In this category you can find everything you need for your small electronic laboratory. For example, cleaning chemicals, multimeters, connectors, etc.
Showing 49–72 of 123 results
It is extremely easy to remove insulation and solder with this stranded copper wire. It will serve great in small projects and prototypes.
Since the soldering iron is hot during operation, it is necessary to have a safe place to store it. This stand is affordable and serves its purpose. It also contains a sponge in its base on which it is possible to clean the tip of the soldering iron.
The desoldering wick is a very practical aid during soldering. It is an interwoven copper wire soaked in flux to catch the solder. If you have a spot where you need to remove the solder, this tape will do a great job. Unlike the desoldering pump, this tape can completely remove the solder from the hole or from the pad.
• Length: 1.5m
• Width: 2.0mm
Where do we use flux? Flux is used by soldering. It is used to clean the pcb from any dust or oxidation (if there was any), which results with quality solder connections – solder attaches more easily to the pads where we want to put solder. Besides that, it improves electrical contact. Anyone who has tried it will know!
• Amount: 40g
Warning: Close the flux can after use.
Copper board used for making your own PCBs.
• Number of layers: 2
• Material: FR1
• Copper thickness: 35um
• Dimensions: 160 x 100 mm
Copper board used for making your own PCBs.
• Number of layers: 2
• Material: FR4
• Copper thickness: 35um
• Dimensions: 150 x 100 mm
Copper board used for making your own PCBs.
• Number of layers: 1
• Material: FR4
• Copper thickness: 35um
• Dimensions: 150 x 100 mm
Classic solder for working with a hand soldering iron. In the center of the solder is a solder paste that simultaneously cleans the surface on which it is soldered and allows better adhesion of the solder. This solder is the so-called leaded.
• Quantity: 50g
• Diameter: 1.0mm
• Composition: Sn60Pb40
A 2-in-1 breadboard and PCB is what you get when combining the simplicity of the one and functionality of the other. It is the same size as the modular mini breadboard and has the same connections to pins. This PCB lets you move your circuit from a temporary connection on a classic breadboard to a more permanent place by soldering all the pieces.
Product usage tips:
The board can be secured in place by using the two mounting holes in the middle.
Protoboard used for the permanent connection (also known as soldering) of electronic components. High quality, with solder mask on one side, as well as column and row markings.
• Dimensions: 15cm x 9cm
Protoboard used for the permanent connection (also known as soldering) of electronic components. High quality, with solder mask on both sides, as well as column and row markings.
Protoboard used for the permanent connection (also known as soldering) of electronic components. High quality, with solder mask on one side, as well as column and row markings.
• Dimensions: 7cm x 9cm
Protoboard used for the permanent connection (also known as soldering) of electronic components. High quality, with solder mask on one side, as well as column and row markings.
• Dimensions: 6cm x 4cm
Silicone-based viscous oil that will reach even the most inaccessible places. It has high insulating properties and eliminates all types of unwanted currents, which makes it suitable for use in electronics.
• Package: 100mL
Kontakt S is used to remove oxides and sulfides from electrical contacts and it protects against corrosion. This ensures a smooth flow of current through the connector, even in cases of already oxidized and worn contacts. It is especially useful in audio products, where the cleanliness of the contact is crucial.
• Package: 400mL
• Spray
• Density: 0,74g/cm3
Isopropyl alcohol is a high purity alcohol that can often be found in every workshop. It is useful for cleaning printed circuit boards because it evaporates quickly, and allows the removal of fatty deposits (such as traces of flux and paste) and dirt. It is also used with 3D printers to clean the print substrate and for all other applications where cleanliness is sought. It is important to note that it has antibacterial action.
• Package: 250mL
• Dispersion:spray
• Purity: 96%
Kontakt U spray is a mixture of a substance used to clean filled electronic boards and electrical contacts. Removes grease, dust, oils, silicones, sulfides and oxides, as well as all residues after soldering (including rosin and flux).
• Package: 400mL
• Density: 0,74g/cm3
Isopropyl alcohol is a high purity alcohol that can often be found in every workshop. It is useful for cleaning printed circuit boards because it evaporates quickly and removes grease deposits (such as flux or paste traces) and other impurities. It is also used with 3D printers to clean the print surface and for all other applications where purity is required. It is important to note that it is antibacterial.
• Packaging: 300mL
• Dispersion: syringe
• Purity: 96%
Printed boards during soldering and various repairs very often remain dirty from flux and other impurities. To avoid gradual degradation of solder quality, oxidation, and potential short circuits, the tiles need to be cleaned. This spray will help significantly here, and the brush that comes with the spray will further help remove dirt mechanically.
• Package: 400mL
Kapton is a special type of material that is resistant to high temperatures and does not conduct electricity. When it is thinly rolled out and adhesive tape is placed on it, we get a kapton tape. In electronics, it is often used to protect plastic components from damage during soldering and as an insulator.
• Tape width: 30mm
• Tape length: 10m
Flux is used during soldering to clean the board from dirt and possible oxidation (if any) which results in quality solder joints – solder is much easier to catch in the solder spot. In addition to cleaning, it also provides better wetting properties, which means that the solder will adhere better and more properly to the legs of components or solder joints. All this makes soldering much easier. This liquid solder is applied with a brush to the solder spots on the tile.
• Quantity: 15mL
• Density: 0,794g/cm3
• Soluble in water
REMARK: Be sure to close the flux after use.
Hex key for standard 2mm head.
• Material: Steel(CrV)
• For 2mm hex heads
Every household, let alone a workshop, is not complete without an AC tester. This affordable tester allows you to check for AC voltage in the wires.
Electrical tape is well known to everyone – it provides insulation between various connections. This is an extra-large, 30m roll. The color you receive will be randomly selected.