Shop

Since the soldering iron is hot during operation, it is necessary to have a safe place to store it. This stand is affordable and serves its purpose. It also contains a sponge in its base on which it is possible to clean the tip of the soldering iron.

Kapton is a special type of material that is resistant to high temperatures and does not conduct electricity. When it is thinly rolled out and adhesive tape is placed on it, we get a kapton tape. In electronics, it is often used to protect plastic components from damage during soldering and as an insulator.

• Tape width: 30mm
• Tape length: 10m

The desoldering wick is a very practical aid during soldering. It is an interwoven copper wire soaked in flux to catch the solder. If you have a spot where you need to remove the solder, this tape will do a great job. Unlike the desoldering pump, this tape can completely remove the solder from the hole or from the pad.

• Length: 1.5m
• Width: 2.0mm

Soldering station with hot air is a combination that will solve all the problems regarding soldering and desoldering, whether it is THT or SMD components. The 50W soldering station has enough power to solder the components with the highest thermal mass, and comes with a pointed tip. Hot air will be useful for soldering and desoldering SMD components. It comes with three extensions with which it is possible to select the width of the hot air flow. With the station also comes a stand for both the soldering iron and for hot air.

• Maximum hot air power: 450W
• Hot air temperature range: 100℃ – 500℃
• Hot air flow: 120L/min max.
• Maximum power of soldering iron: 50W
• Hot air temperature range: 200℃ – 500℃
• Manufacturer and model: Gordak 968
• Input voltage: 230V

Soldering station SS-936A is a more serious part of equipment for electronic workshop. It contains a transformer in its base, thanks to which it can deliver high power at high speed. Therefore, you will easily solder the thickest wires and components to ground polygons. Power is up to 60W, adjustable temperatures up to 500 ℃ with a quality soldering iron that heats up quickly. It comes with spike tip, a soldering iron stand and a sponge for cleaning the tip of the soldering iron. If you are looking for a soldering iron that will serve you for a long time, without spending too much money, the SS-936A is an ideal choice!

The soldering iron is an essential tool for anyone who does something with electronics. Although we enjoy using more expensive soldering irons, this one is affordable and does the job – it will come in handy as a first or spare soldering iron, and with its price, it is affordable to everyone. The process of soldering permanently connects two pieces of metal. In electronics it is the joints between wires, components and boards. Whatever you want to do, you’ll always need to solder something, especially if you’re going to fix electronics – you must have a soldering iron. This soldering iron has a power of 40W, which is quite enough for soldering and desoldering in most cases.

The multimeter, along with the soldering iron, is the basic tool of every electronics engineer. If you are a beginner, this multimeter will be enough for you to learn to measure various physical quantities related to electronics. Measure AC and DC voltage, AC and DC current, resistance, transistor gain, test diodes and conductivity – all with this multimeter. It comes with test cables, and you’ll only need a 9V battery to get started. It also has a fuse to measure current, as a safety supplement.

This is not a multimeter filled with features, this is a multimeter for beginners, pupils and students who want their first, affordable measuring device. The multimeter does not have automatic range determination, has no backlight nor does it measure frequency, but, therefore, it will measure DC voltage up to 1000V, AC voltage up to 750V, DC current up to 10A.

• DC voltage measuring ranges: 200mV, 2V, 20V, 200V, 1000V
• AC voltage measuring ranges: 200V, 750V
• DC current measurement ranges: 200uA, 2000uA, 20mA, 200mA, 10A
• Resistance measurement areas: 200ohm, 2000ohm, 20kohm, 200kohm, 2000kohm
• Maximum current when testing diodes: 1.5mA
• Dimensions: 126 x 70mm

This product contains 9 most commonly used Allen keys in a practical holder. At the end of each Allen key there is a hex head that allows you to tighten the Allen screws from any angle, which can be extremely useful on screws in inaccessible areas.

• Set contains Allen keys of sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 7, 10
• Material: CrV steel

Hex key for standard 2mm head.

• Material: Steel(CrV)
• For 2mm hex heads

The auxiliary arm is a practical desktop tool that allows you to hold PCBs, components, and wires when soldering or working with them. Thanks to the crocodile clips adjustable in all directions, you can attach any type of material and adjust it to an accessible position. The arm itself is heavy and will not move during work. In addition, the third arm, as it is also called, has a magnifier with LED lighting on it, so working with small components will be even easier. If that’s not enough, there is also a soldering iron holder on this auxiliary arm.

