Shop

Once you learn how to solder, you notice that your soldering isn’t perfect. Desoldering pump is a tool that should be on the table of each maker/electronics engineer because it allows easy removal of excess solder, thus repairing short circuits or removing the components from the board. It works on the principle of “sucking in” the solder (liquid state) inside itself. It is completely safe to use.

The active GPS antenna is the perfect solution for enhancing the GPS signal reception of your device. It features a 3-meter long cable with a standard SMA male connector, providing you with ample length for flexible installation. The antenna’s magnetic base allows for easy and secure mounting on any metal surface, making it ideal for a wide range of applications.

This high-performance antenna operates on a frequency of 1575.42MHz and offers a 28dB of amplification, ensuring a strong and stable GPS signal. With a voltage range of 3V-5V and a low current consumption of 10mA max, it is both efficient and versatile. Its circular (RH) polarization further enhances signal quality, providing you with reliable and accurate positioning data for your projects.

Whether you are building a vehicle tracking system, a drone, or any other project that requires precise GPS data, this active antenna is an excellent choice. Its compatibility with popular platforms like Arduino and Raspberry Pi makes it a go-to component for makers and hobbyists. The compact dimensions of 45mm x 39mm x 13mm allow for seamless integration into your setup.

• Connector: SMA male
• Frequency: 1575.42MHz
• Voltage: 3V-5V
• Current: 10mA max.
• Polarization: circular(RH)
• Amplification: 28dB
• Dimensions: 45mm x 39mm x 13mm

Infra-red (IR) diode emits light in the spectrum that the human eye can’t see. However, such a diode has its purpose. It is used in remote controllers that send information on wavelengths within the infrared spectrum, e.g. to change television programme. So all you need to create your own remote is one of these diodes and correct data which will be sent!

We all know what HDMI cable is and we offer it because it’s required to connect Raspberry Pi with an external monitor. This is a classic male-male HDMI cable.

Length: 1m

Improve your DIY and automation projects with our 5V Mini Water Pump. Engineered for integration with Arduino and other microcontrollers, this compact pump is the ideal solution for hobbyists, educators, and makers. It’s small footprint and efficient operation make it perfect for a wide array of applications where precise fluid transfer is essential, from educational robotics to model designs.

Designed with your creative options in mind, this mini water pump excels in various scenarios. Easily create automated plant watering systems to keep your indoor garden alive, or develop innovative liquid dispensing mechanisms for your custom projects. Its robust design ensures reliable performance, making it a component for any project requiring controlled water movement.

Experience ease of use and broad compatibility; this 5V Mini Water Pump offers straightforward setup, allowing you to quickly incorporate it into your circuits without complex configurations. Its low power consumption and durable construction guarantee long-term functionality, providing a cost-effective and dependable solution for all your fluid dynamics needs. Elevate your projects with a pump that combines efficiency, adaptability, and the power to bring your ideas to life.

• Voltage: 3V – 6V
• Max. liquid ejecting height: 40-110cm
• Flow speed: 120L/h
• Exterior diameter of drain tube: 7.5mm
• Interior diameter of drain tube: 4.7mm
• Pump dimensions: 24mm(diameter), 33mm(height)

easyC is a system developed by Soldered to establish easy connections between different I2C devices: microcontrollers, sensors, actuators. Connecting is easy and fast with pre-assembled cables. This connector is located on every easyC-compatible product.

SPDT (single-pole, dual-throw) is a simple sliding switch that connects the central contact with one of the other two contacts in its housing.

The IR receiver is a device that detects the modulated IR radiation emitted by the remote controls. The IRM-56384 detects IR radiation on a standard frequency of 38kHz and outputs signal to its output pin, which can be read with a microcontroller. Thus, it enables project management via the remote control.

RFID card is white and the size of standard credit card. We promise that it will fit into any standard wallet! Comes with random unique code.

RFID card comes in two variants, 125kHz or 13.56MHz.

GSM SMA Connector antenna with standard SMA male connector for connecting to your GSM PCBs.

• Amplification: 3dBi
• Frequency range: 900 – 1800 MHz
• Length: 50mm
• Vertical polarization

JST (more precisely JST XH) connectors are today the most common connectors for rechargeable lithium batteries but are also used for many other applications where a fast, easy and convenient connection is required.

• Exact name: JST XH 2pin
• Mounting method: cable
• The distance between pins: 2.00mm
• Female connector

JST (more precisely JST XH) connectors are today the most common connectors for rechargeable lithium batteries but are also used for many other applications where a fast, easy and convenient connection is required.

The JST XH 2-pin male SMD connector for modern electronics, recognized for its reliability and ease of use. This connector is fully compatible with our range of Li-Ion batteries! Primarily used in rechargeable lithium battery applications, its versatility extends to a broad range of projects requiring secure and convenient electrical connections. This connector’s compact surface-mount design (SMD) makes it an ideal choice for space-constrained applications, ensuring a clean and efficient layout on printed circuit boards.

Engineered for integration, this JST XH connector features a 2.00mm pin pitch, ensuring compatibility with standard JST XH female connectors. Its construction guarantees stable performance, making it suitable for both prototyping and mass production environments. Whether you’re building custom battery packs, integrating power solutions into embedded systems, or developing Arduino-compatible devices, this connector provides the interface you need.

With our JST XH 2-pin male SMD connector comes a comprehensive documentation, 24/7 lifetime technical support, and a 2-year warranty. We ensure transparency and community support, empowering makers and engineers to innovate with confidence. Choose this connector for its secure connection with minimum added resistance.

Battery clip for a 9V battery. It allows connecting a circuit to the 9V battery.

Plastic holder for 1 AA battery, with 1 hole for mounting.

• Battery size: AA
• Number of batteries: 1
• Wire length: 10cm

Plastic holder for three AAA batteries, with three holes for mounting. Connects batteries in series.

• Battery size: AAA
• Number of batteries: 3
• Wire length: 9.8cm

Plastic holder for two AAA batteries, with three holes for mounting. Connects batteries in series.

• Battery size: AAA
• Number of batteries: 2
• Wire length: 15cm

Plastic holder for two AA batteries, with two holes for mounting. Connects batteries in series.

• Battery size: AA
• Number of batteries: 2
• Wire length: 15cm