors, benzene, smoke, and other harmful gases commonly found in the environment. By integrating the MQ135 sensor with appropriate electronic circuits and microcontrollers like Dasduino, you can create systems that enable real-time monitoring and analysis of gas concentrations, allowing you to take necessary actions to maintain a healthy and safe environment.

The MQ135 air quality measurement module operates at 5V and consumes approximately 150mA. It requires some time to heat up before it can provide accurate results.

The breakout board provides digital and analog information through the easyC system. Sensor readings are obtained through easyC.

Product usage tips:

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

The MQ131-H is the high concentration version of the MQ131 ozone sensor, designed for detecting ozone (O₃) levels in the 10–1000 ppm range. This sensor offers good sensitivity to O₃ and operates on the semiconductor detection principle, making it ideal for industrial and environmental applications.

The sensitivity and selectivity of the MQ131 sensor enable it to effectively detect and measure ozone levels, making it a valuable tool for applications such as air quality monitoring, ozone generators, and ozone leakage detection systems. By integrating the MQ131 sensor with appropriate electronic circuits and microcontrollers like Dasduino, you can create systems that enable real-time monitoring of ozone concentration and trigger alerts when dangerous levels are detected.

The breakout board provides digital and analog readings via the easyC system, allowing smooth integration with platforms that support this interface. Sensor data is easily accessible through easyC.

Product usage tips:

• • When gas is detected, the LED will light up. It will remain off if no gas is detected.

  • The board includes four mounting holes for easy installation.

  • Comes with three male headers for UPDI programming the onboard ATTINY, which is not required for normal usage

We are surrounded by invisible gases everywhere. Although we generally don’t have to worry about them, in certain circumstances they can be very flammable and dangerous. The MQ9 breakout detects carbon monoxide, methane, propane and other flammable gases so that the right measures can be taken in time. The sensor detects carbon monoxide at 10-1000 ppm and other flammable gases at 100-10000 ppm.

The breakout board provides digital and analog information via the easyC system. Sensor readings are obtained via easyC.

Product usage tips:

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

Hydrogen is all around us, and it is dangerous because it is highly flammable. Its leakage can be very dangerous for both life and property. That is why it is important to detect any leakage to prevent such losses in the industry. To do this, hydrogen sensors such as the MQ8 breakout board are used. The sensor detects hydrogen in the range of 100-1000 ppm.

The breakout board provides digital and analog information via the easyC system. Sensor readings are obtained via easyC.

Product usage tips:

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

The sensitivity and selectivity of the MQ7 sensor enable it to effectively detect and measure carbon monoxide levels, making it a crucial tool for applications such as gas leakage detection, security systems, and environmental monitoring. By integrating the MQ7 sensor with appropriate electronic circuits and microcontrollers like Dasduino, you can create systems that enable real-time monitoring and prompt alerts in the presence of hazardous CO concentrations. It requires a short time to warm up in order to work correctly.

The breakout board provides digital and analog information through the easyC system. Sensor readings are obtained through easyC.

Product usage tips:

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.

Humans can detect many smells, but may have difficulty distinguishing gases. That’s why we use sensors like the MQ6 that detects LPG and butane in the air. When heated to the optimal operating temperature, it very quickly detects changes in air concentration between 200 and 10,000 ppm.

The breakout board provides digital and analog information via the easyC system. Sensor readings are obtained via easyC.

Product usage tips:

When gas is detected, the LED will start glowing. It will remain off if it doesn’t detect anything. Four mounting holes enable easy mounting to surfaces. The board comes with three male headers.