• Number of crocodile clips: 2
• LED lighting powering: 3x AAA batteries

Cutting knife is actually a sharp scalpel that you can operate very precisely. It will be very useful for cutting faulty traces on printed circuit boards, but also for any other purpose of precision cutting or marking.

• Material: steel

Classic small pliers as a basic tool of every electronic workshop. It will come in handy for bending components, cutting or just holding.

Every household, let alone a workshop, is not complete without an AC tester. This affordable tester allows you to check for AC voltage in the wires.

To pick up ultra-small components and put them in the right place you simply need to have the right tools. One such are tweezers for SMD components, which will allow you to handle even 0603 components and with a little practice, even smaller ones. Of course, tweezers are ESD safe so you don’t have to worry that something will happen to your components. This set consists of 6 tweezers with which you will be able to place all types of SMD components.

• Number of tweezers inside set: 6

This set of screwdrivers and accessories for working with electronics contains everything you will need when repairing electronics. See the full list below, the set consists of a screwdriver, tweezers, an opening tool, a cutting knife and several opening levers.

• Screwdrivers: Torx 0.8x40mm, T3x40mm, T4x40mm, T5x40mm, T6x40mm, flat 2.0x40mm, philips 1.5x40mm, philips 2.0x40mm
• Cutting knife (traces)
• 2 tweezers
• Opening levers: 2 plastic triangle shaped, 2 plastic levers, 1 metal lever

An oscilloscope is very useful to have nearby – it allows you to display signals depending on the time. Usual problem with oscilloscopes is that they are large and awkward to carry, but with this USB oscilloscope it is no longer a problem! Plug it into a USB port, install drivers and software, plug in the probes and measure. Using special software, you have controls over the device as on a classic desktop oscilloscope. It has 2 channels, measures up to 20MHz and takes 48 million samples per second. It comes with two probes.

If an analog approach to signal processing with an oscilloscope is not enough, (firmware developers, we hear you!) There is also a 16-channel logic analyzer. It will read signals from 0V to 5.5V on 16 channels simultaneously, displaying them on the timeline for easy analysis, so you can accurately measure the duration and decode each digital signal. The logic analyzer software even decodes the data being sent, if it is a standard communication. Comes with 16 quick signal connecting connectors.

Osciloscope
• Frequency range: 20MHz
• Channels: 2
• Sample rate: 48MSa/s
• Memory depth: 1M
• Rise time: 17.5ns
• Time division: 1ns/div – 5000s/div
• Voltage division: 20mV/div – 5V/div

Logic analyzer
• Channels: 16
• Input voltage range: 0V – 5.5V
• Maximum number of samples: 48M
• Frequency range: 10MHz
• Memory depth: 1M/CH

• Connection: USB
• Comes with s 2 PP80B probes
• Dimensions: 200 x 100 x 35mm
• Weight: 300g

High quality USB-C male to USB-C male cable. It is 100cm long, with all communication and power lines.

• Connector side A: USB-C male
• Connector side B: USB-C male
• Length: 1m

Small, industrial power supply in the metal housing allows the conversion of 230V AC to 12V DC voltage of maximum current 3A, power 36W.

Small, industrial power supply in the metal housing allows the conversion of 230V AC to 5V DC voltage of maximum current 4A, power 20W.

Small, industrial 24v 5a power supply in the metal housing allows the conversion of 230V AC to 24V DC voltage of maximum current 5A, power 120W.

The electromagnetic padlock allows the door to be locked via a microcontroller or other external system. This particular can hold up to 180kg with its electromagnet, which is an extremely high force and is intended for use in places where high security is required.  When power is supplied, it activates.

It consists of two parts, an electromagnet and a piece of metal. A piece of metal is installed on the door, while an electromagnet is installed on the door jamb. Comes with all necessary mounting screws. It is waterproof and can be used in outdoor conditions.

• Activation voltage: 12V
• Constant activation current: do 500mA
• Force if can hold: 180kg
• Dimensions: 172 x 40 x 21mm
• Waterproof