In this category you can find everything you need for your small electronic laboratory. For example, cleaning chemicals, multimeters, connectors, etc.
Showing 1–24 of 112 resultsSorted by average rating
Protoboard used for the permanent connection (also known as soldering) of electronic components. High quality, with solder mask on both sides, as well as column and row markings.
The multimeter, along with the soldering iron, is the basic tool of every electronics engineer. If you are a beginner, this multimeter will be enough for you to learn to measure various physical quantities related to electronics. Measure AC and DC voltage, AC and DC current, resistance, transistor gain, test diodes and conductivity – all with this multimeter. It comes with test cables, and you’ll only need 2 AAA batteries to get started. It also has a fuse to measure current, as a safety supplement.
If you are looking for a best buy multimeter for your workshop, to work for years (probably centuries) and give reliable readings, you have found it. The multimeter does not have automatic range detection, no backlight or frequency measurement, but it will measure DC voltage up to 1000V, AC voltage up to 750V, DC current up to 10A, capacity up to 100uF, resistance up to 200Mohm. It has a buzzer to conduct conductivity and it has an automatic shut-off.
• DC voltage measuring ranges: 200mV, 2V, 20V, 200V, 1000V
• AC voltage measuring ranges: 200mV, 2V, 20V, 200V, 750V
• DC current measurement ranges: 2mA, 20mA, 200mA, 10A
• Capacity measurement areas: 20nF, 200nF, 2uF, 20uF, 200uF
• Resistance measurement areas: 200ohm, 2000ohm, 20kohm, 200kohm, 2Mohm, 20Mohm, 200Mohm
• Dimensions: 190 x 90mm
This high-quality solder wire (Sn63Pb37) offers a 63/37 tin-lead ratio, ideal for precision electronics work. With a 1mm diameter and 17g weight, it provides excellent flow and smooth joints for reliable connections. Perfect for professionals and hobbyists, this wire ensures strong, durable soldering with low melting temperature and minimal residue. Suitable for a wide range of applications, from circuit boards to delicate components. Packaged at 17g, it’s lightweight and easy to handle, making it a great addition to any toolkit.
This high-quality solder wire offers excellent performance with a composition of 99% tin, 0.7% copper, and 0.3% silver. Ideal for precision soldering, it provides strong joints and reliable conductivity. The 1mm diameter is perfect for electronics, circuit boards, and general repairs. Packaged at 17g, it’s lightweight and easy to handle, making it a great addition to any toolkit.
Electrical tape is well known to everyone – it provides insulation between various connections.
It is extremely easy to remove insulation and solder with this stranded copper wire. It will serve great in small projects and prototypes.
The wire comes in a 5m package and is available in red, black, and white.
Kapton is a special type of material that is resistant to high temperatures and does not conduct electricity. When it is thinly rolled out and adhesive tape is placed on it, we get a kapton tape. In electronics, it is often used to protect plastic components from damage during soldering and as an insulator.
Standard M3 countersunk head screw.
The threaded insert is used to repair a damaged thread, for inserting into soft materials where it provides a permanent thread (eg. plastic).
As the name suggests, a spare handle for the soldering station from our offer.
Workshop organization is very important, and what is better for storing components than well-organized containers? There are 20 of these containers in a package and they are ideal for storing electronic components. They are quite large, so you can store larger products. We use identical ones like this in our warehouses! On the front of each tray, there is a space where you can stick a label with the description of the component inside. The containers can be taken apart and put back together, so they can be used in various stacking configurations.
Workshop organization is very important, and what is better for storing components than well-organized containers? There are 20 of these containers in a package and they are ideal for storing electronic components. They are quite large, so you can store larger products. We use identical ones like this in our warehouses! On the front of each tray, there is a space where you can stick a label with the description of the component inside. The containers can be taken apart and put back together, so they can be used in various stacking configurations.
A well-organized workshop is a very important thing. Is there a better way to save components than well-organized compartments? This cabinet comes with 12 transparent drawers ideal for storing electronic components. On the front of each drawer, there is a space where it’s possible to add a label.
Electrical tape is well known to everyone – it provides insulation between various connections. This is an extra-large, 30m roll. The color you receive will be randomly selected.
Spare oscilloscope probe.
A logic analyzer allows you to record and display a signal, usually a bus, on your computer screen in real time. It is powered via USB, and simultaneously records up to 8 channels. Cables are also included.
This PCB is also a protoboard. It offers both the simplicity and the functionality of a breadboard. It is the same size as the modular half-size breadboard and has the same connections to pins. The board allows you to make the temporary circuit from the breadboard permanent.
Product usage tips:
The board has three mounting holes for secure placement on different surfaces.
A 2-in-1 breadboard and PCB is what you get when combining the simplicity of the one and functionality of the other. It is the same size as the modular mini breadboard and has the same connections to pins. This PCB lets you move your circuit from a temporary connection on a classic breadboard to a more permanent place by soldering all the pieces.
Product usage tips:
The board can be secured in place by using the two mounting holes in the middle.
Classic power adapter which converts other power connectors to EU schuko power connector
Classic solder for working with a hand soldering iron. In the center of the solder is a solder paste that simultaneously cleans the surface on which it is soldered and allows better adhesion of the solder. This solder is the so-called leaded.
• Quantity: 50g
• Diameter: 1.0mm
• Composition: Sn60Pb40
Protoboard used for the permanent connection (also known as soldering) of electronic components. High quality, with solder mask on one side, as well as column and row markings.
• Dimensions: 6cm x 4cm
Classic pliers for precise cutting of the legs after soldering or for cutting the wire and removing the insulation.
Since the soldering iron is hot during operation, it is necessary to have a safe place to store it. This stand is affordable and serves its purpose. It also contains a sponge in its base on which it is possible to clean the tip of the soldering iron.
Kapton is a special type of material that is resistant to high temperatures and does not conduct electricity. When it is thinly rolled out and adhesive tape is placed on it, we get a kapton tape. In electronics, it is often used to protect plastic components from damage during soldering and as an insulator.
• Tape width: 30mm
• Tape length: 10m