Shop

Set of male-female cables for connecting to various modules and components. You simply connect the module to the breadboard. It contains 40 cables of different colors, wire length is 15cm.

• Quantity: 40 cables
• Cable length: 15cm
• different colors for easier recognition

Set of female-female cables for connections with various modules and components.

• Quantity: 40 cables
• Cable lenght: 15cm
• different colors for easier recognition

Set of cables that are used for connecting to the breadboard. The set contains 65 cables that are in different colors and lengths for easier recognition on the breadboard.

Dasduino set for beginners is a complete system for learning programming and basic electronic principles. Using this set You will be able to program the world and electronic devices around You and learn how to program Dasduino in C programming language, connect electronic components and basic things about them. No experience in programming or electronics is needed to work with this set. In the beginning, Croduino lessons help where through 20 mins videos basic concepts of programming and electronics are explained.

Because of the poor choice of microcontroller boards in Croatia, a great quantity of educational material linked to this kit and low prices, the kit is a great choice for classrooms, companies and even colleges. With the minimal price, it brings all that is needed to learn about electronics for the independent production of a project.

Kit consists of:

• Dasduino CORE + USB cable
• Breadboard cables
• Breadboard
• 15x 10k resistor
• 25x 330ohm resistor
• 2x 5mm RGB LED
• 6x 5mm blue LED
• 6x 5mm red LED
• 6x 5mm yellow LED
• 6x 5mm green LED
• DHT11
• 2x photoresistor
• 3x Pushbutton
• Buzzer
• Mosfet IRF540
• 3x 2N2222 transistor
• Shift register 74HC595
• 3x Potentiometer 10k
• 3x 12mm pushbutton

A female connection that is usually found on our power supplies. For use with our controllers and amplifiers.

A male connector that is usually found on our power supplies. For use with our controllers and amplifiers.

This kind of LED strip is unique because each of its diodes has a built-in IC which is able to turn on an LED in 16 000 000 different colors. IC is WS2812 and can control a thousand of these diodes by using just one wire. With this strip, you can create interesting things with minimum effort. This strip is easily controllable by Dasduino.

A classic CR2032 3V battery, used in some watches or remote controllers.

CR1220 3V battery that we use in Croduino Damba.

USB, 0.5m long, mini-B type cable (just like the connection on the Croduino Basic2) – actually it is the same as the one that comes with Basic2 board. It is not a micro-USB so it does not fit to smartphones.

LM317 is one of the most commonly used adjustable voltage regulators. Its voltage is adjustable from 1.7 to 37V, and all that while using 1.5A.

Standard USB A type connector for the Printed Circuit Board(PCB). It can be used as the USB connection, connection for the charger or something else.

Pushbutton is a small button that fits with the breadboard. It has two states: connected(ON – when the button is being pressed) and disconnected(OFF – when the button is not being pressed). It can be used, for example, as a switch. This pushbutton comes in Croduino for beginners set.

A photoresistor is a type of resistor that changes its resistance depending on a light that falls on it. They are super simple for making something that is needed to keep track of the amount of the light(for example, it turns the light on when it is dark).

Potentiometer with mutable resistance from 10k that corresponds with the breadboard. They can be used for various kinds of control, for example adjusting the intensity of LED lights. One of these is also in our Dasduino Beginner Kit.

2N2222 is the most basic NPN transistor that you can find and it can be found in our Dasduino Beginner Kit. It can be used for amplifying Dasduino’s current, as a switch or anything else that you would like to do with the BJT transistor.

Using this 8-bit shift register called 74HC595, you can increase the number of I/O(input/output) codes on your Dasduino/Arduino. Register itself uses 3 codes from the microcontroller, and in return it gives 8 I/O codes. The fact that you can connect a very large number of these registers and get a very large number of I/O codes by using only 3 codes from the microcontroller should not be neglected.

This transistor is also in our Dasduino Beginner Kit.

MOSFET N-channel transistor, with its characteristics, fits great with Dasduino/Arduino. With this transistor, you can control devices that need a great amount of current or great voltages through microcontrollers.

This transistor is also in our Croduino for beginners set.