Shop

Well known protoboard 2 x 8 cm. Can be used for all of the ongoing mergers and soldering. Very good quality.

Banana connectors are quite standard connectors in electronic labs because they allow fast and firm connection.

This antenna is designed for 433MHz modules from our offer and improves their range even up to 300%. It works both as a receiver and as an emitter.

• Frequency range: 433MHz (+-6MHz)
• Amplification: 2.2dBi
• Impendance: 50ohm
• Maximum power: 30dBi

Desoldering wick is a very practical tool for every workshop. It’s a braided copper wire, soaked in flux, so it catches solder effectively. If you have a spot from which you need to remove the solder, this strip will do a great job. Unlike the discharge pump, this strip can completely remove the solder from a hole or a pad. 1.5m should last long since you spend only one or two centimeters per one desoldering.

• Lenght: 1.5m
• Width: 1.9mm

Over the years of working on new products, prototyping and experimenting, we have collected many different electronic components and PCBs. You could probably have one drawer for which you are no longer certain what it contains. Imagine this on a greater scale- that’s what we ended up with 🙂

Now we have decided to get rid of it. We made packages with these components, tried getting everyone more or less the same value and decided to sell them for HRK30 per pack. Well if you want to try your luck – here’s the chance!

NOTE: All packages are randomly packed and there is no option to select a special package. Since this is a sale, these products can not be returned and no refunds are available if you aren’t happy with what you got.

Isopropyl alcohol is an alcohol of high purity which can be found in almost every workshop. It is useful for cleaning printed circuit boards, because it evaporates quickly and allows the removal of greasy deposits (such as traces of flux/paste) and dirt. It is also used in 3D printer cleaners and all other applications where cleanliness is important. NOTE: it also has antibacterial properties.

Bluetooth Module HM-10 enables Bluetooth 4.0 (BLE 4.0) communication between your project and another Bluetooth device, such as mobile phone. A connection with Croduino is simple via serial communication and the module operates at standard voltage of 3.3V and 5V. This module will work with iOS6 and higher systems as well as with Android 4.3 and greater.

• Bluetooth standard: 4.0
• works with iOS6 or higher and  Android 4.3 or higher
• Voltage: 3V – 6V
• Current: 60uA – 400uA
• Antenna: on the PCB
• Dimensions: 43mm x 16mm

MG995 is a powerful servo motor that is capable of spinning and controlling things that a small hobby servo motor could never accomplish doing. It comes with a bunch of accessories so you could connect it easily with the outer world, and it’s being controlled like every other servo motor, via PWM.

This lithium-ion battery is small, light and durable. Through standard JST 2mm female connector, it will yield 3.7V which will supply your projects for a whole day (and night!). Furthermore, the battery has an implemented protection system, which prevents high voltages ( prevents over-charging), undervoltage and short circuit. That way it protects the battery, increases its lifetime and protects you from possible accidents!

This small battery is practical for smartwatch projects or other projects where battery dimensions are crucial.

• Nominal voltage: 3.7V
• Capacity: 40mAh, 0.15Wh
• Dimensions: 24 x 8.5 x 3.5mm
• Standard JST-PH-2mm connector

DISCLAIMER: This battery has to be charged with a special charged that uses CC/CV principle. Li-ion batteries are dangerous! Read our tutorial (link in the top right corner) before use.

• Frequency: 32.768kHz
• Crystal

Banana connectors are a pretty standard type of connection inside electronic labs because they provide fast and firm connection.

Banana connectors are a pretty standard type of connection inside electronic labs because they provide fast and firm connection.

• Diameter: 4mm
• Color: red
• Male connector

Banana connectors are a pretty standard type of connection inside electronic labs because they provide fast and firm connection.

• Diameter: 4mm
• Color: black
• Male connector

Aligator clips are practical for quick connections during prototyping/testing. You can solder any type of wires to these clips.

Aligator clips are practical for quick connections during prototyping/testing. You can solder any type of wires to these clips.

Aligator clips are practical for quick connections during prototyping/testing. You can solder any type of wires to these clips.

Aligator clips are practical for quick connections during prototyping/testing. You can solder any type of wires to these clips.

Small audio speaker ideal for radio and projects including amplifiers. Diameter is only 57mm and yet it provides enough power.

KW12-3 is a standard microswitch – it’s activated by the external force on the lever. Releasing the force we deactivate it. This system is very quick and practical, it allows dynamic changes in the switch. The lever itself is able to rotate – it has a little wheel on the top. Microswitches like these are used in PC mouses, automobile industry, communication devices, microwave oven doors etc.

We all know these Mini DC motors, especially if you ever took apart any kind of toy. They’re everywhere, now and on Soldered as well. You can use it to make something useful or just reminisce about the times when you were younger.

A phototransistor is a component that is able to detect light. This phototransistor is special because (due to their dark lenses) it detects infrared (IR) light better than the other. Therefore, it is practical for fire detection, sunlight etc.

Soldered has created a module with an LM393 voltage comparator using this sensor. Check it out here.